Does a car need to undergo an inspection in its 8th year?

2 Answers
VanWalter
07/24/25 6:34am
Cars in their 8th year are required to undergo an inspection according to regulations. New cars within the first 6 years can be exempt from inspection twice (requiring only the application for an inspection mark every two years without the need for an on-site vehicle inspection). However, in the 6th and 8th years, the vehicle must be inspected on the testing line. For private cars over 10 years old, the original inspection cycle still applies: once a year for cars aged 10 to 15 years, and once every six months for cars over 15 years old. Vehicle owners can apply for an inspection compliance mark at the local vehicle management office within three months before the expiration of the current inspection period. Notes for on-site inspection: When testing the side slip of the front wheels, ensure the vehicle passes the side slip platform smoothly at a speed of 5 kilometers per hour. Excessive speed will prevent obtaining accurate test results, while too slow a speed may cause the vehicle to stall or stop. During the lighting test, it's also necessary to control the distance between the vehicle and the lighting instrument and ensure the vehicle is directly facing the equipment. Penalties for failing the annual inspection: Driving a motor vehicle on the road without displaying an inspection compliance mark will result in the vehicle being impounded and a deduction of 1 point. Failing to purchase compulsory traffic insurance will result in a penalty of twice the amount of the insurance premium.
Was this review help?
3
5
Share
DiBrynlee
08/11/25 2:18am
I just bought a new car and will have to face inspection issues in a few years. Cars are exempt from on-site inspections for the first 5 years, but by the 8th year, they must definitely go to the inspection station for an on-site check. Last time I went for the 8th-year inspection, it was quite troublesome—I waited in line for a long time to get the emissions, brakes, and safety systems tested. According to regulations, new cars are exempt from on-site inspections in the 6th year but still need to complete paperwork. Between the 6th and 10th years, inspections are required every two years, including the 8th and 10th years. Skipping inspections could lead to fines and penalty points if caught by traffic police, not to mention safety risks. My car tends to develop minor issues as it ages, so getting maintenance done in advance can prevent many risks. I recommend that car owners book inspection appointments early and bring their vehicle license and insurance policy to avoid wasted trips. Before the inspection, make sure the lights and brakes are functioning properly—spending a little money for peace of mind makes driving much more reassuring. In short, the 8th-year on-site inspection is mandatory—don’t delay and risk complications.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

Has the Honda Fit met the China VI emission standard?

New Honda Fit does not comply with the China VI standard. Under the dual pressures of a sluggish market and the China VI emission standard in this year's Chinese automotive market, many automakers, whether joint ventures or domestic brands, have experienced significant sales declines. Despite the overall downturn, the top three Japanese companies—Toyota, Honda, and Nissan—have maintained robust sales performance. Particularly for Toyota and Honda, despite minimal discounts across their product lines, sales have continued to grow. In response, Toyota and Honda have swiftly introduced China VI-compliant versions of their best-selling models in China. The engine is paired with either a 5-speed manual transmission or a CVT transmission. Most Japanese automatic transmission vehicles utilize CVT, also known as continuously variable transmission.
18
0
Share

How Many Years Are New Motorcycles Exempt from Inspection?

On July 1, 2019, motorcycles officially implemented the same inspection exemption policy as cars, allowing motorcycles to enjoy a 6-year exemption from inspection. For vehicles registered after June 1, 2017, the policy allows for three exemptions from inspection; for those registered between June 1, 2015, and May 31, 2017, since they have already been inspected once, the policy allows for two exemptions from inspection; for those registered between June 1, 2014, and May 31, 2015, since they have already been inspected twice, the policy allows for one exemption from inspection; for motorcycles registered before May 31, 2014, they are still required to undergo inspection at inspection agencies according to the original regulations, once a year. Motorcycles that have already reached the status of overdue inspection are subject to the new regulations.
11
0
Share

What is the braking distance from 40 km/h to a complete stop?

Under normal circumstances, the braking distance from 40 km/h to a complete stop for an unladen vehicle is approximately 45 meters. Here is some relevant information about automotive braking: 1. Braking Overview: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of a moving locomotive, vehicle, or other transportation equipment or machinery. 2. Working Principle: The general principle of braking is to fix a wheel or disc on the high-speed shaft of the machine and install corresponding brake shoes, bands, or discs on the machine base, which generate braking torque under external force. The braking device is a mechanical deceleration device that can slow down the vehicle's speed, also known as a retarder.
8
3
Share

Why does the system report lane crossing when I didn't actually cross the line in Subject 3 test?

If there is indeed a misjudgment, you can explain it to the instructor and the examiner on the spot. The test center has surveillance video that can be reviewed. Relevant explanations are as follows: 1. Do not ride on dashed lines: It is strictly prohibited to ride on road dividing lines. Even dashed lines are considered lane crossing. Driving while riding on lane dividing lines for an extended period will result in an immediate 100-point deduction. 2. Reasonable speed: In the Subject 3 test, you must also avoid riding on solid center lines or solid edge lines of the lane. Many trainees deliberately slow down due to concerns about not driving in a straight line, which is not advisable. This may actually increase the likelihood of the vehicle's trajectory deviating, so you should maintain a reasonable and steady speed.
3
5
Share

What are the penalty rules for gear shifting in Subject 3?

In the Subject 3 exam, the penalty items related to gear shifting include: 1. Wrong gear selection: Starting or driving with the wrong gear and failing to correct it in time, deduct 10 points. 2. Gear-speed mismatch: Prolonged mismatch between gear and speed, causing the engine speed to be too high or too low, deduct 100 points. 3. Looking down at the gear: Looking down at the gear while driving or failing to engage the gear twice in a row, deduct 100 points. 4. Gear collision: Gear collision during shifting, deduct 10 points. 5. Unstable shifting: Failing to smoothly shift gears as instructed, deduct 100 points. 6. Speed-gear mismatch: Mismatch between vehicle speed and gear, deduct 10 points.
8
5
Share

What gear should be used for lane changing in Subject 3?

Introduction to gear selection for lane changing is as follows: 1. Left lane changing: After the voice prompt for overtaking or left lane changing, you can use 3rd gear or higher to change lanes. Generally, 3rd gear is suitable for speeds of 20-40km/h, 4th gear for 40-60km/h, and 5th gear for speeds above 60km/h. Additionally, gear selection should be reasonably adjusted according to the speed requirements of the left lane. For example, if the left lane requires a speed of 40-60km/h, you can use 4th gear for the lane change. 2. Right lane changing: When changing to the right lane, you can first maintain the current gear and slowly merge into the right lane. After fully entering the lane, you can downshift by one gear.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.