Does a black roof wrap require registration?

1 Answers
DelIvan
07/29/25 3:25pm
For applying a black wrap on the car roof, as long as the area does not exceed 30%, it will not be fined by traffic police. If it exceeds 30%, you need to go to the vehicle management office to register and change the driving license. Otherwise, if you are checked by traffic police on the road and the body color does not match the photo in the driving license, it is considered illegal and will result in penalties such as point deduction, vehicle seizure, and fines. Additional information is as follows: 1. Vehicle wrapping: For changing the color of a vehicle through wrapping, after the color change, the vehicle owner or agent needs to carry the required certificates and invoice, and drive the color-changed vehicle to the vehicle management office to undergo inspection procedures. The staff at the vehicle management office will re-enter the changed body color, take new photos, and complete the registration change procedures. 2. Registration: It is now allowed for vehicle owners to change the color first and then go to the vehicle management office for registration. Of course, this registration cannot be done at any time the owner wishes. The traffic management department has clear regulations on the registration time limit. Vehicle owners should go to the local vehicle management office to complete the change registration within ten days after the vehicle color change.
Was this review help?
4
3
Share
More Forum Discussions

How Long Does It Take to Receive a Red Light Violation Notice?

After running a red light, the violation notification SMS is usually received within 3 to 7 days, with the latest being around 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive an SMS notification within 5-10 minutes of being captured. However, the notification does not equate to a violation; it merely serves as a capture alert. Whether it is ultimately deemed a violation will take 3-7 days to confirm. If it is indeed a violation, you will receive another SMS notification. For traffic violations captured by surveillance cameras, vehicle owners generally do not receive the violation SMS immediately. There is a delay, and the duration may vary. This is because after the electronic camera captures the violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center, where it is compiled and then verified by the relevant traffic police department staff. Once confirmed as a violation, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via SMS. After receiving the violation SMS, the vehicle owner must go to the traffic police department where the violation occurred to handle the matter within one month before the vehicle's annual inspection. Generally, if a vehicle owner suspects a violation, they can use 15 days as a benchmark. If no violation SMS is received after 15 days, it is likely that no violation was recorded. Traffic Violation Query Methods: Traffic violation queries refer to checking motor vehicle traffic management violations via the internet or query terminals. There are five ways to query traffic violations: traffic branch terminal queries, traffic violation website queries, phone queries, SMS queries, and mobile app queries. Website Query: Search for "vehicle violation query" and enter vehicle information to check. Phone Query: Call local 114 (area code + 114) or 12580 to confirm traffic violations. Violations can only be processed at the location of the violation or the vehicle's license plate issuance location. For on-the-spot violations, such as those directly caught by traffic police, they must be handled at the violation location. SMS Query: Open the SMS interface on your phone, type "WZ [license plate number] [plate color]," send it to 1062650001, and click send. Mobile App Query: Open the "Traffic Management 12123" app, select "Violation Query," and clear any unresolved violations.
4
2
Share

What Causes Engine Shaking When Cold?

Engine shaking during cold starts occurs due to incomplete combustion in the cylinders, resulting in insufficient vehicle power output, which leads to vibration. Below are additional details: 1. Before each engine start, keep the ignition key turned for about 3 seconds to allow the PP electronic throttle to perform adaptive learning while enabling the fuel system to build up oil pressure before engine ignition. This practice not only facilitates smoother engine starts but also reduces occurrences of EPC light illumination and idle shaking caused by a dirty throttle. 2. The coolant temperature sensor is one of the critical parameters for the ECU to determine engine operating conditions. If the engine cold-starts at -10°C but the sensor reports "20°C" to the ECU, the system will inject fuel based on 20°C conditions, leading to lean mixture and inevitable shaking.
10
0
Share

How long does it take for traffic violations to appear online?

Generally, traffic violations can be checked within 3-7 days after they occur, with a maximum delay of no more than 13 working days. Currently, there are 7 methods to check violations: 1. Visit the service halls of traffic police branches in various districts and counties to use touch-screen terminals for inquiries. 2. Log in to the official websites of municipal public security traffic management bureaus, locate the vehicle violation query section, enter the license plate number and vehicle engine number, then click to search. 3. Call 114 for telephone inquiries. 4. Send SMS messages from mobile phones to check violations. 5. Use traffic violation query tools by entering license plate information. 6. Visit the official website of Wanche Toutiao, input the license plate number and the last 4 digits of the engine number or the last 6 digits of the VIN to query.
3
5
Share

Why doesn't the windshield wiper spray water?

The reasons why the windshield wiper does not spray water are as follows: 1. Check if the windshield washer fluid is depleted or frozen in winter, preventing the pump from drawing it up. 2. Determine if there is any sound from the pump when activating the spray handle (switch). If not, the spray motor may be faulty or its fuse may have blown. 3. If there is sound from the washer fluid and pump, you can open the engine hood to check if the washer fluid supply hose is leaking. 4. Inspect if the spray nozzles near the wipers are clogged. If they are, clean them immediately. 5. Frequent activation of the washer fluid spray may overload and damage the pump, preventing it from working properly.
5
2
Share

How to Determine if Brake Pads Need Replacement?

Here are the methods to determine whether the brake pads need replacement: 1. Check the thickness of the brake pads. The maximum wear limit for brake discs is 2mm, and it is necessary to replace the new brake disc after reaching the limit. However, in actual use, most car owners do not strictly follow this standard. If the replacement frequency of the brake pads is high, it is necessary to check the thickness of the brake discs more often, because the use of the brake pads and the wear of the brake discs are relative, so the brake discs should be checked regularly. 2. Listen for sounds. If there is a "metal-to-metal" squealing sound when lightly braking, the brake pads must be replaced immediately. This is because the wear indicators on both sides of the brake pads are already directly rubbing against the brake disc, indicating that the brake pads have exceeded their limit. In such cases, while replacing the brake pads, the brake discs should also be checked, as the discs may already be damaged. At this point, even replacing the new brake pads may not eliminate the noise, and in severe cases, the brake discs may need to be replaced. 3. Brake travel and pedal feel. When the brake pads become thin, the braking travel will change, the braking response will become sluggish, and the braking force will weaken, giving a feeling of inadequate braking. This indicates that you need to check the brakes. Additionally, the brake fluid should also be checked here, as it needs to be replaced regularly to maintain performance.
3
4
Share

Where is the license plate with 'Ji' from?

Ji is the license plate code for Jilin Province. Specifically: Ji A - Changchun City (provincial capital), Ji B - Jilin City, Ji C - Siping City, Ji D - Liaoyuan City, Ji E - Tonghua City, Ji F - Baishan City, Ji G - Baicheng City, Ji H - Yanbian Korean Autonomous Prefecture, Ji J - Songyuan City. Here is some additional information about license plates: 1. License plates serve as identification numbers and registration records for vehicles. Their primary function is to indicate the vehicle's registered region and allow authorities to trace the vehicle's owner and registration details. 2. There are two types of license plates: temporary and permanent. Permanent plates are generally valid for the vehicle's entire lifespan, while temporary plates are valid for 5 to 15 days, with a maximum validity of 30 days.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.