Does a motorcycle need repairs after wading through water?

1 Answers
Saul
07/30/25 8:00am
It is advisable to visit a repair shop to replace some parts after a motorcycle has waded through water. Below is relevant information about vehicle wading: Introduction to vehicle wading: As the name suggests, vehicle wading refers to driving through low-lying areas or roads with accumulated water. This typically occurs during rainy weather when inadequate drainage leads to water accumulation in low-lying road sections. Precautions for vehicle wading: Before wading, observe the road conditions carefully; maintain steady power while in the water; after wading, inspect the electrical system. If a car stalls in water, the primary cause is usually water entering the exhaust pipe, though in some cases, electrical damage may also occur. Once a car stalls, do not attempt to restart it, as this could lead to water entering the intake manifold and damaging the valves, potentially resulting in severe engine failure. Instead, the car should be towed to a 4S shop immediately for professional handling.
Was this review help?
13
0
Share
More Forum Discussions

How to Deal with Paint Spots on Car Surface?

Methods to deal with paint spots on car surface are: 1. Dip a towel in banana oil and gently wipe the paint spots to dilute the paint, then rinse with clean water; 2. Gasoline can dissolve paint effectively with minimal corrosiveness. Dip a towel in gasoline and gently wipe the paint spots, then rinse with clean water; 3. Paint can be removed by wiping with alcohol (industrial alcohol). Use a soft cotton cloth dipped in alcohol to gently wipe the paint; 4. Essential balm can also dissolve paint and can be used to clean paint spots. Dip a cotton cloth in essential balm and gently wipe the paint.
20
5
Share

How often should the transmission fluid be changed for the Haval H2?

The official maintenance manual for the Great Wall Haval H2 recommends changing the transmission fluid at 6,000 kilometers, 52,000 kilometers, and 100,000 kilometers. After that, it should be replaced every 50,000 kilometers or every three years, whichever comes first. More details about the Haval H2 are as follows: 1. Detail 1: The Great Wall Haval H2 is equipped with three types of transmissions. The manual transmission is a 6MT developed by Great Wall itself. The automatic transmission, a 6AT, is sourced from Hyundai's HPT, a subsidiary of the Hyundai Group, which supplies transmissions for many Hyundai/Kia models. This transmission is also used in models like the Zhonghua V5, with smooth shifting being its standout feature. 2. Detail 2: The Haval H2's 7-speed wet dual-clutch transmission is a product of Getrag. Its internal structure is similar to a manual transmission, using gear meshing for power transmission, which allows for shorter shift times and better power transfer efficiency. The dual-clutch transmission eliminates torque interruption, ensuring continuous engine power utilization. 3. Detail 3: This design contributes to fuel savings and excellent fuel economy. Additionally, the wet clutch has a wider threshold for tuning, eliminating the need for rapid shifts to control temperature as in dry clutches, which can cause jerking and hesitation. Therefore, the wet clutch offers better smoothness compared to dry clutches.
13
2
Share

At approximately what temperature does the car's cooling fan start operating?

Car's cooling fan typically starts operating when the coolant temperature reaches around 90 degrees Celsius, though this threshold varies across different vehicle models. The fan operates at low speed when the temperature is between 92°C to 95°C, and switches to high speed between 102°C to 105°C. When the air conditioning system is in use, the radiator fan will also activate since the AC condenser requires fan-assisted cooling - in this scenario, the fan runs at low speed. When engine coolant temperature rises and requires additional cooling, the radiator fan will engage high-speed operation mode, resulting in noticeably higher fan rotation speed and noise compared to low-speed mode.
6
0
Share

What Does the Dashboard Exclamation Mark Mean?

Dashboard exclamation mark represents: 1. Handbrake warning light, used to indicate the status of the handbrake, which remains lit when the handbrake is not fully released; 2. Malfunction indicator light, which illuminates when faults occur in the clutch, fuel supply system, parking sensors, lights, engine oil pressure sensor, or traction control system; 3. Brake system warning light, generally triggered by low brake fluid level or brake system malfunctions; 4. Tire pressure monitoring warning light, which activates when tire pressure is either too low or too high.
4
4
Share

What are the reasons why a car cannot drive even after refueling?

Specific reasons why a car cannot drive even after refueling include incorrect oil quantity, oil-engine mismatch, and clogged oil filter. The main reasons are as follows: Incorrect oil quantity: There is a specified standard when changing the car's oil. If too much oil is added, the crankshaft will operate with more difficulty, requiring greater power to push, resulting in sluggish acceleration. Excessive oil can leak into the combustion chamber, leading to rapid oil consumption and engine carbon buildup, which also harms the engine. If too little oil is added, parts won't receive sufficient lubrication, and power will weaken. Use the dipstick to check the oil level and add oil up to slightly above the middle line. This ensures adequate engine lubrication without putting excessive pressure on the crankshaft. Oil-engine mismatch: Different engines require different oils. If acceleration becomes sluggish after an oil change, it may indicate a mismatch. Oil with too high viscosity makes crankshaft operation difficult, while oil with too low viscosity may cause the engine to produce noise. It is recommended to replace the oil again, following the oil standards specified in the car's manual. Clogged oil filter and severe carbon buildup: When changing the oil, the oil filter should generally be replaced as well. If the oil filter is clogged and not replaced promptly, oil will bypass through the relief valve, leading to reduced car power and increased engine wear.
11
3
Share

How to Solve Shock Absorber Oil Leakage?

Shock absorber oil leakage cannot be repaired; the only solution is to replace it with a brand-new shock absorber. The oil leakage is caused by the aging of the oil seal. Once the shock absorber leaks oil, it will affect the car's chassis feel and handling performance. If the shock absorber shows severe oil leakage, it must be replaced immediately. During the installation of the shock absorber, a professional torque wrench must be used to tighten the screws according to the specified torque. After installing the new shock absorber, it is recommended to perform a four-wheel alignment to prevent the car from pulling to one side or uneven tire wear. It is advisable to choose original equipment manufacturer (OEM) shock absorbers. If OEM products are not available, opt for shock absorbers from reputable brands or those suitable for the owner's vehicle.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.