···
Log in / Register

Does calling 110 for vehicle removal have any impact?

4 Answers
EmilyLynn
07/29/25 2:08pm
Car owners can call 110 for vehicle removal. Generally, 110 will transfer the call to a dedicated vehicle removal hotline, which will handle the removal process. If your car is blocked in a parking lot or on the roadside, don't rush to call for help immediately. First, check the driver's seat and front windshield area of the other vehicle to see if the owner has left any contact information. If a phone number is provided, you can call the owner directly. Calling 114 for vehicle removal: When calling 114 for vehicle removal, provide the other vehicle's license plate number to the operator. The operator will then locate the owner's phone number and notify the owner. However, this service is only available if the owner has previously registered their phone number with 114. If the owner hasn't registered, 114 won't be able to retrieve their information. Contacting through the insurance company: There is usually an insurance sticker on the top right corner of the car, which includes the insurance company's phone number. You can call the insurance company, provide the other vehicle's license plate number, and the insurance company will use this information to locate and contact the owner.
Was this review help?
1
0
Share
DelJoanna
08/13/25 6:05am
As someone who frequently studies traffic regulations, I believe calling 110 for vehicle removal definitely has negative consequences. 110 is a dedicated emergency hotline for situations like traffic accidents with injuries or crime scenes. If you call them just because your car is blocked, the arriving officers may criticize or educate you upon finding it's not a serious matter, or it might even affect your personal credibility record. Worse, this wastes precious resources and delays real emergencies like fires or medical crises. My advice: First try locating the car owner—check the phone number card on the windshield or ask nearby security guards. If no leads, dial 122 for traffic management issues. Develop good parking habits to avoid blocking others. Remember: Don't panic-call police for minor issues. More rationality means fewer troubles and social responsibility—limited resources work best when used properly.
Was this review help?
9
3
Share
Expand All
DeMaverick
10/10/25 7:21am
I always think from a safety perspective: Calling 110 for car removal certainly has drawbacks. 110 is designed for life-or-death emergencies, such as when a vehicle blocks an ambulance route or someone is trapped. Otherwise, calling indiscriminately may label you as a troublemaker, with consequences including wasted police resources from unnecessary trips and delayed responses during real emergencies, posing greater risks. My advice is not to act impulsively—first assess the situation. If there's no immediate danger, patiently seek alternative solutions: use a car removal app, contact the property management, or ask friends for help. Experience shows most parking issues can be resolved quickly without police involvement. Cultivate good habits: always leave enough space when parking—mutual assistance is the most practical approach.
Was this review help?
1
1
Share
Expand All
CaliAnn
11/23/25 8:33am
As an ordinary car owner, I've personally experienced a similar situation. That time my car was blocked in the community, and I initially thought about calling 110, but people in the neighborhood group helped locate the owner. If I had actually called 110, the consequences would have been significant: police arriving to document the incident, possibly lecturing me about misusing emergency services and wasting their time on other cases; plus the personal embarrassment and unnecessary record. Fortunately, I didn't call, avoiding unnecessary trouble. Later I became wiser: leaving contact information in the car to make it easier for others to reach me. Reporting minor issues to the police isn't worth it—it wastes resources and adds social burden. Let's all stay calm and make our communities more harmonious.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

Where is Jetour Cars Produced?

Jetour cars are manufactured at the Chery Intelligent Manufacturing Base in Kaifeng, Henan. Here is some information about Jetour cars: 1. Jetour is a car product series launched by Chery Holding Group on January 22, 2018. All Jetour models are SUVs. The models under Jetour include X70, X70S, X90, X95, etc. 2. Jetour SUVs offer relatively high cost performance, making them suitable for young people who have just started working and do not have much money. SUVs are also favored by many consumers due to their spacious interiors, excellent driving visibility, and high ground clearance for better off-road capability. SUVs are versatile, offering great comfort, large trunk space, and the ability to carry a lot of cargo. Because of their high ground clearance, many people who enjoy self-driving tours prefer SUVs for their better off-road performance. 3. There are also many 7-seater SUV models on the market, which add a third row of seats, allowing the vehicle to accommodate seven people at the same time.
6
5
Share

What Causes Unstable Idling in a New Car?

