Does BAIC Senova Use Aisin Transmission?

1 Answers
SanJackson
07/30/25 3:41am
BAIC Senova uses an Aisin transmission, which is a 4-speed automatic transmission. Compared to 5-speed and 6-speed automatic transmissions, the 4-speed automatic transmission has fewer gears, but it offers relatively smooth gear shifts with clear shifting logic, which improves fuel economy to a certain extent. BAIC Senova is a sedan under the BAIC brand, with dimensions of 4861mm in length, 1820mm in width, and 1462mm in height, and a wheelbase of 2755mm. The BAIC Senova is equipped with a 1.8T turbocharged engine, delivering a maximum horsepower of 177 and a maximum power output of 130 kilowatts.
Was this review help?
1
3
Share
More Forum Discussions

How to Deal with Overfilled Coolant?

If the coolant is overfilled, you can directly use a syringe to extract the excess coolant until the liquid level is below the maximum mark. Failure to address this promptly may result in the excess coolant overflowing from the pressure relief valve during prolonged high-temperature operation of the vehicle. Coolant must be replaced every two years because its effective period is two years. Expired coolant can cause cylinder corrosion, and in severe cases, it may even cause serious damage to the engine. When adding coolant, open the radiator cap appropriately and ensure the radiator is in a cooled state. Pay attention to check for any impurities in the coolant, and the final liquid level should be maintained between the MAX and MIN marks. After completion, tighten the radiator cap securely.
4
2
Share

What maintenance should be done after a car has run 50,000 kilometers?

What maintenance should be done after a car has run 50,000 kilometers depends on the condition of the vehicle. When considering maintenance items, you can refer to the car's user manual for guidance, but many people also adjust the maintenance schedule based on the car's usage. If the car is in good condition, maintenance can be delayed until 60,000-70,000 kilometers. The following are the benefits of car maintenance: 1. Ensures the vehicle maintains excellent performance. 2. Improves vehicle efficiency and reduces wear on parts and tires. 3. Enhances driving safety. 4. Prevents potential hazards caused by vehicle issues. 5. Reduces noise and environmental pollution. 6. Keeps the vehicle's exterior clean and prevents damage.
15
2
Share

How to Choose LED Headlights for Cars?

Factors affecting LED car lights include brightness, light pattern, color temperature, and heat dissipation. Brightness is determined by the LED chips, where high-quality chips ensure good light efficiency. The higher the lumen output of the chips, the better the brightness. Therefore, the quality and brand of the chips are crucial. Some well-recognized brands in the market include Philips and Cree. Below is an introduction to car headlights: Car headlights, also known as front headlights, are lighting fixtures installed symmetrically on both sides of the front end of a vehicle to illuminate the road ahead during nighttime driving. LED (Light Emitting Diode) is an electroluminescent device that uses solid-state semiconductor chips as the light-emitting material. It emits light directly through photon emission caused by carrier recombination. LED headlights are lighting devices manufactured using LEDs as the light source.
3
1
Share

What does it mean when the low-pressure run-flat indicator is activated?

The activation of the low-pressure run-flat indicator indicates that the air pressure in at least one tire differs from the pressure recorded during the last tire reset, and it is necessary to check the tire pressure of the vehicle. Below are the methods for resetting the low-pressure run-flat indicator: 1. Adjust the tire pressure: When the tire pressure is insufficient, the dashboard will prompt to reactivate the low-pressure run-flat indicator. Adjusting the tire pressure can reset the low-pressure run-flat indicator. 2. If adjusting the tire pressure does not reset the low-pressure run-flat indicator: Press the right arrow button on the steering wheel to navigate to the maintenance menu, then press the down button to reset the tire pressure light.
6
3
Share

What is the purpose of the AOFF switch in the Buick Excelle?

AOFF button stands for the Auto Start-Stop function. The Auto Start-Stop system automatically shuts off the engine when the vehicle comes to a temporary stop (such as at a red light) during driving. When it's time to move again, the system automatically restarts the engine. Additional information: Main types of engine start-stop technology: 1. Separate starter motor: This type of start-stop system uses independently designed starter and generator. The starter provides the power needed for engine startup, while the generator supplies electrical power to the starter. 2. Integrated starter-generator: The integrated starter/generator is a synchronous motor excited by permanent magnet inner rotor and single-tooth stator, which can integrate the drive unit into the hybrid powertrain system.
16
0
Share

Is Driving at 70 km/h in 4th Gear Harmful to the Car?

Driving at 70 km/h in 4th gear is not harmful to the car. Here is some relevant information about car gears: 1. Speed range: 1st gear corresponds to 0-5 km/h, 2nd gear to 5-20 km/h, 3rd gear to 20-40 km/h, 4th gear to 40-60 km/h, and 5th gear to 60-100 km/h. 2. Shifting timing: Generally, the shifting point for most cars is when the engine reaches 2000 r/min, and should not exceed 2500 r/min. For some high-displacement, high-power engines, shifting can be done around 3000 r/min.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.