Does a Light Enclosed Truck Belong to the Category of Small Trucks?

1 Answers
GiaMarie
07/30/25 1:53am
Light enclosed trucks belong to the category of small trucks. Below is the relevant introduction: Light Enclosed Truck: It is a type of cargo vehicle where the cargo area is structured as an enclosed compartment integrated with the driver's cabin, featuring a monocoque design as a van-type cargo vehicle. Also known as container trucks or enclosed trucks, van-type trucks are commercial vehicles primarily used for transporting goods, characterized by an independent enclosed structure or a monocoque design integrated with the driver's cabin. Vehicle Parameters: Heavy-duty cargo vehicles are defined as those with a vehicle length ≥6m and a total mass ≥12,000kg; medium-duty cargo vehicles have a vehicle length ≥6m and a total mass ≥4,500kg but <12,000kg; light-duty cargo vehicles have a vehicle length <6m and a total mass <4,500kg; micro cargo vehicles have a vehicle length ≤3.5m and a load capacity ≤750kg.
Was this review help?
18
1
Share
More Forum Discussions

Analysis of Geely King Kong Chassis

Geely King Kong's chassis suspension adopts a relatively simple combination of front MacPherson independent suspension and rear twist-beam non-independent suspension, which is quite common among vehicles in the same class, with overall solid performance. Ground clearance of Geely King Kong: The ground clearance (minimum ground clearance) of Geely King Kong is 15cm, providing excellent passability to handle various road conditions. Generally, the ground clearance of sedans ranges between 11-15cm. A higher ground clearance (>13cm) indicates better passability, but slightly poorer stability at higher speeds. Conversely, a lower ground clearance (<11cm) means better high-speed stability but poorer passability. Front suspension system of Geely King Kong: The front suspension system of Geely King Kong uses the most popular suspension today—the MacPherson independent suspension. By managing the vertical contact between the wheels and the ground, it fully unleashes the King Kong's handling performance, offering strong road adaptability. However, due to the simple structure of the MacPherson suspension, it cannot provide sufficient lateral support, resulting in noticeable steering roll and brake dive.
18
5
Share

What are the tips for starting on a slope with a 30cm distance?

After hearing the voice prompt, you need to drive forward and stay to the right. When you see the right front corner of the engine hood (about 1/3 of it) align with the roadside line, the distance between the car body and the roadside line is exactly 30cm. From the driver's seat, when the raised part of the wiper aligns with the right roadside line, the distance is approximately 30cm. Correct method for starting on a slope: When starting, shift into 1st gear, then slowly lift the clutch pedal with your left foot. After feeling the clutch engage, pause briefly, then continue to slowly lift the clutch pedal while gently pressing the accelerator pedal with your right foot. Once the clutch is fully engaged, keep your right foot on the accelerator. When the speed increases, you can shift to a higher gear. Reasons why manual transmission cars tend to stall when starting on a slope: Manual transmission cars stall during slope starts because the clutch is released too quickly. Practice is needed to improve clutch control.
12
1
Share

Should You Press the Clutch or the Brake First When Stopping at a Designated Point?

You should always press the clutch first and then the brake; otherwise, the vehicle is prone to stalling. Designated Point Stopping: Slope-designated stopping and starting is an assessment point in the driver's test. Test requirements: Stopping at a fixed position on a slope with ≥10% gradient and ≥30 meters length, examining the coordination of steering, braking, and clutch operation. The purpose is to train motor vehicle drivers to accurately judge the vehicle's position and correctly use the brake, gear, and clutch to meet the needs of stopping and starting on uphill sections. Precautions for Subject 2 Exam: There is no time limit for starting after getting into the car. First, close the door and check if the door light is off—this is crucial. Press the clutch all the way down with your left foot and hold it steady, grip the steering wheel with your right hand, adjust the seat with your left hand until your left leg is slightly bent and can exert force, and ensure the seat is stable by moving it back and forth for a test.
15
1
Share

What is the drag coefficient of the Neta U?

The drag coefficient of the Neta U is 0.3. Drag Coefficient: Air resistance is the largest and most significant external force encountered by a vehicle during motion. The air resistance coefficient, also known as the drag coefficient, is a crucial parameter for calculating a vehicle's air resistance. It is a mathematical parameter determined through wind tunnel tests and coast-down experiments, used to compute the air resistance a vehicle experiences while moving. The magnitude of the drag coefficient depends on the vehicle's shape. The larger the drag coefficient, the greater the air resistance. Modern vehicles typically have drag coefficients ranging between 0.23 and 0.5. Forms of Air Resistance: Frontal resistance occurs when airflow impacts the front of the vehicle, similar to holding a board against the wind, where most of the resistance comes from the airflow impact; Frictional resistance arises as air moves over the vehicle's surface, but at typical driving speeds, this friction is negligible; Form drag is the primary source of air resistance at high speeds. This type of resistance stems from the low-pressure area behind the vehicle—the larger this vacuum zone, the greater the resistance.
12
1
Share

Why is the BMW X3's startup sound so loud?

Startup sound loudness is a characteristic of the BMW X3. This is because the X3's four-cylinder engine uses N20 fuel injectors and has an additional high-pressure pump inside the cylinder block, resulting in louder sounds. Another reason is that one of BMW's dual exhaust pipes is equipped with a valve that remains closed at low speeds, causing higher idle RPM and louder sounds during startup. This is a normal phenomenon, and the sound will diminish after a dozen seconds. Below is relevant information about the BMW X3: 1. In terms of power, the X3 offers three 2.0T power options: low, standard, and high. The low-power version is called 25i, the standard-power version is 28i, and the high-power version is 30i. All models come with an 8AT transmission and standard all-wheel drive system. 2. The BMW X3 features a front double-ball-joint shock-absorbing suspension and rear multi-link independent suspension, equipped with an intelligent all-wheel-drive system. The central differential is a multi-plate clutch type, and the vehicle adopts a unibody structure.
9
4
Share

Is 3.0 bar tire pressure too high for Wuling mini truck?

Wuling mini truck's tire pressure of 3.0 bar exceeds the standard value and is relatively high. The standard should be maintained between 2.2 bar and 2.8 bar. Tire pressure is crucial for tires. Both excessive and insufficient pressure will shorten the tire's service life. Here are some key points about tire pressure: 1、Low tire pressure: Increases tire body deformation, easily causing cracks on the tire sidewalls while generating bending movements. This leads to excessive heat buildup, accelerating rubber aging, fatigue of the cord ply, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear. 2、High tire pressure: Causes excessive stretching deformation of tire cords, reducing the tire body's elasticity and increasing the load during driving. In case of impact, it may lead to internal cracks and blowouts. Additionally, excessive pressure accelerates tread wear and reduces puncture resistance.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.