···
Log in / Register

Does a faulty sensor in the Roewe RX5 affect driving?

4 Answers
Cook
07/29/25 5:42pm

It is not recommended to drive normally if the sensor in the Roewe RX5 is faulty, and it should be repaired as soon as possible. Below is relevant information about the sensor: Hazards of a faulty car sensor: The wheel speed sensor is usually installed on the hub of each wheel. Once it fails, the ABS will become ineffective. The air flow meter is generally installed between the air filter and the throttle body. If it fails, the engine speed will not increase. The water temperature sensor is usually located near the thermostat. If it fails, the engine will have difficulty starting during cold starts, idle unstably, and lack power during acceleration. Repair methods for a faulty car sensor: Disconnect the throttle position sensor's connector and use a multimeter in resistance mode to measure the resistance between the sensor's signal output terminal and the ground terminal. While connected, slowly change the throttle opening. The measured resistance should continuously increase with the throttle opening without any abrupt changes. Use the multimeter to measure the resistance between the sensor's idle contact (IDL) signal terminal and the ground terminal. When the throttle is closed, the resistance should be 0 ohms. As the throttle opens slightly to fully open, the resistance should be infinite.

Was this review help?
17
1
Share
StEsther
08/14/25 9:10am

I've been driving for over a decade and encountered various sensor issues. If the sensors fail in the Roewe RX5, it will definitely affect driving. For instance, if engine sensors like the oxygen sensor fail, the car might jerk, fuel consumption could spike dramatically, or it might even stall midway - you'd feel the power loss while driving, which is very uncomfortable. ABS sensor failures are even more dangerous, as the tires may lock up during braking, increasing the risk of skidding during rain or sharp turns. I once experienced a similar situation on the highway and had to pull over immediately in panic. Faulty tire pressure sensors are problematic too, as false alarms about air leaks can increase the risk of tire blowouts. Safety comes first - never ignore warning lights on the dashboard. The sensors in this car are crucial, so it's best to get it checked at a professional repair shop right away.

Was this review help?
9
4
Share
Expand All
DominicAnn
10/13/25 8:34am

My Roewe RX5 is usually used to take the kids to school, and it's really worrying if the sensors malfunction. If the camera or radar sensors fail, the assisted driving features become useless, which could be terrifying if I get distracted while driving and cause an accident. Engine sensor issues can also affect driving performance, such as the car failing to start or breaking down mid-drive—imagine how troublesome that would be in a remote area. If comfort-related sensors fail, like the temperature control malfunctioning or the AC blowing irregularly, driving becomes unbearable in summer heat or winter cold. Last time my sensor failed, I drove to the 4S shop, and the mechanic said it was good I handled it promptly—otherwise, fuel consumption would skyrocket, wasting money and degrading the driving experience. I advise fellow car owners not to delay—safety comes first.

Was this review help?
8
2
Share
Expand All
LaIsabella
11/27/25 2:45am

A faulty sensor in the Roewe RX5 definitely affects driving, making it uncomfortable and dangerous. I've driven cars with similar issues a few times—like when the ABS sensor fails, the brakes become stiff and prone to losing control; or when the engine sensor malfunctions, the engine shakes violently or even stalls, leaving you stranded. Sensors are like the car's nerves—if the dashboard warning light comes on, don't push your luck. Get it fixed quickly by a technician, and avoid driving it too much to prevent bigger expenses.

Was this review help?
14
5
Share
Expand All
More Forum Discussions

Is it necessary to repaint the front and rear bumpers of a car after scratches?

It is not necessary to repaint the front and rear bumpers of a car after scratches. Here is a detailed introduction about car paint: 1. Overview: The main function of car paint is to protect the car body from corrosion. In addition, car paint can also enhance the aesthetic appeal of the vehicle. Car paint is a type of coating. The purpose of a paint booth is to provide a clean, safe, and well-lit painting environment for car painting, ensuring that the painting process is free from dust interference and guaranteeing the quality of the paint job. 2. Composition: Car paint mainly consists of resin, pigment, additives, fillers, curing agents, solvents, etc. Metallic car paint usually includes reflective metallic flakes (aluminum powder), while pearlescent paint typically contains mica particles.
7
0
Share

What are the speed requirements for a 3-lane highway?

For roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, with a maximum speed of 120 km/h. The middle lane has a minimum speed of 90 km/h. The rightmost lane has a minimum speed of 60 km/h and a maximum speed of 120 km/h. Other lane speed limits: 1. For roads with two lanes in the same direction, the left lane has a minimum speed of 100 km/h and a maximum speed of 120 km/h. 2. For roads with four lanes in the same direction, the leftmost lane has a minimum speed of 110 km/h and a maximum speed of 120 km/h, the middle lane has a minimum speed of 90 km/h and a maximum speed of 120 km/h, and the rightmost lane has a minimum speed of 60 km/h and a maximum speed of 120 km/h.
8
2
Share

How Long After Production Date is a Domestic Car Considered a Stock Vehicle?

Domestic cars are considered stock vehicles if their production date exceeds 3 months. Below are relevant details about stock vehicles: 1. Introduction: There is no clear legal definition for stock vehicles, but the term "stock vehicle" does exist in the automotive sales industry, generally referring to cars that remain unsold for over a year. 2. How to Identify: Actually, there's no need to identify whether a car is a stock vehicle. For one, the vehicle's manufacturing date is clearly stated on its nameplate; for another, dealers won't conceal the identity of a stock vehicle because it's impossible to hide. What needs to be determined is whether the vehicle has been properly maintained and cared for during its stock period.
19
4
Share

What is the battery model for Mercedes-Benz remote control?

Most Mercedes-Benz key fobs use the 3V CR2025 battery model. For vehicles of the same era, whether it's a C-Class, E-Class, or S-Class, their key fobs are essentially the same, and the battery replacement methods are largely identical. The typical lifespan of a Mercedes key fob battery is about two years, while original factory batteries can last up to six years. Here are the warning signs when your Mercedes key fob battery is running low: 1. When you press the ignition switch, the dashboard will display a "Replace Key Battery" message. 2. Press the lock and unlock buttons on the key fob. If the indicator light on the key becomes dim or doesn't illuminate, it's time to replace the battery.
11
3
Share

Where Can I Rent a Manual Transmission Car?

Car rental apps can rent manual transmission cars. Information about manual transmission cars is as follows: 1. Manual Transmission (MT): Also known as manual gearbox, it requires manually shifting the gear lever to change the gear meshing device inside the transmission, altering the gear ratio to achieve speed variation. 2. Composition: The manual transmission mainly consists of gears and shafts, achieving speed and torque variation through different gear combinations. The principle of manual transmission cars is as follows: 1. Speed and Torque Variation: The pump wheel and turbine form a working pair, similar to two fans placed opposite each other. The wind blown by one fan drives the blades of the other, with wind serving as the medium for kinetic energy transfer. If liquid replaces air as the medium, the pump wheel drives the turbine to rotate via the liquid. Adding a guide wheel between the pump wheel and turbine creates a speed difference through reaction force, enabling speed and torque variation. 2. Manual Gear Lever: Marked P (Park), R (Reverse), N (Neutral), D (Drive), with additional "2" and "1" gears in the drive position for starting or climbing slopes.
10
3
Share

Which warning light indicates an abnormality or malfunction in the engine control system?

The engine check light indicates an abnormality or malfunction in the engine control system. Here is some information about the engine check light: 1. Car engine check light: The meaning when the light is on is an indicator of the engine's working condition. It lights up when the ignition is turned on and goes off after about 3-4 seconds if the engine is normal. 2. Function: It is used to alert the driver whether there is a fault in the engine, and a self-check is performed every time the vehicle is started. The reasons for the engine check light to illuminate are as follows: 1. Sensor issues: Including water temperature, crankshaft position, air flow, intake temperature, oxygen sensor, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine check light to illuminate. 2. Maintenance issues: Poor engine maintenance is the most common cause of the engine check light illuminating. 3. Poor combustion of the air-fuel mixture: Faults in the engine's spark plugs, ignition coils, fuel pump, or clogged fuel lines can all cause poor combustion of the air-fuel mixture. Poor combustion leads to engine carbon buildup or knocking problems, which are eventually detected by the oxygen sensor in the exhaust system. After reporting to the ECU, the engine check light will illuminate as a warning.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.