Does Bentley Have Sports Cars?

Where is the crankshaft position sensor located on the Nissan Qashqai?

The crankshaft sensor of the Nissan Qashqai is located at the junction between the transmission and the engine. The crankshaft sensor is one of the most important sensors in the engine's electronic control system, providing signals for ignition timing and confirming crankshaft position, used to detect piston top dead center, crankshaft angle, and engine speed. Below are the detection methods for the crankshaft position sensor: 1. Resistance detection of the crankshaft position sensor: Unplug its wiring connector and use a multimeter to measure the resistance between each terminal of the sensor. The readings should comply with the specifications in the attached table; otherwise, replacement is required. 2. Output signal detection of the crankshaft position sensor: Unplug the wiring connector of the crankshaft position sensor. When the engine is turned, there should be pulse signal outputs between the G1-, G2-, and G- terminals. If there is no pulse signal output, replacement is necessary. 3. Gap detection between the sensor coil and the signal rotor: Use a feeler gauge to check the air gap between the signal rotor and the protrusion of the sensor coil. The gap should be 0.2~0.4mm. If the gap does not meet the requirements, replacement is needed.

11

4

Share

Where is Exeed Cars Produced?

Exeed is a premium brand launched by Chery, positioned as a mid-size SUV, with its production plant located in Wuhu. Below is an introduction to Chery Exeed: 1. Configuration: Front seat heating, color-changing ambient lighting, keyless entry/start, AVM panoramic imaging system, BSW blind spot monitoring system, FRS facial recognition system, etc., are all standard features. 2. Power: The Exeed TXL/TX is equipped with a 1.6TGDI engine, delivering a maximum power of 145KW and a maximum torque of 290Nm, meeting the China VI emission standards, paired with a Getrag 7-speed wet dual-clutch transmission.

11

1

Share

What are the differences between the VV7 and VV7 GT?

The differences between the VV7 and VV7 GT are mainly reflected in the following aspects: 1. Side profile. The VV7 GT adopts a dual-sided quad-exit circular exhaust pipe design, while the VV7 features a dual-sided quad-exit square chrome-plated exhaust pipe design. 2. Rear section. The VV7 GT has a fastback-style rear design, whereas the VV7 has a more layered rear styling. Additional information: 1. Body dimensions. The VV7 measures 4774*1931*1672mm in length, width, and height, with a wheelbase of 2950mm. 2. Powertrain. The VV7 offers one powertrain option, equipped with a 2.0T turbocharged engine that delivers a maximum power of 167kW and a peak torque of 387Nm.

4

3

Share

Is Tesla Fully Autonomous?

Autonomous driving is the soul configuration of Tesla, but Tesla has not achieved full autonomous driving. The autonomous driving system it is equipped with is more accurately described as a driving assistance system. The SAE standard divides autonomous driving technology into six levels from 0 to 5. Tesla's Autopilot assistance technology belongs to Level 2, which can control the vehicle's speed, achieve automatic steering and lane changing, but still requires the driver to pay attention at all times and take back driving control when necessary. Here is some related information about Tesla's autonomous driving: 1. FSD (Full Self-Driving) is an optional function introduced by Tesla, which is more advanced than the currently installed Autopilot function. It can achieve automatic parking, automatic lane changing, recognizing traffic lights and reacting automatically, and smart summon in parking lots. 2. Although autonomous driving is available for Tesla in China, it is only suitable for use on highways with good road conditions and cannot be completely relied upon. Drivers need to always pay attention to stationary objects on the road.

15

2

Share

What is the emission standard of the 2017 Corolla?

2017 Corolla meets China National V emission standard. Here is some information about China National V emission standard: China National V emission standard, referred to as "China V standard", has an emission control level equivalent to the European Euro 5 emission standard currently in implementation. Additional information: 1. Exterior design. The new car deeply integrates Toyota's latest family design language, featuring sharp and futuristic front headlights, a large-sized blackened grille on the front bumper, and more dynamic and lively body lines and roof contours compared to the current model. 2. Interior design. The new generation Corolla from FAW Toyota maintains the same overall design as the overseas version, with a simple, stylish, and sporty theme. The lines on the dashboard and door panels are smooth and crisp, offering a visually pleasing effect. 3. Powertrain. It offers two powertrain versions: 1.2T and 1.8L hybrid. The 1.2T engine is carried over from the current Corolla, with a maximum power of 85kW (116PS) and peak torque of 185N·m, paired with an S-CVT continuously variable transmission or a 6-speed manual transmission. The hybrid version is equipped with a 1.8L Atkinson cycle engine + electric motor + E-CVT transmission + nickel-metal hydride battery powertrain, with a combined maximum power of 90kW (122PS).

14

2

Share

Why does the engine still make noise after the Tiguan is turned off?

When the Tiguan is turned off and the engine is still making noise, it is actually the sound of the fan. The Tiguan is equipped with a turbocharged engine, and for turbocharged vehicles, the fan continues to operate for cooling after the engine is turned off, which is a normal phenomenon. Below is relevant information about turbocharged engines: 1. When using a turbocharged engine model, it is important to note that after parking, do not turn off the engine immediately. While the engine is running, some of the oil is supplied to lubricate the turbocharger rotor bearings and for cooling. If the engine is suddenly turned off while running, the oil pressure rapidly drops to zero, and the high temperature from the turbocharger turbine section transfers to the middle, preventing the heat in the bearing support housing from being quickly dissipated. Meanwhile, the turbocharger rotor continues to spin at high speed due to inertia. Therefore, suddenly turning off the engine while it is hot can cause the retained oil in the turbocharger to overheat and damage the bearings. 2. After the engine has been running under heavy load for an extended period, it should idle for 3-5 minutes before being turned off to allow the turbocharger rotor speed to decrease, especially avoiding sudden shutdown after revving the engine. After starting the engine, especially in winter, it should idle for a while to ensure the bearings are fully lubricated before the turbocharger rotor reaches high speed.

16

1

Share

Does Bentley Have Sports Cars?

Where is the crankshaft position sensor located on the Nissan Qashqai?

Where is Exeed Cars Produced?

What are the differences between the VV7 and VV7 GT?

Is Tesla Fully Autonomous?

What is the emission standard of the 2017 Corolla?

Why does the engine still make noise after the Tiguan is turned off?

What are the color options for the Mazda CX-4?

Can the Mercedes-Benz smart be driven on highways?

Which country is Porsche from?

Does the Buick Excelle have a reverse radar?