Does blackening car rims require registration?

1 Answers
JosephLee
07/30/25 4:46am
Under the premise that the size of the car rims remains unchanged, blackening the rims does not require registration. The following is a detailed introduction about car rims: 1. Overview: The rim (Car-Rim) is the part at the center of the wheel where the axle is installed, also known as the 'wheel rim' or 'steel rim'. Rims are prone to accumulating dirt, and if not cleaned for a long time, they may corrode and deform, posing safety hazards. 2. Others: Car rims are an important component of automotive parts. With the growth of China's automotive parts industry, the rim industry has gradually expanded. Rims on the market can be divided into steel rims and alloy rims based on material, each with its own advantages and disadvantages.
Was this review help?
18
4
Share
More Forum Discussions

How many cylinders does the Senova X35 engine have?

The Senova X35 is equipped with a 4-cylinder engine. This model features a 1.5-liter naturally aspirated engine with a maximum power output of 116 horsepower and a peak torque of 148 Newton-meters. The powertrain is paired with either a 5-speed manual transmission or a 4-speed automatic transmission. The automatic transmission in the Senova X35 is sourced from Aisin and also includes manual, sport, and snow modes. The Senova X35 adopts a simple yet distinctive design style, featuring a floating LCD display that adds a premium touch, while the circular air vents complement the refined aesthetic the X35 aims to achieve.
19
2
Share

What does flooring the accelerator from a standstill mean?

Flooring the accelerator from a standstill means pressing the accelerator pedal all the way down when starting the car. This practice is highly detrimental to the vehicle and is not recommended for drivers. When the engine is first started, its temperature is not very high, and it hasn't fully reached its normal operating temperature. If the accelerator pedal is pressed to the floor at this point, the engine speed will rapidly increase, which can lead to increased engine wear. Flooring the accelerator from a standstill is often seen in car racing events, such as drag races where drivers might use launch control or floor the accelerator to start. This method can easily cause the drive wheels to lose traction, potentially leading to a loss of vehicle control.
10
3
Share

How Often Should the Original Spark Plugs of the Tenth-Generation Civic Be Replaced?

The replacement interval for the original spark plugs of the tenth-generation Civic mainly depends on the mileage. It is recommended to replace the spark plugs once every 40,000 to 60,000 kilometers. Spark plugs are a crucial component of the gasoline engine's ignition system. They introduce high-voltage electricity into the combustion chamber and generate sparks by jumping the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, and remove the high-voltage wires. Mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the removed high-voltage wires according to the firing order and secure the cover.
17
5
Share

How to operate the one-touch window lowering for the 10th-generation Civic?

The one-touch window lowering for the 10th-generation Civic can be achieved by long-pressing the unlock button on the car key. If you need to raise the windows, simply long-press the lock button on the car key. The car windows come with various functions, including remote window control, anti-pinch protection, and heating for defogging. The anti-pinch protection is a safety feature that automatically stops the window if it encounters resistance during movement, effectively protecting the safety of passengers. The heating for defogging function is useful during rainy or snowy weather when fog on the windows obstructs the driver's view. By pressing the defogging button, the electric heating elements inside the window are activated, reducing the temperature difference between the inside and outside of the glass to eliminate fog.
15
0
Share

How to Use the Air Conditioning in the Tenth-Generation Civic?

The method to use the air conditioning in the tenth-generation Civic is as follows: 1. Rotate the AUTO knob left or right to adjust the air conditioning temperature; 2. The ON/OFF button controls the air conditioning switch, where ON turns it on and OFF turns it off; 3. The SYNC label indicates dual-zone air conditioning, which controls the air conditioning and temperature settings for both the driver and passenger seats, and the temperature can be adjusted using the knob. The tenth-generation Civic is a compact sedan under Dongfeng Honda, with dimensions of 4649mm in length, 1800mm in width, and 1416mm in height, and a wheelbase of 2700mm. The front face design incorporates new elements for a more sporty style, with smooth and dynamic body lines. The dual C-shaped taillight design gives the rear a more compact appearance, with an overall layout that is well-organized and full of layers.
8
3
Share

Where is the ETC installed on the car?

The installation position of the ETC for small cars is generally in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with anti-explosion film or those that have been retrofitted with anti-explosion film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave sunroof strip. ETC is the abbreviation of Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, the owner needs to provide the original and photocopy of their valid ID card and vehicle registration certificate. If the application is not made by the owner themselves, the agent's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection seal. Additionally, a bank card for deducting highway tolls is needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. Here are the precautions for installing ETC: Do not obstruct the view. It is best to install it behind the rearview mirror: Many car models have a large inclination angle for the windshield, which can reduce the driver's field of vision. If this is not considered when installing the ETC, it will increase the driver's blind spot. Installing it behind the right side of the rearview mirror can avoid obstructing the view. Do not affect charging: The ETC electronic tag consumes power, but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, when installing, avoid the black areas on the windshield and do not install it in a position where the solar panel is easily blocked. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever, connected to a switch below. After the electronic tag is installed, the windshield will press the anti-removal lever in. If it is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and making it unusable. You will then need to go to an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing area is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the toll of the vehicle in front. The recognition speed for ETC lanes is 20 kilometers per hour. If the speed is too fast, the vehicle device information cannot be read, leading to toll deduction failure. When using a debit card to bind ETC, insufficient balance will also cause toll deduction failure.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.