Does a new car need a paint protection film?

1 Answers
DeElla
07/29/25 7:17pm
It is recommended to apply a paint protection film to a new car. Here are the reasons: 1. Excellent elasticity: The elasticity determines whether the paint protection film can perfectly fit the car body, as different parts of the car have varying curvatures. 2. Superb anti-yellowing properties: Over time, the car paint may appear old due to yellowing, which is irreversible and cannot be delayed. The film's strong anti-yellowing properties help maintain the car's fresh, new look for a long time, with a warranty period of up to 10 years. 3. Crystal-like transparency: Paint protection films are generally transparent, and their excellent transparency allows them to blend seamlessly with the car, not affecting the paint color while further enhancing the car's brightness.
Was this review help?
9
1
Share
More Forum Discussions

Correct Method for Warming Up and Starting an Automatic Transmission Vehicle

When entering the vehicle, the owner only needs to carry the key and stand within the detector range (within 2 meters), then directly open the door for convenient access to the car. After the driver is seated, press and hold the brake pedal, then gently press the one-touch start button. At this point, the vehicle's systems will power on and enter the self-check procedure. Observe if there are any warning alerts. While keeping the brake pedal depressed, shift the gear to N (Neutral) position, then press the one-touch start button again to start the engine. Allow the engine to warm up slightly for about 30 seconds. Observe the surrounding conditions of the vehicle, turn on the left turn signal, press the brake pedal to shift to N or D (Drive) gear, release the handbrake, then slowly release the brake pedal to start moving.
17
1
Share

How to Open an Audi Car Key to Replace the Battery?

Method to open an Audi car key for battery replacement: 1. There is a movable clasp at the corner of the key with a pointing triangle, which can be gently moved by hand; 2. Use one finger to move the clasp while the other hand pulls out the car key from the side; 3. After removing the hidden key, observe the original shell corner where there are two natural indentations that match the size of the original car's hidden key; 4. Use the extracted hidden key to align with the indentations, press the hidden key against the key shell and turn it; 5. After turning, the key shell will naturally pop open, then gently open it with both hands; 6. Remove the old battery to replace it with a new one. Audi is a world-renowned automobile developer and manufacturer, founded in 1898, with its logo being four rings, symbolizing the alliance of four automobile brands. Audi's main mass-produced car series include the A series, Q series, R series, TT series, S series, RS series, and the Allroad series derived from the A series.
5
5
Share

Where is the ECO switch located on the Highlander?

The ECO switch on the Highlander is located on the right side of the steering wheel. Use the right directional button to select functions, then press the down directional button to scroll down until you see ECO, and finally use the center button to toggle the switch on or off. How ECO works: ECO primarily operates by comprehensively analyzing and evaluating various factors during vehicle movement that affect fuel consumption, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel quantity to supply the engine for operation, effectively reducing fuel consumption compared to normal driving modes. Simply put, it controls the engine speed with appropriate gear selection to minimize unnecessary fuel consumption. When to use ECO mode: The ECO mode is most effective when driving in congested urban traffic. In such stop-and-go conditions where strong power is not required and fuel consumption tends to be high, activating ECO mode not only reduces fuel consumption but also enhances driving comfort.
8
4
Share

Why is the LANGDONG seat slightly tilted?

Check if the seat mounting bracket is loose and address the issue accordingly. Here are the solutions: 1. There are adjustment buttons beside the LANGDONG seat that the driver can use for adjustments. Setting the appropriate seat height is fundamental for obtaining a good driving view. When adjusting the seat, height adjustment should typically be the first step. Ensure there's at least a fist's distance between your head and the car roof to prevent head impact during bumps. 2. For adjusting the seat's fore-aft position, except for people with special height requirements, having the seat too far forward or backward is incorrect. A seat too forward reduces limb movement space. The correct approach is to ensure your right leg maintains a slight natural bend at the knee when fully depressing the brake pedal. During this process, you can also adjust the steering wheel to a suitable height. The adjustment principle is that when holding the 9 o'clock position, your arms should maintain a comfortable bent angle between 90 to 120 degrees.
4
0
Share

Can the License Plate Be Retained When Transferring Vehicle Ownership?

The original owner of the vehicle can choose to retain the original license plate when transferring ownership. After the vehicle transfer, the original license plate can be applied for retention within two years. If not used within this period, the license plate number will be automatically revoked. If the original owner wishes to keep the license plate, they must promptly apply to the relevant authorities to use the plate on a newly purchased vehicle; otherwise, the plate will be forfeited. According to Article 52 of China's "Motor Vehicle Registration Regulations": After completing the transfer or cancellation of motor vehicle registration, the original owner may apply to the vehicle management office to use the original license plate number when registering a newly purchased vehicle. To apply for the use of the original license plate number, the following conditions must be met: The application must be submitted within six months after the transfer or cancellation of registration. The original owner must have owned the vehicle for at least three years. All traffic violations and accidents involving the original vehicle must be resolved. Documents required for the original owner during a used car transfer include the registration certificate, vehicle license, and ID card. The buyer must provide an ID card, and if they are from another region, a residence permit or temporary residence certificate is also required. The vehicle transfer process begins with a vehicle evaluation. The evaluation fee is typically 1%-2% of the assessed vehicle value, with additional costs for license plates, vehicle licenses, etc. The original owner's commercial insurance can be canceled (compulsory insurance cannot be canceled) or transferred to the buyer through the insurance company. Important considerations when purchasing a used car: Incomplete documentation. Complete used car documentation includes the vehicle registration certificate (or original purchase invoice), vehicle license, vehicle purchase tax certificate, road maintenance fee records, and compulsory insurance. Missing documents or unpaid fees can cause significant issues for the buyer, so caution is advised if the seller cannot provide complete documentation. Odometer tampering. Many buyers rely on the odometer to judge a vehicle's condition, and sellers may manipulate it. The odometer not only indicates usage but also serves as a record for maintenance and part replacements. Relying on a tampered odometer for maintenance can pose safety risks. New paint hiding damage. If a used car has been repainted, especially around the front, rear, or A, B, and C pillars, it may have been involved in a major accident. Engine modifications to inflate price. Buyers often focus on the engine's condition, neglecting the rest of the vehicle. Sellers may replace engine parts to make the vehicle appear newer and justify a higher price.
13
2
Share

What are the penalties for obscuring a vehicle's license plate?

If a motor vehicle is not displaying its license plate, the traffic management department of the public security organ shall detain the vehicle and notify the party to provide the corresponding plate and markings. Driving a motor vehicle on the road without displaying its license plate, or intentionally obscuring, defacing, or not installing the license plate as required, will result in a deduction of 12 points. Intentionally obscuring or defacing a license plate will result in a fine and a deduction of 6 points.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.