···
Log in / Register

Does a car purchased in 2013 require annual inspection in 2021?

5 Answers
DelSimon
07/29/2025, 12:01 PM

A car purchased in 2013 does not require annual inspection in 2021. According to the new regulations, vehicles within 10 years only need biennial inspection. Only vehicles inspected after the implementation of the new annual inspection policy on November 20, 2020, can obtain a motor vehicle inspection certificate valid for two years as stipulated. The new inspection rules include 7 to 9-seater non-operational small and micro passenger vehicles (excluding minivans) within 6 years in the exemption range. Relevant information about vehicle annual inspection is as follows: 1. Introduction: Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate, equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." 2. Function: Vehicle annual inspection can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents.

Was this review help?
4
5
Share
JasonDella
08/15/2025, 12:11 AM

I have some experience to share with you. My 2014 car just had its annual inspection last year, so a 2013 car would definitely need one by 2021. The new policy now states that for the first 6 years after a new car is registered, you only need to collect a sticker every 2 years without an on-site inspection. However, after 6 years, you must go to the inspection station for an annual on-site check. You do the math—from 2013 to 2021 is already 8 years, well past the 6-year threshold, meaning it requires an annual inspection. Otherwise, if caught driving without it, you could face fines or even have your car impounded. I recommend checking the DMV’s appointment schedule in advance and bringing your vehicle license, ID card, and insurance policy to avoid long queues. Don’t forget that the annual inspection isn’t just a formality—it helps identify issues like brake or lighting problems, which are crucial for safe driving. Don’t wait until it’s overdue to rush through it; if something goes wrong, regret won’t help.

Was this review help?
12
5
Share
Expand All
StephenFitz
10/12/2025, 01:20 AM

As a car enthusiast, I know the regulations for annual vehicle inspections are very clear. A car produced in 2013 definitely requires an annual inspection by 2021. According to traffic laws, vehicles need to undergo on-site testing every year starting from the 6th year. With 2021 minus 2013 being 8 years, it far exceeds the 6-year threshold, so an annual inspection is mandatory. The inspection includes checking lights, brakes, exhaust emissions, etc., to ensure the vehicle meets safety standards. Neglecting it could pose safety risks. Nowadays, inspection stations are equipped with professional devices like axle weight testers or exhaust gas analyzers, making the process quite fast. Just prepare your documents and make a trip. Don't miss the inspection deadline—driving with an expired inspection carries significant risks and may even affect your insurance. Set aside a weekend to get it done.

Was this review help?
15
0
Share
Expand All
Antonio
11/25/2025, 01:22 AM

My car is a 2011 model, and it passed the annual inspection on time last year in 2021. If yours is a 2013 model, it also needs to be inspected every year in 2021. The new policy states that new cars are exempt from on-site inspections for the first 6 years, with inspections required every 2 years, and then annually thereafter. I usually set calendar reminders to submit the materials early at the inspection station to avoid delays, as the queues can be time-consuming. The annual inspection checks whether the lights are working and if the brakes are responsive, which is crucial.

Was this review help?
20
4
Share
Expand All
GriffinRose
01/15/2026, 02:54 AM

I checked my car's annual inspection status using a mobile app. For a 2013 model year car, it must undergo annual inspection by 2021. Since the vehicle is 8 years old, exceeding the 6-year threshold, it requires an on-site inspection every year. Bring the vehicle registration certificate and ID card to the inspection station. Nowadays, some locations allow online appointments to save time. With an older car, it's important to pay attention to safety and get it inspected on time to avoid issues.

Was this review help?
8
0
Share
Expand All
More Forum Discussions

What is the valve clearance for Iveco?

Iveco gasoline engine valve clearance: intake 25 30 thousandths of an inch; exhaust 35 40 thousandths of an inch. The following is a related introduction about valves: 1. Function: The function of the valve is to specifically input air into the engine and discharge the exhaust gas after combustion. From the perspective of engine structure, it is divided into intake valves and exhaust valves. The function of the intake valve is to draw air into the engine and mix it with fuel for combustion; the function of the exhaust valve is to discharge the exhaust gas after combustion and dissipate heat. 2. Working conditions: The working conditions of the valve are very harsh. First, the valve is in direct contact with high-temperature gas, which causes severe heating and makes heat dissipation difficult, resulting in very high valve temperatures. Second, the valve is subjected to gas force and valve spring force, as well as the impact caused by the inertia force of the moving parts of the valve train when the valve seats. Third, the valve opens and closes at extremely high speeds and moves at high speed in the valve guide under poor lubrication conditions.
5
3
Share

How many kilometers should the timing belt of an Iveco be replaced?

