Does a Six-Seater Business Vehicle Include the Driver?

2 Answers
CalebRose
07/24/25 10:42pm
Yes, it does. Here is a detailed introduction to six-seater business vehicles: 1. Capacity: A six-seater business vehicle can accommodate six people. The number of seats in the vehicle determines the number of passengers it can carry. If the vehicle is overloaded, penalties will be imposed according to the Road Traffic Safety Law. Severe overloading significantly increases the risk of tire blowouts and axle breakage, compromising the vehicle's safety. 2. Business Vehicle: A business vehicle (MPV), or Multi-Purpose Vehicle, combines the functions of a sedan, station wagon, and van. Each seat in the vehicle can be adjusted and configured in various ways. For example, the middle row seatbacks can be folded down to create a table, and the front seats can be rotated 180 degrees. In addition to the comfort of a sedan, an MPV offers the spaciousness of a small passenger van. Its adjustable interior space meets the unique demand for 'compact size, large space,' making it ideal for both family and travel needs.
Was this review help?
18
3
Share
MargaretLynn
08/10/25 3:07pm
A six-seater business vehicle typically includes the driver's seat, which means there are a total of six seats—one for the driver and five for passengers. Common MPV models like the Buick GL8 or Toyota Sienna often feature a 2+2+2 layout: front-row driver and passenger seats, two independent captain's chairs in the middle row, and a bench seat in the rear. This design is practical for business receptions or family trips, providing the driver with a dedicated control space while ensuring passengers have ample room. From my experience on several long-distance trips, if only passenger seats are counted, the vehicle might be labeled as a five-seater, but a six-seater explicitly includes the driver to avoid confusion. When purchasing such a vehicle, check that the number of seat belts matches to ensure each seat is legally compliant. Additionally, always confirm the seating configuration before renting or buying, as some special models may be customized, though the market standard follows this layout. Overall, understanding that the count includes the driver can help you make a more informed choice when selecting a vehicle.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

How to Use the Manual Mode in Lynk & Co 01?

When you need to use the manual mode, shift from "D" to manual mode, the gear remains unchanged. Depending on the slope, push the gear to the left to downshift. When overtaking at high speed, if you are in a high gear, the correct approach is not to continue pressing the accelerator, but to quickly downshift using the manual mode of the transmission.
6
0
Share

How to Turn on the Fog Lights on a Lynk & Co 01?

The fog light switch is located on the lighting stalk to the left of the steering wheel. Rotate the stalk to turn on the fog lights, but note that the parking lights must be turned on first. The lighting stalk includes controls for parking lights, width indicator lights, low beams, and high beams. Pushing the stalk up or down activates the vehicle's left or right turn signals, while returning it to the middle position turns them off.
18
5
Share

How to Take Out the Mechanical Key of Lynk & Co 03

Press the button on the side of the remote key to eject the mechanical key. First, flip a switch behind the button, then pull out the cover plate. Move the cover plate to remove the key back cover. The mechanical key is hidden inside and can be taken out for use.
12
5
Share

What to Do If the Motorcycle ABS Light Stays On?

Check the wiring connection between the wheel speed sensor and the ABS control unit. Inspect the installation gap and position of the wheel speed sensor and the tone ring, as well as any contamination by dust or debris. Check if the wheel bearing gap is too large. Sensor malfunction: If the ABS warning light comes on while riding, it will cause all four wheels to lock up during emergency braking, meaning the ABS system does not function at all.
1
0
Share

What to Do When the Motorcycle Lights Are On but It Won't Start?

First, try starting the motorcycle and then increase the RPM to run it for a while. Check if the battery voltage has increased. You can observe it on the motorcycle dashboard or directly connect a multimeter to the battery terminals. If there is no fluctuation in the battery voltage after starting, it indicates a damaged generator or the connection wire between the generator and the battery. In this case, you can replace the engine coil or the connection wire.
6
5
Share

How to Adjust the Brake Light Wire of a Motorcycle?

Step on or hold down the rear brake and keep it pressed. Loosen the screw on the rear brake caliper, and brake fluid will seep out. After 1 or 2 seconds, tighten the screw. Throughout this process, keep the rear brake pressed, and you can release it only after finally tightening the screw. Pump the rear brake repeatedly about a dozen times to enhance the break-in.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.