Does an Automatic Transmission Need Its Filter Replaced?

1 Answers
XavierLee
07/25/25 4:57pm
Transmission filters are generally replaced along with the transmission fluid, typically every two years or approximately every 40,000-60,000 kilometers driven. Below is an introduction to transmission filters: 1. A transmission filter, also known as a transmission filter element, is installed inside the transmission and serves a filtering function. It filters out contaminants and impurities from the transmission fluid, thereby protecting the transmission. 2. Most filter elements are made of filter paper material, which can accumulate a significant amount of impurities over prolonged use and thus require timely replacement. Some vehicle models, however, use metal mesh filters with fine wire mesh as the filtering layer. These can be removed, cleaned during transmission fluid changes, and reused without needing replacement. 3. Over time, friction between metal components in the transmission generates fine particles, and the transmission fluid can also become contaminated. These impurities are easily intercepted and filtered by the transmission filter, preventing transmission malfunctions. However, as time passes, the accumulation of impurities increases, gradually clogging the transmission filter and reducing its filtering efficiency. This allows impurities to adhere to other components within the transmission, accelerating wear and significantly shortening the transmission's lifespan. Therefore, it is important to regularly inspect the condition of the filter and replace it when necessary.
Was this review help?
15
4
Share
More Forum Discussions

What is the reason why the rearview mirror of a Mercedes-Benz suddenly cannot automatically fold?

Mercedes-Benz rearview mirror not automatically folding may be due to the battery being disconnected or dead. After setting "fold the rearview mirror when locking the car" and manually folding it, this can cause the automatic folding function to fail. Simply re-adjust it. Related introduction: 1. Folding rearview mirror: The rearview mirror folding function refers to the ability of the car's side rearview mirrors to fold and retract when necessary. 2. Usage scenarios: When passing through narrow sections or entering automatic parking lots, electric folding rearview mirrors are required. 3. Classification of folding rearview mirrors: divided into manual and electric types.
5
2
Share

Where to adjust the active braking of the Tayron?

The active braking of the Tayron is adjusted in the central control display. Active braking refers to a technology where the vehicle can autonomously generate braking effects to decelerate the vehicle when encountering sudden hazards during normal driving (without adaptive cruise control), thereby improving driving safety. Taking the 2019 Tayron as an example, it belongs to the mid-size SUV category with the following dimensions: length 4589mm, width 1860mm, height 1660mm, wheelbase 2731mm, front track 1576mm, rear track 1575mm, fuel tank capacity 60l, and luggage compartment capacity 506l.
1
0
Share

Why are bumpers made of plastic instead of metal?

Reasons why bumpers are not made of metal: The reasons for using plastic materials include reducing vehicle weight, improving impact buffering during collisions, increasing the utilization rate of vulnerable parts, and lowering production process requirements to reduce costs. Reducing vehicle weight: Under the same volume conditions, plastic materials weigh significantly less than common metals. Using plastic for front and rear bumpers can appropriately reduce the vehicle's weight, achieving certain effects in lowering fuel consumption and improving braking efficiency. Improving impact buffering during collisions: Due to the stronger plasticity of plastic compared to metal, when a vehicle is subjected to external impact forces, plastic bumpers can absorb part of the impact through their own deformation and tearing, resulting in better energy absorption effects. This reduces vehicle damage and enhances the safety factor for occupants. Increasing the utilization rate of vulnerable parts: The front and rear bumpers of a vehicle are among the exterior components most prone to scratches. Since plastic has much stronger plasticity than metal and can automatically recover from minor contact collisions, it improves the utilization rate of these vulnerable parts. Lowering production process requirements and costs: Due to the stronger plasticity of plastic compared to metal, it can be appropriately folded and twisted, making the vehicle production and assembly process more convenient and efficient. Moreover, plastic materials can be installed and fixed using clips. If metal materials were fixed in the same way, it could pose a risk of detachment during high-speed driving. Therefore, using plastic materials not only reduces material costs but also lowers labor and process costs.
15
0
Share

What are the reasons why the trunk lid of the BMW 730 cannot be opened?

The trunk lid of the BMW 730 cannot be opened due to: issues with the trunk hydraulic system, abnormal working condition of the hydraulic pump, damage to the trunk latch causing it to get stuck and not open, or abnormal working conditions of the SCA automatic soft-close device and electric release interlock device. Related information: 1. Composition of the trunk HKL: The HKL consists of components such as the hydraulic pump, motor, and control unit. 2. Electric trunk: Also known as an electric tailgate, it refers to the trunk being opened and closed electrically. To open the trunk, simply press the button inside the car, and the trunk will open automatically. To close the trunk, press the close button inside the trunk or the close button inside the car.
18
0
Share

What does TSI mean on the back of a car?

TSI on the back of a car refers to a turbocharged fuel direct injection engine, which can convert all the energy stored in every drop of fuel into power, resulting in stronger power output. Turbocharging is a technology that uses the exhaust gas generated by the operation of an internal combustion engine to drive an air compressor. Its functions are: 1. Increase the engine's air intake; 2. Improve the engine's power and torque. A fuel direct injection engine can improve the fuel efficiency of an internal combustion engine by twenty percent. Its functions are: 1. Reduce exhaust emissions; 2. Enhance power performance; 3. Reduce engine vibration; 4. Improve the accuracy of fuel injection.
13
5
Share

How to use the hidden dash cam in BMW X3?

It requires the use of a mobile app in conjunction with the dash cam. The BMW hidden dash cam features a compact design that blends seamlessly with the vehicle. The dash cam does not require a battery as it draws power directly from the car, ensuring stable operation and resistance to high temperatures in summer without crashing. Related information: 1. Dash cam: A device that records images, sounds, and other relevant information while the vehicle is in motion. 2. Dash cam components: On the side of the BMW hidden dash cam, there are two physical buttons and three holes, arranged as follows: power button, photo button, microphone, indicator light, and reset hole. The other side houses the memory card slot. The buttons allow you to turn the camera on/off, manually take photos or record videos, and control the microphone.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.