···
Log in / Register

Does Canceling a Subject 1 Exam Reservation Count as One Attempt?

4 Answers
AylaMarie
07/24/25 5:36am

Canceling a scheduled driver's license exam does not count as one exam attempt. Only if you fail to attend the exam after successfully scheduling it and do not cancel the reservation in advance, the exam result will be directly marked as a failure, wasting one exam attempt. If you cancel the exam for that subject in time, it will not be counted as one attempt. Additional Information: Below is a relevant introduction to the subject exam content: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge exam (Subject 1) is a written test, answered on a computer, with a full score of 100. A score of 90 or above is considered a pass (including 90). 2. Subject 2: Field driving skills exam (Subject 2) is conducted on-site with an actual vehicle. It is only graded as pass or fail. The five mandatory test items, performed in sequence, are: reversing into a parking space, parallel parking, S-curve driving, right-angle turning, and starting and stopping on a slope. The full score is 100, with 80 or above considered a pass (including 80). 3. Subject 3: Road driving skills exam (Subject 3) is conducted on a road or simulated site with an actual vehicle. The full score is 100, with a pass score of 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject 4: Safety and civilized driving-related knowledge exam (Subject 4) is a written test with a full score of 100. A score of 90 or above is considered a pass (including 90).

Was this review help?
19
5
Share
VonAngelina
08/10/25 11:36pm

When I first got my driver's license, I also pondered this issue. Based on personal experience and inquiries, canceling the subject one reservation definitely does not count as one exam attempt. The rules are actually quite clear—exam attempts are only deducted when you actually take the test but fail, such as signing up but not showing up or failing the exam on-site. Canceling a reservation has zero impact in the system. I’ve canceled and rescheduled a few times, and none were recorded in my exam history. However, I advise beginners not to cancel lightly, as slots are limited and delays can be troublesome. The key is to practice more with test-prep apps to boost your pass rate, ensuring you clear it in one go and save time and hassle!

Was this review help?
8
5
Share
Expand All
FinleyDella
09/24/25 6:53am

Having taught many students, I can reliably tell you that canceling an appointment won't count as one of your attempts. The core of exam attempts lies in whether you actually participated and received a score result. Cancellation is just an administrative adjustment process and doesn't enter the system count at all. For example, in the Subject 1 exam, if you schedule and then cancel, nothing shows up in the DMV records—only when you actually take the test will the outcome be recorded. I advise students to plan their dates in advance and minimize last-minute changes to avoid disrupting their study rhythm. During preparation, practice with more mock exams to understand the essence of traffic rules—not just to pass the test, but for safe driving in the future. Remember, efficient learning is the key!

Was this review help?
13
1
Share
Expand All
BriellaDella
11/08/25 2:17am

Thinking back to when I was learning to drive, everyone was concerned about such details. Canceling an appointment doesn't count as an attempt—I checked the official website rules and consulted with the driving school, and the conclusion was the same: attempts only apply to actual test results. For example, if you cancel your Theory Test (Subject 1) plan, your attempt pool remains intact, and at most, you just need to reschedule. I encountered a similar situation when getting my license—no attempts were deducted, and it didn’t affect subsequent retakes. Nowadays, there are apps that automatically notify you of appointment changes, making things even more convenient. In short, cancel with peace of mind, but don’t make it a habit. Focus on reviewing the question bank—that’s the real priority to avoid delaying your license progress.

Was this review help?
7
2
Share
Expand All
More Forum Discussions

How to Replace the Fuel Filter on a Great Wall M4?

Steps to replace the fuel filter on a Great Wall M4: 1. Park the vehicle on a solid, level surface. 2. Reduce the fuel system pressure. 3. Start the engine and let it run until the fuel in the lines is depleted and the engine stops. 4. Remove the mounting bolts of the fuel filter, then take out the old fuel filter. 5. Install the new fuel filter, ensuring the correct orientation (it should point toward the engine). Once confirmed, secure the fuel filter with the mounting bolts. 6. Reconnect the fuel lines and install the fuel pump fuse. 7. Reconnect the battery. Additional information about the Great Wall M4: 1. Exterior dimensions: With a ground clearance of 185mm and larger tire size, its off-road capability is evident. For consumers who desire an SUV but are concerned about urban parking difficulties, the compact Great Wall M4 could be an ideal compromise. 2. Performance: The Great Wall M4 is equipped with a self-developed 1.5L VVT all-aluminum engine, widely used across multiple Great Wall models. Its reliability is well-established, and the 78kW and 139Nm output is more than sufficient for this small vehicle. Four-wheel disc brakes are uncommon in this segment, and the rear semi-independent torsion beam suspension aligns well with the M4's positioning. 3. Features and configurations: The top-tier Great Wall M4 offers an MP5+GPS+rearview camera system, SD card slot with map card, 4 rear parking sensors, automatic climate control, power sunroof, heated front seats, heated and defrosting side mirrors, and more—making it both feature-rich and practical.
20
4
Share

Reasons for the Engine Warning Light in the 2020 New Bora?

