Does a Car Get Affected If Left Unused for a Long Time?

How to Refund Tesla's Deposit?

Tesla's deposit refund can be directly applied for on the official website. Here is more information: 1. Tesla's deposit refund conditions. Tesla's official website states that only refunds before selecting vehicle configurations and confirming the order are eligible for a full refund. Tesla's vehicle purchase deposit must be used to pick up the car within 180 days; otherwise, it will be treated as a penalty and forfeited. 2. Tesla's new sales policy. Tesla's China official website has changed the rules for the initial order (deposit), reducing the original amount and making it non-refundable and non-transferable. Additionally, Tesla has adjusted the reservation policy for all its models. Previously, the paid deposit was refundable, but under the new policy, the deposit can only be refunded if certain conditions are met.

9

5

Share

How to Check the Manufacturing Date of Truck Tires?

The production batch number of the tire is located on the outer edge of the tire. It consists of a set of numbers and letters indicating the manufacturing date and quantity of the tire. Here are the necessary situations for tire replacement: 1. Approaching the expiration date: Every tire has a production date. It's important to be aware of your tire's service life and mileage. Beyond this period or mileage, the tire's wear will become more severe, making it unable to support the vehicle effectively. Therefore, it's crucial to keep track of your vehicle's tire production dates to avoid potential issues. 2. Severe tread wear: Checking the tire tread is one of the most intuitive ways to determine the condition of a tire. As friction time increases, the depth of the tread will decrease with changes in friction. When the tread depth reaches 3mm, it may be a sign that it's time to replace the tires, and this should not be ignored.

1

5

Share

What Causes Black Smoke from a Motorcycle Exhaust Pipe?

The reason for black smoke from a motorcycle exhaust pipe is related to issues with the carburetor, spark plug, and ignition timing. Below are specific explanations: 1. Carburetor: The carburetor can cause black smoke from the exhaust pipe. The problem with the carburetor is that the air-fuel mixture is too rich. This occurs because the idle jet and main jet of the carburetor accumulate impurities over prolonged use, leading to an overly rich mixture. 2. Spark Plug: Many motorcycle problems can be linked to the spark plug. The combustion condition of the spark plug best reflects the engine's working state. Therefore, apart from the above issues, weak sparking or excessive carbon buildup on the spark plug can also cause black smoke from the motorcycle. 3. Ignition Timing: If the motorcycle's ignition timing is too late, the combustible mixture will not burn completely, resulting in excess mixture entering the muffler and producing black smoke and backfiring. The delay in ignition timing is usually caused by aging electronic components in the ignition system or a loose timing chain, which can cause the timing gear to skip teeth, ultimately leading to delayed ignition timing.

2

1

Share

Can You Make a U-Turn with Only a Left-Turn Arrow?

As long as there is no no U-turn sign or a separate U-turn signal, and only a left-turn arrow is present, motor vehicles can make a U-turn without affecting normal traffic flow and ensuring safety. Typically, the central median on general roads changes from a solid line to a dashed line near intersections, allowing vehicles to make a U-turn in this area. Situations where U-turns require observing traffic signals: If there is a U-turn signal at the intersection, you must wait for the U-turn green light to proceed. If there is no no U-turn sign at the intersection and there is a crosswalk, you must wait for the left-turn signal to turn green and cross the stop line before making a U-turn. If the road centerline is solid or blocked by barriers like railings and there is no dedicated U-turn lane, you must wait for the left-turn signal to turn green before proceeding. Situations where U-turns do not require observing traffic signals: If there is a single-sided yellow dashed line at the intersection, placed before the stop line, you can make a U-turn at the dashed line without waiting for the signal. It is important not to obstruct normal traffic flow during the U-turn. If there are barriers like railings with a dedicated U-turn lane before the intersection, you also do not need to wait for the signal. If there is a U-turn sign at the intersection with accompanying text indicating that no signal is required, you can make a U-turn directly at the intersection.

20

4

Share

What Causes Temporary Steering Wheel Lock After Driving Through Water?

After driving through water, the steering wheel may temporarily lock up, likely due to water ingress causing short-term electrical failure, poor contact, or short circuits. When encountering accumulated water, drivers should stop to observe, especially on unfamiliar roads. Assess the water depth by observing other vehicles' passage. If confident the vehicle can pass, maintain steady throttle and drive at a low gear with constant speed. If passage seems impossible, detour to avoid waterlogged or potholed sections. Main causes of steering wheel lock: 1. Insufficient tire pressure in steering wheels affecting maneuverability - inflate to specified levels; 2. Incorrect steering wheel alignment or axle/frame deformation causing misalignment - rectify axle/frame and perform four-wheel alignment; 3. Overly tight adjustment of steering gear's active bearing or excessive tightness between driven part and bushing; 4. Excessive small clearance adjustment in steering gear's meshing parts; 5. Lack of lubrication in steering gear - replenish oil as specified; 6. Deformed steering gear housing - correct promptly; 7. Bent steering column/shaft or dented sleeve causing friction; 8. Over-tightened or insufficiently lubricated steering rod/tie rod ball joints - adjust or add grease; 9. Excessive tightness or lack of lubrication in kingpin/bushing, or insufficient lubrication in steering knuckle thrust bearing - adjust or lubricate accordingly.

17

3

Share

What is the ground clearance of the GL8?

GL8 empty chassis is 160mm, the minimum ground clearance of the old model is 144mm, and the new model is 147mm. The following is the relevant introduction of the GL8's minimum ground clearance: 1. Minimum ground clearance: Chassis height (i.e., minimum ground clearance), which defines the vertical distance from the car's bottom to the ground when the car is fully loaded. The chassis height directly affects the car's passability. In the previous standard, there was a regulation on the minimum ground clearance, which should not be less than 150mm, but this standard has been canceled. 2. Introduction of GL8: The performance of the Buick GL8 in terms of chassis is average, and the suspension adopts the structure of front MacPherson independent suspension + rear torsion beam non-independent suspension. Both the old and new GL8 models use MacPherson structure, and the main components are made of steel, and the steering knuckle is made of aluminum alloy. The new generation of GL8 uses hydraulic bushing connection on the lower control arm, which further improves comfort.

9

3

Share

Does a Car Get Affected If Left Unused for a Long Time?

How to Refund Tesla's Deposit?

How to Check the Manufacturing Date of Truck Tires?

What Causes Black Smoke from a Motorcycle Exhaust Pipe?

Can You Make a U-Turn with Only a Left-Turn Arrow?

What Causes Temporary Steering Wheel Lock After Driving Through Water?

What is the ground clearance of the GL8?

What is the Difference Between BMW and BMW Brilliance?

What causes the windshield washer to spray water but not move?

Should the valve stem be replaced when installing new tires?

What is an Electronic Central Locking System?