Does a slightly tilted car body count as passing in the reverse parking test of Subject 2?

What are the reasons why the Malibu car door cannot be opened?

The reasons and solutions for the Malibu car door not opening are as follows: 1. The door cannot be opened due to extreme cold in winter. In northern regions, winter temperatures are very low, often below freezing. After washing the car, residual water can accumulate in the door handle, lock, and door frame gaps. The low temperature causes the water to freeze, locking the door and making it impossible to open in the morning. Solution: Pour warm water over the frozen door area to quickly melt the ice. Alternatively, wait until noon when the sun raises the temperature, and the door can then be opened. 2. Rear passengers cannot open the door when getting out, which is usually caused by the child lock. Solution: Simply turn off the child lock function. 3. Remote control failure. Generally, there are several reasons why the remote control cannot open the door: (1) The button response is not sensitive; (2) The battery is low; (3) Environmental factors, such as strong signal interference or shielding; (4) The anti-theft system malfunctions; (5) The remote control needs to be re-matched and encrypted. Solution: If the remote control cannot open the door, don’t panic—you can always use the key to unlock it manually.

14

1

Share

Does Fast Charging Harm New Energy Vehicle Batteries?

There is no harm to the battery. Whether it's fast charging or slow charging, neither has any impact on new energy vehicle batteries. Fast Charging (DC Fast Charging) Fast charging, also known as emergency charging, primarily involves charging stations' charging piles delivering high-voltage direct current directly to the new energy vehicle's power battery through the DC charging port. Fast charging provides charging services within a short period of 20 minutes to 2 hours by supplying a large direct current, typically ranging from 150 to 400A. DC charging piles, commonly referred to as 'fast chargers,' are fixed installations outside new energy vehicles. They use three-phase four-wire AC380V±15% at 50Hz, converting AC to DC through rectification and then adjusting voltage and current output via a DC/DC converter. This setup delivers sufficient power to meet fast charging requirements, as illustrated in Figure 1. Figure 1: DC Charging Pile for Fast Charging (DC Fast Charging) (2) Slow Charging (AC Slow Charging) Slow charging, also known as conventional charging, mainly involves using household power plugs or AC charging piles connected to the AC charging port. The onboard charger then converts 220V AC to 380V DC to charge the power battery. Slow charging typically employs constant voltage or constant current charging with a small current, usually taking 5 to 8 hours, or even 10 to 20 hours. AC charging piles, commonly called 'slow chargers,' only provide power output without charging functionality. They need to be connected to the onboard charger to charge new energy vehicles, essentially acting as a power control device. Due to the generally limited power of onboard chargers, only slow charging is possible. The method of charging via AC charging piles is shown in Figure 2. Figure 2: AC Charging Pile for Slow Charging (AC Slow Charging) (3) Differences Between Fast and Slow Charging Fast charging has the following pros and cons: large charging current, short charging time (30 minutes to 3 hours), suitable for emergency charging; it may reduce the power battery's lifespan, cannot utilize off-peak electricity, and has higher charging costs; charging stations are more expensive.

3

2

Share

How to reset the Polo maintenance reminder?

Here is the method to reset the Polo maintenance light: 1. First, turn off the ignition switch to ensure the vehicle is off. 2. Locate and press and hold the right button (reset/adjustment), which is located on the left side of the dashboard. 3. While holding the right button with your left hand, turn on the ignition switch. 4. Continue holding the "reset/adjustment" button until the maintenance light enters the reset mode, then release the right button (reset/adjustment button). 5. Press the "menu button" within 20 seconds of releasing the right button to confirm the reset. Here is some extended information about the Polo: 1. The body length is 3970mm, width is 1682mm, height is 1462mm, and the wheelbase is 2470mm. 2. The Polo has a relatively heavy body, high safety standards, and a stylish design. The side turn signals use LED, improving driving visibility. 3. The fuel consumption per 100 kilometers ranges between 6.5 liters and 8.8 liters, the fuel tank capacity is 45 liters, and the top speed is 240 km/h. 4. The available engines include turbocharged and naturally aspirated types, and the matched transmissions include dual-clutch, automatic, and manual.

5

3

Share

Where is the VIN located on the imported Ford Edge?