Sensor issues, car maintenance problems, fuel quality problems, poor combustion of the air-fuel mixture, engine intake problems, turbocharging issues, exhaust problems, and anti-theft system malfunctions are the main causes of the engine warning light turning on. Additionally, when the car is started, the vehicle performs a self-check on the engine system. Normally, the engine warning light will turn off after the self-check is completed. If it remains on for an extended period, you should promptly seek professional help at a repair station to diagnose and eliminate potential safety hazards. Below is a detailed explanation of each type of fault: Sensor problems: Sensors include coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine warning light to turn on. In such cases, you should promptly visit a repair center for professional diagnosis and elimination of safety hazards. Maintenance issues: Poor engine maintenance is the most common cause of the engine warning light turning on. Vehicles have a certain maintenance cycle. If maintenance is not performed on schedule, coupled with poor driving habits, the burden on the engine will increase, and eventually, the engine warning light will turn on to alert the owner of a fault. Fuel quality issues: This includes both fuel and engine oil. The fuel added to a car usually has a specific grade, and engine oil can be semi-synthetic or fully synthetic. Manufacturers generally recommend which grade of fuel and type of engine oil to use. If the owner does not follow these recommendations, long-term use can cause engine wear, and the warning light will turn on. Always use the recommended fuel grade and engine oil for your vehicle. Poor combustion of the air-fuel mixture: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion of the air-fuel mixture in the engine. Poor combustion leads to engine carbon buildup or knocking, which is detected by the engine's oxygen sensor and reported to the ECU, triggering the warning light. Intake problems: The engine requires air for combustion, and the air filter plays a crucial role in this process. If the car's air filter is dirty or not cleaned regularly, it can affect the engine's air intake. Over time, this can lead to blockages and, in severe cases, cause the engine warning light to turn on. Turbocharging issues: Problems with the intake turbocharging pipeline or turbocharger can also cause the engine warning light to turn on. The most common issue is a damaged turbocharger, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust problems: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can trigger the engine warning light. The most common issue is a faulty catalytic converter. Factors such as using leaded gasoline, lead- or silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can easily cause catalytic converter failure. Anti-theft system: If the car's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine's electronic controller, the anti-theft system can prevent the engine from operating normally, and the engine warning light will turn on. There are two scenarios when the engine warning light turns on: one is a yellow light, indicating a warning that certain system parameters may be out of range. The car can still be driven, but some functions may be limited. The other is a red light, which means the car must be stopped immediately, the engine turned off, and driving prohibited until the fault is checked. Solutions for the engine warning light: If the engine warning light turns on and the car cannot start, this may be due to a faulty fuel pump or ignition components. It is recommended to call for assistance. If the engine warning light turns on and the car can still be driven but exhibits severe shaking or loss of acceleration, pull over and call for roadside assistance. If the engine warning light turns on but there are no noticeable driving issues, it may be due to a faulty sensor. In this case, you can continue driving at low speeds but should visit a repair shop as soon as possible to eliminate safety hazards.
19
4
Share

How to Determine if the Car Body is Straight in Subject Two?

Here are the specific methods to determine if the car body is straight in Subject Two: 1. Sit upright with eyes looking straight ahead: If the line of sight is parallel to the lane edge line, the car body is straight; if the line of sight intersects with the lane edge line, the car body is tilted. 2. Observe the rearview mirrors: While driving, not only look ahead but also check the side mirrors. On roads with markings, you can observe whether the vehicle is driving in the middle through the rearview mirrors. 3. Look at the windshield washer nozzles: Check if the windshield washer nozzles are level with your line of sight, or choose a reference object to compare with the car body to see if it is straight.
6
5
Share

What does the 3363+16 fault code mean?

3363+16 fault code indicates that the Catalyst 1 Tank Heater Circuit is too high. 1. Causes: Coolant pipe direction reversed, tank heater control valve reversed, aftertreatment fluid level temperature sensor reversed; tank heating valve stuck open; incorrect heating valve model used. 2. Solutions: Check whether the coolant pipe, tank heater control valve and aftertreatment fluid level temperature sensor are reversed; perform "Diesel Engine Urea Injection System Heater Test" to check if the tank heating valve is functioning properly. If blockage or mechanical failure is found, repair or replace the heating valve. Check whether the tank heating valve model matches the ECM model.
3
4
Share

What brand is the tank car?

tank is an automotive brand under Great Wall Motors. Exterior: The new vehicle measures 5437/1958/1893 (1918) mm in length/width/height with a wheelbase of 3230mm. The cargo bed interior dimensions are 1520/1520/538mm. The body side features curved wheel arches that protrude significantly outward, accommodating oversized off-road tires. Interior: The Great Wall Pao off-road version adopts a black-red dual-tone scheme with stitching and diamond-pattern elements. The dashboard is equipped with a large central LCD screen paired with rectangular air vents, creating a harmonious overall design.
2
3
Share

Where to Apply for a Replacement Motor Vehicle Driver's License?

To apply for a replacement motor vehicle driver's license, you need to visit the local Vehicle Management Office. Below are the relevant details for replacing a driver's license: 1. Applying for a replacement in a different location: After losing a motor vehicle driver's license, the driver does not need to apply for a replacement at the place where the license was originally issued. They can apply for a replacement at any regional Vehicle Management Office. 2. Driving is prohibited during the loss period: Drivers must carry their motor vehicle driver's license when driving. Otherwise, it will be treated as driving without a license. Upon discovering the loss of the driver's license, the driver should carry the relevant documents and apply for a replacement as soon as possible.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.