Does a Motorcycle Not Being Scrapped Affect the Annual Inspection of a Car?

1 Answers
JasperDella
07/29/25 10:43pm
Failure to scrap a motorcycle does not affect the annual inspection of a car. However, if the motorcycle license and car license are combined, it may affect the annual inspection of the driver's license. Timeframe: No penalty will be imposed for being one day overdue. For vehicles overdue for inspection by less than a year, applying for a replacement inspection procedure at the vehicle management department will not result in penalties. However, if the inspection is overdue by more than a year, a penalty of 3 points deduction may be imposed, and the vehicle may be temporarily impounded. Penalties: For motor vehicles driven on the road without displaying an inspection compliance label, the vehicle may be impounded, and 1 point may be deducted. Failure to purchase compulsory traffic insurance will result in a penalty of twice the amount of the compulsory insurance premium.
Was this review help?
14
1
Share
More Forum Discussions

What are the 7-seater off-road vehicles available?

7-seater off-road vehicles include Audi Q7, Mercedes-Benz GLB, Mercedes-Benz GLE, Mercedes-Benz GLS, BMW X7, BYD Tang, Tang New Energy, Enclave Plus, Enclave, Peugeot 5008, Baojun 530, Borgward BX7, Changan CS95, Changan Oushang X70A, Changan Oushang Kosai PRO, Tiguan L, Teramont, Highlander, Crown Kluger, and more. Here are some extended details: 1. Highlander's body dimensions: The body length is 4890 mm, width is 1925 mm, height is 1720 mm, wheelbase is 2790 mm, front track is 1635 mm, rear track is 1630 mm. The vehicle is a five-door, five-seat or seven-seat SUV model with a fuel tank capacity of 75.2 liters. 2. Highlander's manufacturer: The manufacturer is GAC Toyota. GAC Toyota Motor Co., Ltd. was established on September 1, 2004, headquartered in Guangzhou, China. It is a Sino-Japanese joint venture, jointly funded by China's GAC Group Co., Ltd. and Japan's Toyota Motor Corporation, with a cooperation period of 30 years.
14
4
Share

What is the standard fuel tank capacity for semi-trailers?

Semi-trailer fuel tank standard introduction: Generally, small vehicles have a fuel tank capacity of 35-45 liters, while medium-sized vehicles have a fuel tank capacity of around 55-75 liters. After filling up the tank, they can usually travel about 500 kilometers. The fuel tank size varies depending on the vehicle's displacement—larger fuel consumption means a bigger tank, and smaller consumption means a smaller tank. A larger fuel tank capacity generally allows for a range of 400~600 kilometers. More related information is as follows: 1. Fuel tank capacity measurement unit: The international standard uses L (liters) as the measurement unit for vehicle fuel tank capacity. Different countries also have corresponding standards for fuel tank capacity. The regulation states that the fuel tank capacity should be 95% of the rated value, but in reality, the actual capacity is usually larger than the nominal capacity, so there is no need to worry about the fuel tank being smaller than expected. 2. How to check the fuel tank capacity: Generally, the fuel level can be observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5-6 segments, with each segment representing the remaining fuel capacity in the tank. It is recommended to refuel when the fuel gauge shows only two segments left to avoid running out of gasoline midway.
20
0
Share

What does the dashboard indicator with a seat and a round ball mean?

The dashboard indicator showing a seat and a round ball is the airbag warning light. If road conditions permit, when the safety warning light comes on, you can find a safe place to temporarily stop, turn off the engine, disconnect the negative terminal of the power source, wait for 5-10 minutes, then reconnect it, restart the engine to complete the vehicle self-check, and then check if the airbag light on the dashboard is still illuminated. Possible reasons for the airbag light being on: 1. Reason one: Issues such as steering wheel clock spring failure, loose or poor contact of the airbag sensor, airbag body failure, or airbag ECU circuit failure. These issues cannot be confirmed by simple disassembly and inspection but require using a diagnostic tool to read fault codes and systematically troubleshoot, then repair or replace the faulty components. After completion, the airbag warning light on the dashboard can be reset. 2. Reason two: The airbag light may come on due to a false fault, caused by the vehicle's battery being low on power or the use of other electrical equipment affecting the airbag's electronic control signals, ultimately sending incorrect feedback to the ECU and triggering the indicator light. In this case, simply use a diagnostic tool to clear the fault codes.
11
0
Share

What is the forward position for parallel parking?

Detailed introduction is as follows: 1. Right-side distance: The distance on the right side greatly affects the success of parking. If it's too narrow or too wide, the front of the car will have difficulty entering the parking space smoothly. Generally, staying slightly to the right of the normal driving position is the optimal distance. Avoid getting too close, as this will cause the front of the car to be too close to the car in front, leading to parking failure. Typically, 50 centimeters is the best distance. 2. Forward position: After mastering the right-side distance, usually drive until the rear wheel aligns with the rear of the car on the right. If the distance between your car and the car on the right is too close, you don't need to drive forward as much. 3. 45-degree steering wheel to the left: This usually depends on the distance between the left rear wheel and the left line of the parking space when the car is at a 45-degree angle. If the distance is far, straighten the steering wheel and reverse until the left rear wheel is about to touch the line, then turn the steering wheel fully to the left. 4. Right front of the car: Many people are most uncertain about this step in parallel parking, often feeling that the right front of the car is about to scrape the rear of the car in front, leading to hesitation and reversing too much, resulting in insufficient space at the back to complete the parking.
4
1
Share

Different Production Dates for New Car Glass?

As long as the production date of the glass is earlier than the vehicle's manufacturing date, there is no issue. The glass is uniformly procured by the manufacturer from suppliers. It must be purchased in advance and then used for vehicle assembly, hence the varying production dates. Since the glass is purchased in different batches, the dates will naturally differ. Unused glass from the same batch must be installed in the next vehicle. Car glass is externally sourced and assembled. During installation, it is randomly fitted based on the production batch, so differing dates are normal. Therefore, if the glass production date is later than the vehicle's manufacturing date or on the same day, it would indicate a problem. Additionally, the vehicle's production date refers to the date it enters the assembly line, which certainly won't be the same as the glass production date. The most common method for expressing glass production dates in the market currently is a combination of numbers and dots. The number represents the year, and the dots represent the month. The dots can appear before or after the number. Dots before the number indicate the first half of the year, with the number of dots multiplied by 7 representing the month. Dots after the number indicate the second half of the year, with the month calculated by subtracting the number of dots from 13.
7
5
Share

What Are the Causes of Increased Diesel Engine Oil?

Specific reasons are introduced as follows: 1. Water entering the engine oil (or coolant): This is usually due to damage to the cylinder gasket or water plug (for vehicles with an oil cooler, it could also be damage to the oil cooler). 2. Diesel fuel entering the engine oil: This is typically caused by internal leakage in the fuel injector or fuel pump. 3. Overfilling of engine oil: This is usually due to insufficient inspection during oil changes. If the oil pressure is significantly lower than before, it indicates diesel fuel entering the oil, either through the fuel injector (where the injector fails to function properly, allowing fuel to flow down the cylinder wall into the oil pan) or due to damage to the sealing rings of the high-pressure pump or hand fuel pump. Additional Information: If there are sand holes or cracks in the cooling water cavity of the cylinder block or cylinder head, cooling water can enter the oil pan. When the 'engine oil' in the oil pan increases, timely and appropriate measures should be taken. Otherwise, the dilution and degradation of the 'engine oil' can make it difficult to form a lubricating oil film on moving parts such as the crankshaft and bearings, leading to severe mechanical failures like 'bearing seizure' or 'crankshaft seizure.'
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.