The replacement cycle for a car's engine timing belt is approximately 70,000 to 100,000 kilometers. Here is some information about the timing belt: 1. Definition: The timing belt is an important component of the engine's valve system. It connects to the crankshaft and works with a specific transmission ratio to ensure the accuracy of intake and exhaust timing. 2. Purpose: The timing belt plays a connecting role. The upper part connects to the timing wheel of the engine cylinder head, and the lower part connects to the timing wheel of the crankshaft. The timing wheel is connected to the camshaft, which has cams. The contact point is the small rocker arm, and the rocker arm generates pressure through the power brought by the timing belt, serving a lifting function.
2
3
Share

What is the fuel consumption of the Infiniti QX56?

The fuel consumption of this vehicle is 18L/100km. Below is relevant information about this model: 1. Vehicle Positioning: The QX56 is a full-size luxury SUV under the Nissan brand, serving as an upgraded version of the "Pathfinder-Armada". The QX56 made its debut at the 2004 Detroit Auto Show and went on sale in the spring of that year. The design and production of the QX56 are entirely conducted in the United States, manufactured in Mississippi, giving it a pure American pedigree. 2. Powertrain: In terms of power, the 2011 QX56 is equipped with a 5.6L V8 engine, model VK56, which has been recalibrated based on the older model. The current model delivers a maximum power of 324/5800 (Kw/rpm) and a maximum torque of 555 Nm, which is achieved when the engine speed reaches 4000 rpm.
12
0
Share

How Many Liters of Transmission Fluid Does the Excelle Need?

The Buick Excelle automatic transmission has a capacity of 8.2L, but typically only 4L is needed during a fluid change. Below are the specific functions of automotive transmission fluid: 1. Improved shifting performance: Ensures smooth and seamless gear changes, enhancing driving control. 2. Reduced corrosion: Provides excellent oxidation resistance, minimizing component rust. 3. Extended lifespan: High-quality extreme pressure additives offer optimal protection for gear sets, delivering superior wear resistance and prolonging automatic transmission life. When changing transmission fluid, always opt for premium brand transmission oil to effectively protect gears, reduce wear, enhance vehicle performance, improve fuel efficiency, extend fluid service life, and lower maintenance costs.
8
4
Share

What is the reason why the Infiniti airbag light cannot be turned off?

An airbag generally consists of sensors, a microprocessor, an electronic control unit, an airbag cover and support ring, the airbag itself, and an airbag module. The reason the airbag light is on may be due to damage in one of these components. Here is some relevant information: 1. Introduction: The electronic airbag system is a passive safety protection system (see vehicle safety performance) that, when used in conjunction with seat belts, provides effective collision protection for occupants. In the event of a car collision, airbags can reduce head injuries by 25% and facial injuries by approximately 80%. 2. History: The airbag was first proposed by Hetrick in August 1953 and was granted a U.S. patent for an "automobile safety cushion assembly." With the establishment of vehicle safety standards in various countries, the installation rate of airbags has increased significantly. In Europe, the U.S., Japan, and other countries, the installation rate of airbags in vehicles has reached nearly 100%.
12
0
Share

What are the items of car maintenance?

Car maintenance items are as follows: 1. Mechanical repair: Repair various mechanical faults of the car, including the engine, gearbox, chassis suspension system, and oil circuit. 2. Four-wheel alignment: Based on the four-wheel parameters of the vehicle, adjustments are made to ensure good driving performance and certain reliability. 3. Sheet metal painting: Sheet metal painting is a car repair technique that involves repairing the deformed parts of the car's metal shell. 4. Car beauty: According to the maintenance conditions required by different materials of various parts of the car, different car beauty care products and construction processes are used to maintain and care for the car. 5. Car maintenance: Regularly inspect, clean, supply, lubricate, adjust or replace certain parts of the car for preventive work.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.