New car unstable idling reasons are as follows: Air filter: If the air filter is not replaced in time, it will cause insufficient air intake and reduce engine idle speed. Abnormal water temperature: High engine water temperature will cause early ignition timing, change the air-fuel mixture ratio, and thin the engine oil viscosity (poor lubrication). Causes of abnormal water temperature include: insufficient coolant, thermostat not opening, fan failure, and inaccurate temperature control switch. Excessive carbon buildup in throttle body and air flow meter: The throttle body and air flow meter are prone to dirt. Most modern cars use electronic throttle bodies, and even slight carbon buildup can affect them. Excessive carbon buildup in the throttle body can cause throttle sticking, severe power loss, and unstable idling. Clogged fuel injectors: Clogged fuel injectors will result in inconsistent fuel injection amounts, causing uneven cylinder operation and leading to unstable ignition and idling.
18
2
Share

How to Disassemble the LaCrosse Radiator?

Disassembling the LaCrosse radiator requires eight steps, as follows: 1. Remove the wiring harness clip inside the upper crossbeam of the radiator and move the wiring harness aside. 2. Remove the air filter assembly and move the control computer aside. 3. Remove the right headlight. 4. Remove the fan frame assembly. 5. Unscrew the drain bolt at the bottom of the radiator and collect the coolant. 6. Remove the upper and lower hoses. 7. Remove the radiator's mounting bolts. 8. Remove the radiator at a certain angle. The LaCrosse was introduced to replace the Regal and secure a significant position in the domestic mid-to-high-end car market. It integrates General Motors' globally synchronized advanced platform, superior resources from both domestic and international markets, and independent research and development. Equipped with cutting-edge leading powertrains and top-tier safety technology, it delivers an exhilarating driving experience. Luxurious features and meticulous craftsmanship provide an ultimate, comfortable, and opulent riding experience.
2
5
Share

What type of vehicle is the VV5?

VV5 is a compact SUV. Here are the relevant details about the VV5: 1. The dimensions of the VV5 are: length 4462mm, width 1857mm, height 1638mm, with a wheelbase of 2680mm, a fuel tank capacity of 55 liters, and a curb weight of 1579kg. 2. The WEY VV5 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 171PS, a maximum power of 126kW, and a maximum torque of 287Nm, paired with a 7-speed dual-clutch transmission. 3. The VV5 is a model under the WEY brand. Other WEY models include: WEY VV7, WEY VV6, WEY VV7 GT, WEY P8, WEY VV7 New Energy, etc.
19
3
Share

How to reset the wrench light on Bestune X40?

Bestune X40 wrench light can be cleared by following these steps: 1. Turn off the ignition switch; 2. Press and hold both arrow buttons simultaneously, then turn on the ignition switch; 3. After approximately 3 seconds with the ignition on, release both arrow buttons; 4. The maintenance menu will appear on the display, asking whether to reset the maintenance reminder; 5. Press and hold the SET (reset) button for more than 3 seconds; 6. Press the MODE button; 7. Turn off the ignition switch and restart the vehicle to complete the maintenance light reset. Here is relevant information about the wrench light: 1. The wrench symbol on the dashboard is the vehicle's maintenance reminder light. If illuminated, it indicates that the vehicle requires maintenance. Regular maintenance can improve vehicle performance and extend its service life. 2. According to relevant vehicle maintenance test programs, proper maintenance can save 11.36% of fuel during driving; after complete maintenance, CO emissions during idle driving are reduced by 45.37%.
16
1
Share

Will tightening the valve stem press against the valve core?

Tightening the valve stem can press against the valve core, but the tire won't leak air even if the valve core cap is missing, because the valve stem is what actually functions. As long as the valve stem isn't damaged, there will be no air leakage. Types of valve stems: The Schrader valve (American-style) is the most widely used type of valve stem, commonly found in cars, motorcycles, bicycles, and other vehicles. The Presta valve (French-style) is typically used on bicycles, especially road bikes, along with other special types of valve stems. Functions of valve stems: The valve stem functions as a small component for inflating and deflating tires, maintaining the seal after inflation. A standard valve stem consists of three main parts: the valve stem body, the valve core, and the valve stem cap.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.