Does a car tire pressure of 225kpa need inflation?

2 Answers
Cook
07/29/25 6:45am
A car tire pressure of 225kpa does not require inflation. The tire pressure range for cars is relatively wide, and 225KPA falls within the normal range. The recommended tire pressure for car tires typically ranges between 2.1-2.9bar. For cold tires, the ideal pressure depends on the season: in winter, inflate to 2.5bar, while in summer, 2.3bar is sufficient for cold tires. Standard tire pressure for different types of tires: Standard tires should be 2.4-2.5bar; reinforced tires should be 2.8-2.9bar; the maximum pressure should not exceed 3.5bar. Normal winter tire pressure: In winter, adjust the tire pressure based on the standard tire pressure, increasing it by approximately 0.2bar. Normal summer tire pressure: Generally, the lower limit of the standard tire pressure is suitable. For example, the lower limit for standard tires is 2.4bar. If the car is often parked outdoors, the tire pressure can be slightly lower than the standard by about 0.1bar to prevent blowouts due to high temperatures.
Was this review help?
2
5
Share
CooperAnn
08/12/25 10:08am
Having driven for over 30 years, I think a tire pressure of 225kPa is on the lower side of medium. The recommended tire pressure for normal sedans is around 220-250kPa, so it might not require immediate inflation, but it depends on the vehicle model and weather. For example, in summer, due to thermal expansion, higher tire pressure is fine; in winter or before long trips, this value might be insufficient, so I recommend checking the standard value on the door frame label first. From my own experience, low tire pressure increases fuel consumption, accelerates tire wear, and affects braking safety. Last time my car had a tire pressure of 210kPa, fuel consumption surged by 15%, which was totally not worth it. Just check regularly, buy a tire pressure gauge to measure, and if necessary, it's easy to fix at a gas station. Safety first, don't underestimate this small issue.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

What are the reasons why a car always runs out of battery?

The reasons why a car always runs out of battery are: 1. The car has been left unused for a long time, during which the battery self-discharges; 2. The electrical appliances inside the car were not turned off during use, resulting in prolonged discharge; 3. The car battery has aged. The functions of the battery are: 1. When starting the engine, the battery supplies power to the starting system, ignition system, and electronic fuel injection system; 2. When the engine stops running or is at low idle, it powers the car's electrical equipment; 3. When the generator's output is insufficient, it can assist in supplying power to the electrical equipment; 4. It mitigates voltage surges in the electrical system, protecting the car's electronic devices; 5. It can store excess electricity generated by the alternator.
10
3
Share

How many kilometers can a car run after the gasoline gauge light comes on?

When the car's gasoline gauge light comes on, it can still run for 40 to 60 kilometers. The function of the fuel gauge is to display the fuel level in the car's fuel tank. The fuel gauge consists of a voltage regulator, a fuel indicator, and a fuel level sensor. The low fuel level warning device is designed to illuminate immediately when the fuel in the tank falls below a specified level, alerting the driver to take notice. Precautions for using the fuel gauge include: 1. Do not wait until the warning light comes on to refuel; too little fuel is detrimental to the normal operation of the fuel pump and can reduce its service life. 2. Indication deviation: When replacing the battery or fuel filter, the fuel gauge pointer may show a lower level than before after restarting the vehicle. This is due to pressure release after opening the fuel tank, causing the fuel level to drop, and such display deviation is a normal phenomenon.
3
3
Share

How to Check the China Emission Standard of a Vehicle?

Methods to check the China emission standard of a vehicle are: 1. Check the vehicle's environmental protection label; 2. Bring the original or a copy of the vehicle registration certificate to the vehicle management office for inquiry; 3. Check the vehicle's factory certificate of conformity; 4. Log in to the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center for inquiry; 5. Make a rough distinction based on the year the vehicle was registered. The China emission standard refers to the national standard for motor vehicle pollutant emissions, which regulates the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulates, and carbon smoke emitted from vehicle exhaust. The standards are divided into China I, China II, China III, China IV, China V, and China VI.
18
0
Share

What to Do If Your Car is Filled with Poor-Quality Gasoline?

If your car is filled with poor-quality gasoline, the following steps should be taken: 1. Replace the gasoline filter and clean the fuel injectors promptly; 2. Clean the inside of the cylinders; 3. Clean the three-way catalytic converter; 4. Clean the fuel tank and fuel lines; 5. Replace the fuel filter; 6. Add high-quality gasoline and clean the throttle valve carbon deposits. Using poor-quality gasoline can lead to poor driving performance and vehicle accidents. Symptoms of a car running on poor-quality gasoline include: 1. Difficulty starting the engine; 2. Engine shaking at idle after starting; 3. Noticeable vibration in the car body; 4. Unpleasant smell from the exhaust gases; 5. Weak acceleration and increased fuel consumption.
8
2
Share

What Causes the Car Engine Yellow Light to Stay On?

Car engine yellow light staying on is caused by: 1. Poor gasoline quality leading to incomplete combustion of the air-fuel mixture in the cylinder, resulting in carbon deposits; 2. Excessive engine mileage causing weakened spark plug performance; 3. Vehicle mechanical aging or damage; 4. Sensor or computer board failure. Solutions for a car engine yellow light staying on include: 1. Cleaning engine carbon deposits; 2. Replacing with qualified fuel; 3. Conducting a comprehensive vehicle inspection and repair. Engine maintenance methods are: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning radiator scale; 4. Regularly cleaning engine carbon deposits; 5. Regularly replacing the car's three filters; 6. Maintaining reasonable engine speed.
20
3
Share

What does SN grade mean for motor oil?

Motor oil SN grade refers to the quality classification of engine oil. The oil grades include: SG, SJ, SL, SM, and their functions are: 1. To reduce friction and high temperatures; 2. To cool and lower temperatures; 3. To clean and remove impurities; 4. To absorb shocks and cushion impacts; 5. To prevent rust and corrosion. Engine oil, also known as motor lubricant, is composed of base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve any deficiencies in the base oil's performance. The method for changing car engine oil is: 1. Use a jack to lift the vehicle, locate and unscrew the drain plug to release the oil; 2. After removing the oil filter, place a container beneath it; 3. Replace with a new oil filter and add new engine oil.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.