Does Camry belong to GAC or FAW?

1 Answers
DelRuby
07/24/25 4:25pm
Camry belongs to GAC and is under GAC Toyota. GAC Toyota Motor Co., Ltd. is a joint venture established and operated by Guangzhou Automobile Group Co., Ltd. and Toyota Motor Corporation with a 50:50 equity ratio. GAC Toyota produces models including the CAMRY, HIGHLANDER, CHR, YARiS L, LEVIN, and YARiS L series sedans. The Camry is a mid-size car with dimensions of 4885 mm in length, 1840 mm in width, and 1455 mm in height, and a wheelbase of 2825 mm. The front suspension of the Camry is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
Was this review help?
2
1
Share
More Forum Discussions

How many liters of engine oil should be added to the 10th-generation Accord?

The 10th-generation Accord requires 4 liters of engine oil. Precautions for changing engine oil: When adding engine oil, ensure that the oil level is between the min and max marks on the dipstick. The oil level should not be below the min mark or above the max mark. If the oil level is below the min mark, it may cause insufficient lubrication in the engine, leading to increased wear. If the oil level is above the max mark, it may increase engine resistance during operation, resulting in reduced power and higher fuel consumption. Always check the oil level carefully when adding oil. Oil change precautions: Engine oil should be changed regularly. Different types of oil should not be mixed. Purchase high-quality full synthetic oil, which should be changed every 8,000-10,000 km. Semi-synthetic oil should be changed every 5,000-8,000 km, and mineral oil should be changed every 5,000 km. Regularly clean the engine air filter and replace the oil filter. After adding oil, sludge and carbon deposits on engine parts will disperse into the oil, causing it to turn black over time. Typically, the viscosity of the oil should be used to determine whether it needs to be changed, rather than relying solely on the color. If the oil level is too low, insufficient lubrication may cause cylinder scoring. If the oil level is too high, it may affect vehicle performance and increase fuel consumption.
19
1
Share

What is the tire model and specification of the Zotye T600?

The original tire configuration model of the Zotye T600 is 235/60R18. The first number 235 represents the tire width of 235MM, 60 indicates the tire's aspect ratio is 60%, meaning the section height is 60% of the width. The letter R stands for radial tire, and 18 represents the rim diameter of 18 inches. The Zotye T600 has a maximum speed of 185km/h and a fuel consumption of 8.6L per 100km. In addition to the model, the tire also displays the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as "Standard rim 5.00F".
20
3
Share

What does Toyota KDSS mean?

Toyota KDSS is an electronically controlled kinetic dynamic suspension system, whose main function is to improve off-road driving passability and stability, as well as on-road comfort and handling. KDSS connects the front and rear hydraulic stabilizer links into a closed system through bidirectional hydraulic pipelines. The two hydraulic links respectively replace the small vertical links on the upper side of the front and rear anti-roll bars, and there is also an accumulator in the middle of each pipeline. Toyota Motor Corporation is an automobile manufacturing company with products including Crown, Reiz, Prius, Corolla, Vios, Camry, etc. Taking Camry as an example, it is a model under GAC Toyota. In terms of body size, this car has a length, width, and height of 4900mm, 1840mm, and 1455mm respectively, with a wheelbase of 2825mm. In terms of appearance, the Camry luxury version adopts a huge trapezoidal horizontal bar grille, with a streamlined body posture, lower waistline, and an extended roof rear to increase rear headroom; the sports version adopts a three-layer grille front face, and for the first time uses a two-tone body and 'pure black' cabin design, with a bilateral four-exhaust pipe design at the rear.
2
4
Share

Where to Go for Driver's License Renewal Upon Expiration?

The process for renewing an expired driver's license is as follows: The motor vehicle driver should bring the required materials to the vehicle management office where the driver's license was originally issued to apply for renewal. The vehicle management office will process the renewal within one working day after approval. Materials required for renewal: Bring two copies of ID card, two recent 1-inch color photos without hats, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital (free medical examination is also available at the vehicle management office). In addition to applying for renewal at the vehicle management office, you can also apply for renewal through the following methods: Renewal via the "Traffic Management 12123" APP. Download the "Traffic Management 12123" APP, select Service Center -- Expired License Renewal Service -- fill in the information. The new license is generally delivered by mail. Go to the "Police-Medical-Post" service point at the post office to process the renewal. The entire process, from registration to medical examination to the production of the new license, takes only half an hour. Currently, only a few cities have opened this service, such as Hangzhou.
10
4
Share

What is the difference between a 7-speed dual-clutch and an 8-speed automatic manual transmission?

The differences between a 7-speed dual-clutch and an 8-speed automatic manual transmission are as follows: 1. The 7-speed dual-clutch is more fuel-efficient than the 8-speed automatic manual transmission. 2. The 7-speed dual-clutch shifts faster than the 8-speed automatic manual transmission. 3. The 8-speed automatic manual transmission has 8 levels of gear shifting, one more than the 7-speed dual-clutch's 7 levels. More details are as follows: 1. The 7-speed dual-clutch represents a transmission that can achieve 7 levels of gear shifting. The dual-clutch means that the clutch can engage and disengage simultaneously, primarily to make gear shifts smoother and reduce jerking. However, this may not be very noticeable in regular cars and is almost the same as an 8-speed automatic manual transmission, only becoming apparent in racing cars. 2. Compared to automatic transmissions, dual-clutch transmissions are more fuel-efficient. Theoretically, dual-clutch transmissions shift faster than automatic transmissions and offer better handling. 3. The 8-speed automatic manual transmission means the transmission has 8 levels of gear shifting. The automatic manual transmission combines manual and automatic transmissions, allowing the driver to choose between manual or automatic mode. In manual mode, since there is no clutch, it functions similarly to an AMT transmission, but the highest gear in manual mode is the 8th gear, while in automatic mode, it operates like an AT transmission.
12
4
Share

What is the formula for converting engine net power to horsepower?

Engine net power conversion to horsepower formula is 1 metric horsepower = 75 kilogram-force·meter/second = 735 watts. The following is relevant information about engines: 1. Concept: An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines usually convert chemical energy into mechanical energy. 2. Classification: Internal combustion engines, external combustion engines (meaning fuel burns outside the engine), gas turbines, jet engines.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.