Does C1 demerit points affect upgrading to B2 license?

1 Answers
DeMadeline
07/29/25 6:26pm
C1 demerit points below 12 have no impact on upgrading to a B2 license. However, if the annual demerit points reach 12, upgrading to a B2 license is not permitted. Below are the relevant requirements for applying for different vehicle-type licenses: 1. Medium-sized bus driving category: To apply for upgrading to a medium-sized bus driving category, the applicant must have held a city bus, large truck, small car, small automatic transmission car, low-speed truck, or three-wheeled vehicle driving license for at least three years, with no record of accumulating 12 demerit points in the last three consecutive scoring cycles before application; 2. Tractor driving category: To apply for upgrading to a tractor driving category, the applicant must have held a medium-sized bus or large truck driving license for at least three years, or a large bus driving license for at least one year, with no record of accumulating 12 demerit points in the last three consecutive scoring cycles before application.
Was this review help?
17
2
Share
More Forum Discussions

Is it normal for the production dates of new car glass to be different?

It is normal for the production dates of new car glass to be different. Car glass is produced on assembly lines, and different batches of glass will have different production dates. Car glass is imprinted with letters, numbers, and patterns, representing the car manufacturer, glass brand, production date, and China's 3C mandatory certification mark. The functions of car glass are: 1. To shield from wind and rain, and to provide sound insulation and noise reduction; 2. To reduce wind resistance and guide airflow; 3. To protect the safety of passengers. The maintenance methods for car glass are: 1. Use dedicated or suitable wiper blades and replace them promptly; 2. Keep the windshield clean; 3. Use automotive-specific glass cleaner.
6
4
Share

Where is the air conditioning filter of Citroen c3-xr located?

The air conditioning filter of Citroen c3-xr is located in the central channel next to the left foot of the front passenger seat. Use tools to remove the bolts and take off the cover plate to see the air conditioning filter. Taking the 2020 Citroen c3-xr as an example, it belongs to a small SUV, with body dimensions of: length 4282mm, width 1748mm, height 1557mm, wheelbase of 2655mm, fuel tank capacity of 53l, and curb weight of 1220kg. The 2020 Citroen c3-xr has a front suspension of MacPherson independent suspension and a rear suspension of torsion beam non-independent suspension. It is equipped with a 1.2l turbocharged engine, with a maximum horsepower of 136ps, maximum power of 100kw, maximum torque of 230nm, and matched with a 6-speed dual-clutch transmission.
16
3
Share

How to solve the yellow light issue on the Nissan Sylphy key?

The solution for the yellow light on the Nissan Sylphy key is to replace the key battery. If the warning persists, it is recommended to visit a local 4S dealership for inspection and repair. Taking the 2021 Nissan Sylphy as an example, it is a compact car with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a curb weight of 1188kg. The 2021 Nissan Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, a maximum torque of 155Nm, and a maximum power output of 90kW, paired with a 5-speed manual transmission.
5
2
Share

What is the recommended speed for breaking in a new car?

The recommended speed for breaking in a new car is between 50 to 90 kilometers per hour. Precautions during the break-in period include: 1. Warm up the engine before starting; 2. Avoid emergency braking; 3. Prevent overloading; 4. Avoid long-distance driving; 5. Do not drive at high speeds; 6. Use high-quality gasoline; 7. Do not remove the speed limiter prematurely; 8. Shift gears in a timely manner; 9. Properly adjust the ignition and fuel supply systems. Methods for the break-in period are: 1. Preheat the cold engine—proper warming up ensures better lubrication of engine oil inside the engine, reducing wear; 2. Shift gears promptly while driving, especially for manual transmission cars—reasonable gear shifting during the break-in period avoids high gear with low RPM or low gear with high RPM; 3. Perform timely maintenance on the new car during the break-in period.
20
1
Share

How to Turn On the High and Low Beams of the Sylphy?

The method to turn on the high and low beams of the Sylphy is as follows: 1. Move the light control lever on the left side of the steering wheel to the far left position and rotate it forward; 2. Rotating it once turns on the auto mode, another rotation activates the parking lights, and one more rotation turns on the low beams; 3. Push the entire light control lever forward to activate the high beams. Taking the 2021 Sylphy as an example, its body dimensions are: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, fuel tank capacity 50L, and curb weight 1188kg. The 2021 Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, maximum torque of 155Nm, and maximum power of 90kW, paired with a 5-speed manual transmission.
5
3
Share

How often should spark plugs be replaced in a new car?

The replacement interval for spark plugs in a new car depends on the material of the spark plugs: 1. Nickel alloy spark plugs should be replaced every 20,000 kilometers; 2. Iridium spark plugs should be replaced every 60,000 kilometers; 3. Platinum spark plugs should be replaced every 100,000 kilometers. The working principle of spark plugs is: under the control of the engine, the high-voltage electricity generated by the ignition coil is introduced into the engine cylinder, and a spark is generated between the gaps of the spark plug electrodes to ignite the mixed gas, ensuring the normal operation of the engine. The method for removing spark plugs: 1. Clean the dust and impurities around the spark plugs using compressed air or a soft tube to blow them away; 2. Ensure the engine is in a cold state before proceeding; 3. Protect the spark plug installation port immediately after removal to prevent impurities or dust from entering the cylinder; 4. Be careful not to damage the insulating porcelain body when using a wrench; 5. Do not bend or strike the center electrode when adjusting the spark plug gap.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.