Does BMW Clock Spring Replacement Require Matching?

Can ETC be changed to a different license plate number?

ETC license plate number change method: The vehicle owner must bring their ID card and a copy, vehicle registration certificate and a copy, the ETC device, and the bank card used to bind the ETC to the bank for processing. After verifying the documents, the bank staff will cancel the ETC binding to the original license plate information and rebind it to the new license plate number. The bank staff will install the ETC in the vehicle and activate it on-site for normal use. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. ETC activation method: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting and removing the card twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, press the button on the top of the electronic tag directly to enable Bluetooth. Turn on the phone’s Bluetooth and open the corresponding mobile app (usually a QR code for download is provided on the electronic tag). Enter the device activation interface. Click "Device Connection" and wait patiently for the "Connection Successful" prompt. After successful connection, upload a photo of the vehicle’s front to complete activation.

6

5

Share

How to Remove the Automatic Gear Shift Lever of Buick Excelle?

First, pry open the old shift lever cover and push it upwards to expose the connecting rod of the shift lever head. After exposing the connecting rod of the shift lever head, you will find a clip underneath. Use needle-nose pliers to apply downward force to loosen the clip. Then, pull the shift knob upwards forcefully. Once the knob is removed, the shift lever operating rod will be exposed.

2

3

Share

How to Repair a Water-Damaged Engine?

The simplest method is to check if the engine oil color shows any abnormalities. Inspect the air filter and the lower housing of the air filter one by one for any obvious signs of water ingress. Remove the spark plugs from each cylinder and check if they are damp. When water enters the engine, since water is difficult to compress, the piston cannot reach its original top dead center position, resulting in a noticeable downward shift in the top dead center position.

10

2

Share

What to Do If You Forget to Bring Your Driver's License When Stopped by Police?

Save a photo of your driver's license in your phone, including both the main page and the supplementary page. When stopped by traffic police, explain that you have a driver's license but didn't bring it with you. State that you possess a driver's license and can provide photos for verification. Note that the photos must be clear. Traffic police can verify whether the vehicle owner has obtained a driver's license and check its current status by using the ID card number, thereby confirming license possession. If you didn't bring your driver's license, you may also avoid penalties by presenting your vehicle registration certificate first.

5

3

Share

How to Connect Volvo S90 to CarPlay?

Open the Settings on your phone. On the Settings page, tap General. Tap CarPlay, a pop-up will prompt that Bluetooth is off, select USB Only. Finally, connect your phone to the car's USB port using an Apple data cable.

12

0

Share

Is a tire pressure of 260 normal?

Whether a tire pressure of 260 is normal depends on different situations: 1. If the tire pressure is 260kpa when the car is hot, it is normal; 2. If the tire pressure is 260kpa when the car is cold, it is slightly high. The hazards of excessive tire pressure are: 1. The friction and adhesion of the tire will decrease, affecting braking performance; 2. It can cause steering wheel vibration and deviation, reducing driving comfort; 3. It accelerates localized wear on the central tread pattern of the tire; 4. It causes excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body and increasing the load on the car while driving; 5. It decreases the tire's resistance to punctures.

3

Share

Does BMW Clock Spring Replacement Require Matching?

Can ETC be changed to a different license plate number?

How to Remove the Automatic Gear Shift Lever of Buick Excelle?

How to Repair a Water-Damaged Engine?

What to Do If You Forget to Bring Your Driver's License When Stopped by Police?

How to Connect Volvo S90 to CarPlay?

Is a tire pressure of 260 normal?

Is it necessary for the owner to be present for the annual vehicle inspection?

How long after expiration can a small car driver's license still be renewed?

What is the process for a driver's license renewal medical examination at the hospital?

Will traffic police check 72v electric motorcycles?