Does a new car need maintenance after 3 months and 1000 kilometers?

Is the car unable to start because of no power?

The car may fail to start due to a dead battery. Here are specific reasons why a car with a functional battery still can't start: 1. Ignition wire issues: Problems such as aging distributor wires, incorrect cylinder wire sequence, damaged distributor, or loose spark plug caps may occur; When starting the engine, if there's an obvious sound of the starter working, it indicates the power supply is fine and the starter functions normally, possibly pointing to a blocked fuel line or insufficient fuel supply. 2. Incorrect gear position: Normally, P (Park) or N (Neutral) is the starting gear for automatic transmission vehicles. If the gear is in R (Reverse) or another position, not only will the car fail to start, but it also poses certain safety risks; Once an incorrect gear is detected, adjust it promptly.

1

4

Share

Where is the BMW 3 Series cigarette lighter fuse located?

The fuse for the BMW 3 Series cigarette lighter is located in the central console fuse box. Here are the relevant details: 1. Precautions: The cigarette lighter can only be pressed in when the engine is running or the ignition is on. Once the lighter pops out, it can be removed for lighting cigarettes. When handling a hot cigarette lighter, only hold it by the head to avoid the risk of burns. Always take the remote control with you when leaving the car to prevent hazards such as children using the cigarette lighter and getting burned. 2. Power specifications: When using a car inverter, the output power through the cigarette lighter typically comes in specifications of 20W, 40W, 80W, 120W, and 150W. It is advisable not to exceed a maximum power of 120W for electrical devices.

18

1

Share

Will Using a Car Cover in Summer Lower the Temperature Inside the Car?

Using a car cover in summer can lower the temperature inside the car. Precautions for using car covers in summer: 1. Always park the car in a shaded area: Covering the car can cause an abnormal rise in temperature, which may affect the paint and even the interior. Additionally, ensure the engine is cool before covering; avoid putting on the cover immediately after driving when the engine is still hot. The enclosed space under the cover, which is neither breathable nor waterproof, can hinder heat dissipation and potentially damage the engine. 2. Use a car cover with a support frame: A car cover in summer not only provides sun protection and dust prevention but also shields the paint from harmful substances like bird droppings and tree sap. However, some believe that covering the car traps heat inside, making it stuffier. If the cover feels non-breathable, opt for one with a support frame. This design prevents fabric-to-paint friction and utilizes air insulation to improve airflow to some extent.

4

Share

What to Do When Water Gets Inside the Car?

When water gets inside the car after rain, promptly dry the electrical components of the vehicle. If possible, use a fan to dry the interior to prevent short circuits in the wiring. Regularly check if the drainage in the waterproof channel at the front windshield is clear to avoid water accumulation during rainy days, which could lead to water entering the engine. Here are methods to identify flood-damaged and accident-damaged cars: 1. Check the car locks: Look for signs of forced entry, damage, or traces of glue injection. Then, use the key to open each door to see if the locks are from the same set and if each door lock turns easily. Note that if turning is very difficult or the key almost breaks before the door opens, it might be due to flood damage causing the central locking motor to rust and malfunction. 2. Engine compartment: Inspect the engine compartment for broken or loose brackets of lighting and signal lamp groups. Check the wire connectors and sockets. If there is a large amount of mud or rust spots inside, it may indicate a flood-damaged car. 3. Engine compartment inspection: Examine the wires and vacuum tubes on the engine body, and look for mud traces in the gaps between the high-voltage ignition coils and spark plugs. Assess whether the aging and cracking of tubes and wires match the car's age and check the fixation of fuel injectors. Rust on springs can also help determine the likelihood of the car being flood-damaged.

17

3

Share

What Causes the Warning of Water in Fuel for Diesel Vehicles?

There are many reasons why a diesel vehicle may indicate water in the fuel: leakage from the water seal (for engines equipped with one), damage to the water channel cover, cylinder head gasket failure, or cracks in the engine block, cylinder head, or cylinder liner. If the engine is functioning normally, the possibility of a cylinder head gasket failure can be ruled out. For engines with a water seal, the oil pan can be removed to check if the water seal is leaking (without draining the water). If the water seal is intact, further troubleshooting is required. Below is an introduction to automotive urea: 1. Origin: Automotive urea solution was first used in Europe, where it is called AdBlue. In North America, it is referred to as DEF (Diesel Exhaust Fluid). In China, it is known as automotive urea solution or "automotive denitrification agent." However, it is now commonly referred to as "automotive urea" in China. 2. Function: Automotive urea solution is crucial for reducing pollutant emissions from diesel vehicles. It is a urea-based chemical reagent, composed of high-purity urea and deionized water, forming a 32.5% concentration solution. The application of automotive urea solution in SCR systems is key to ensuring that engine exhaust emissions meet China IV and higher emission standards.

3

5

Share

What precautions should beginners take when using windshield wipers on rainy days?

Here are the precautions for beginners using windshield wipers on rainy days: 1. Maintain cleanliness: When there are streak marks on the glass surface, the wiper blade may be dirty. You can sprinkle alcohol on a towel and wipe the surface of the wiper blade. Cleaning once a month can improve the working efficiency of the wiper. 2. Check the rubber: If the wiper makes unusual noises while working, the rubber blade may be aging or cracked. If the wear is not severe, you can use sandpaper to smooth out rough spots on the surface. 3. Avoid sunlight: Park the car in a shaded area away from direct sunlight, such as a garage. Summer is particularly harsh on cars. Wiper blades are rubber products, and exposure to sunlight will only accelerate their aging. 4. Refill fluid: Adding plain water directly to the windshield washer fluid reservoir is not conducive to the maintenance of the windshield and wiper blades in the long run. To ensure the longevity of the components, always use proper windshield washer fluid. Refill the washer fluid in time to be prepared for unexpected needs.

18

2

Share

Does a new car need maintenance after 3 months and 1000 kilometers?

Is the car unable to start because of no power?

Where is the BMW 3 Series cigarette lighter fuse located?

Will Using a Car Cover in Summer Lower the Temperature Inside the Car?

What to Do When Water Gets Inside the Car?

What Causes the Warning of Water in Fuel for Diesel Vehicles?

What precautions should beginners take when using windshield wipers on rainy days?

Can the Parking Air Conditioner Be Used While Driving?

How to Add Urea to a Diesel Vehicle?

How to Claim Insurance for Water-Damaged Vehicles After Rain?

What to Do When Unable to Contact the Owner of a Car Parked at the Entrance?