Does a new car need inspection in the 4th year?

What is the wheelbase of the BYD M6?

The wheelbase of the BYD M6 is 2960mm, nearly 3 meters. The wheelbase determines the interior space size of a vehicle. The BYD M6 is positioned as a mid-size MPV with 7 seats. In terms of body dimensions, the BYD M6 measures 4820mm in length, 1810mm in width, and 1765mm in height. For the powertrain, this model is equipped with a 2.4L inline 4-cylinder naturally aspirated engine, paired with a 6-speed automatic transmission. It delivers a maximum power of 123KW and a peak torque of 234Nm, with maximum power achieved at 6000rpm and peak torque at 4000rpm. The fuel supply system adopts multi-point electronic injection. The BYD M6 features front-wheel drive exclusively. Regarding suspension, it utilizes a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.

14

5

Share

What does it mean when a cylinder misfires occasionally but returns to normal after restarting?

The following are the reasons for occasional cylinder misfires that return to normal after restarting: 1. Ignition system: Aging of ignition coils and spark plugs can cause the cylinder's ignition system to fail. When ignition coils malfunction, it most commonly leads to a decrease in power, and in severe cases, can cause the engine to stall suddenly. 2. Cylinder wire wear: To check if the cylinder wires are functioning properly, simply pull out the distributor wire, insert a spark plug, and start the engine to observe. Comparing each cylinder will reveal any issues. 3. Fuel injection system: Clogged fuel injectors or fuel lines can prevent the cylinder from receiving sufficient fuel for combustion, naturally causing the cylinder to malfunction. 4. Excessive spark plug carbon buildup: Long-term poor combustion leads to carbon deposits accumulating at the spark plug ignition point. When these deposits are wetted by fuel, they create a parallel shunt resistance, resulting in spark plug leakage, weak sparks, or even complete spark plug failure.

4

Share

Should I Use D or S Gear for Climbing Hills?

Use the S gear for climbing hills, as the S gear provides better power and is suitable for uphill driving. The D gear in an automatic transmission is the forward drive gear, used during normal driving. Generally, the gears of an automatic transmission in a car are divided into P, R, N, D, 2 (or S), and L (or 1). The gears of an automatic transmission car are as follows: 1. The P gear is the parking gear and the starting gear. 2. The R gear is the reverse gear. 3. The N gear is the neutral gear. 4. The D gear is the forward drive gear, also known as the driving gear. 5. The L gear is the low-speed gear. When going downhill or descending a long slope, shifting into this gear restricts the car's gear to automatically stay in the lowest gear (equivalent to the first gear in a manual transmission car). 6. The S gear is the sport mode. In this gear, the transmission can shift freely, but the shifting timing is delayed, maintaining higher RPMs for a longer time to increase the vehicle's power.

12

0

Share

How to Remove the Tiida Dashboard?

Method for removing the Tiida dashboard: 1. Gently unclip the retaining ring and remove the four screws on the dashboard; 2. Take off the rear cover; 3. The dashboard circuit board will then be visible, completing the disassembly. The Tiida is a vehicle produced by Dongfeng Nissan Passenger Vehicle Company, serving as the hatchback version of the Latio, and it uses the same engine as the Latio with no changes in power performance. The Tiida is equipped with a 1.6L naturally aspirated HR16 engine jointly developed by Nissan and Renault, delivering a maximum horsepower of 122 PS and a maximum torque of 155 Nm. In terms of body dimensions, the Tiida measures 4.250 meters in length, 1.695 meters in width, and 1.535 meters in height.

3

2

Share

What is coasting in neutral and coasting with clutch engaged in gear?

When coasting in neutral, the engine power output is completely disconnected from the transmission. To re-engage power, both the clutch and transmission must be operated together. When coasting with the gear engaged, the engine power output is partially disconnected, with the degree of disconnection controlled by the clutch engagement level. Below are detailed explanations of coasting in neutral and coasting with clutch engaged in gear: 1. Coasting in neutral: Coasting in neutral must be performed under conditions of safety and normal vehicle technical status, and engine-off coasting is not permitted. Especially when descending steep or long slopes, neither engine-off coasting nor coasting in neutral is allowed. 2. Coasting with clutch engaged in gear: When the vehicle is coasting with the gear engaged and the foot is off the accelerator pedal, the engine speed will quickly drop to idle speed. The throttle position sensor detects this signal and transmits it to the computer, which then controls the fuel injection pulse width according to the designed idle conditions to maintain the engine at idle speed.

15

5

Share

Under What Circumstances is ECO Mode More Fuel-Efficient?

In congested urban traffic conditions, activating ECO mode yields the best fuel-saving results. In such stop-and-go city driving scenarios where high power output is unnecessary and fuel consumption tends to be elevated, enabling ECO mode not only reduces fuel usage but also enhances driving comfort. Scenarios where ECO activation is unnecessary: There are limited circumstances where ECO mode isn't required: 1. During high-speed driving (exceeding 100km/h) - even with ECO engaged, the vehicle's computer prioritizes maintaining speed, automatically deactivating ECO functionality. 2. When substantial torque output is needed, such as during hill climbing - the engine control unit will prioritize delivering sufficient power to propel the vehicle, causing ECO mode to automatically disengage. ECO button location: The ECO button is typically positioned on the left side of the vehicle's dashboard, clearly marked with 'ECO' lettering. Some manufacturers use distinctive green coloring for this button, making it easily identifiable.

6

1

Share

Does a new car need inspection in the 4th year?

What is the wheelbase of the BYD M6?

What does it mean when a cylinder misfires occasionally but returns to normal after restarting?

Should I Use D or S Gear for Climbing Hills?

How to Remove the Tiida Dashboard?

What is coasting in neutral and coasting with clutch engaged in gear?

Under What Circumstances is ECO Mode More Fuel-Efficient?

How to Remove the Front Wheel of a Haval H2?

How to reset the tire pressure light on a Civic?

Which car models share wheel hubs with the BYD F3?

What engine is used in the BMW F35?