The VIN of the imported Ford Edge is located on the firewall in the engine compartment or under the front passenger seat. Below is additional information about the imported Edge: 1. It is a mid-size SUV with body dimensions of 4878mm in length, 1925mm in width, 1734mm in height, and a wheelbase of 2850mm. 2. It has a fuel tank capacity of 69L and a curb weight of 1850kg. 3. It features a MacPherson strut front suspension and a multi-link rear suspension, powered by a 2.0L turbocharged engine with a maximum horsepower of 245ps, maximum power of 180kw, maximum torque of 390nm, paired with an 8-speed automatic transmission. Below is an introduction to the VIN of the imported Edge: 1. The 1st digit identifies the country/region of origin, indicating the assembly country/region. 2. The 2nd digit identifies the manufacturer of the Ford Edge. 3. The 3rd digit identifies the manufacturer's division or conventional vehicle type. 4. The 4th digit indicates the body series, i.e., the chassis series. 5. The 5th digit indicates the engine type. 6. The 6th to 7th digits indicate the model within this body series. 7. The 8th digit is the occupant safety system code. 8. The 9th digit is the manufacturer's check digit. 9. The 10th digit indicates the vehicle year.

2

5

Share

What are the steps to start driving an Audi A4?

Press the brake with your right foot, push the one-touch start button, press the button on the left side of the gear lever, pull it backward to shift into D gear, release the brake, and step on the accelerator to start. More introduction about Audi A4 is as follows: 1. It is a popular B-class model manufactured by FAW-Volkswagen and launched in April 2003, filling the gap of domestic B-class sedans and consolidating FAW-Volkswagen's leading position in the domestic luxury car market. 2. As the first model to introduce the concept of long wheelbase and turbocharging, from B5 to B8, the sales of A4L have been enduring. The new A4 abandons the teardrop design, adds quattro four-wheel drive mode, has a more fashionable and sporty appearance, and offers more outstanding power and handling. The interior workmanship is exquisite, with rich technological configurations and ample space, making it highly practical among B-class models. 3. It is equipped with Audi's patented quattro all-wheel drive system as standard, providing the vehicle with double the adhesion. This system can automatically, accurately, and timely distribute the grounding force of each wheel when the vehicle is turning or braking on various complex road surfaces, thereby improving the directional stability and traction of the vehicle under complex conditions.

3

2

Share

What Causes a Diesel Vehicle to Emit Blue Smoke?

Diesel vehicle emitting blue smoke can be attributed to the following specific reasons: Incorrect Engine Oil Selection: Manifested as no blue smoke during cold starts in the morning, but a small amount of blue smoke is emitted after the engine warms up. Previously, there was no blue smoke, but after switching to another type of engine oil, blue smoke appears. Acceleration performance is maintained, but engine oil consumption is excessively fast, and engine noise increases. Piston Ring Carbon Buildup: Carbon deposits on the piston rings cause them to lose tension, resulting in poor sealing. Engine oil enters the combustion chamber through the gaps. Power output decreases, cylinder pressure sealing performance declines, and engine oil consumption relatively increases. Aging Valve Stem Seals: Hardened valve stem seals fail to expand and contract with temperature changes, allowing engine oil to enter the combustion chamber during cold starts. A stuck PCV valve allows combustible mixture to enter the crankcase, thinning and degrading the engine oil, which then enters the combustion chamber, accelerating oil consumption. When a diesel vehicle emits blue smoke, it indicates that some engine oil has entered the combustion chamber and burned, while the rest is expelled through the exhaust pipe. This not only wastes engine oil but, more importantly, can lead to damage to vehicle components such as pistons, piston rings, and valves, accelerating wear and potentially causing severe component failure. Therefore, when blue smoke is observed, timely inspection and repair are necessary.

19

5

Share

Does a slightly tilted car body count as passing in the reverse parking test of Subject 2?

What are the reasons why the Malibu car door cannot be opened?

Does Fast Charging Harm New Energy Vehicle Batteries?

How to reset the Polo maintenance reminder?

Where is the VIN located on the imported Ford Edge?

What are the steps to start driving an Audi A4?

What Causes a Diesel Vehicle to Emit Blue Smoke?

What is the aeolusrs car?

How to Fix the Unclosable Sunroof on Baojun 730?

Is there a USB port on the rearview mirror of the Baojun 530?

How to Handle the Steel Ball of the Cruze Check Valve Falling into the Oil Passage?