Does a 6-year-old car need to undergo on-site inspection?

1 Answers
LeErin
07/30/25 6:34am
For a 6-year-old car, on-site inspection is required. The vehicle must strictly follow the annual inspection procedures, and the annual inspection compliance label will only be issued after passing the inspection. Vehicles that meet the 6-year exemption conditions are exempt from the on-site inspection (i.e., vehicle testing) within the first six years, but they still need to apply for the annual inspection compliance label (i.e., the label affixed to the windshield) every two years. The materials required for the on-site inspection include: the original vehicle license (including both the original and duplicate copies), a valid compulsory traffic insurance policy (duplicate copy), and if the compulsory insurance policy does not include the vehicle and vessel tax, the original invoice for the vehicle and vessel tax must also be provided.
Was this review help?
4
4
Share
More Forum Discussions

What transmission does the Volkswagen Golf 1.6 have?

Volkswagen Golf 1.6 is equipped with a 6-speed AT transmission. Golf transmission options: 5-speed manual, 6-speed automatic manual transmission, 7-speed dry and wet dual-clutch transmissions. Depending on the configuration, the Volkswagen Golf (2018 model) offers four transmission options: 5-speed manual, 6-speed automatic manual transmission, and 7-speed dry and wet dual-clutch transmissions. Dual-clutch transmission: The Golf GTI model is paired with a 7-speed wet dual-clutch transmission, equipped with a 2.0T turbocharged engine. The 1.4T model is matched with a 7-speed dry dual-clutch transmission and a 5-speed manual transmission. The 1.2T model comes with a 7-speed dry dual-clutch, while the 1.6L model is paired with a 5-speed manual and a 6-speed automatic manual transmission.
10
2
Share

Can the BMW 3 Series GT trunk be opened with a foot sweep?

BMW 3 Series GT trunk can be opened with a foot sweep. Induction Electric Trunk: The kick-activated electric trunk, also known as the induction electric trunk, allows the trunk to be opened without using hands by sensing the movement. The principle of the kick-activated electric trunk is based on analyzing the signal changes from two antennas installed at different positions, thereby activating the electric trunk switch. Sensor Recognition: Antennas are placed at different positions inside the tailgate. When an object moves below the sensor, the antennas can identify a valid foot movement and thus activate the electric tailgate switch.
7
0
Share

How many kilometers should the transmission fluid be changed for Honda CR-V 1.5T?

Honda CR-V transmission fluid replacement intervals vary depending on the transmission type: automatic transmission fluid should be changed every 40,000 kilometers; manual transmission fluid should be changed every 60,000 kilometers. Transmission fluid replacement cycles: Manual transmission: Manual transmission fluid is generally recommended to be replaced every three years or approximately 100,000 kilometers; Automatic transmission: Automatic transmission fluid is generally recommended to be replaced every two years or approximately 40,000 kilometers; Continuously Variable Transmission (CVT): CVT fluid is generally recommended to be replaced every two years or approximately 60,000 kilometers. Transmission fluid replacement methods: Drain the fluid by loosening the drain plug at the bottom of the transmission and then refill; Remove the transmission oil pan directly for draining and refilling: This method is more thorough than the previous one, as it removes impurities from the bottom of the oil pan; Use a circulation machine to replace automatic transmission fluid: A smart circulation machine can perform dynamic fluid replacement, filtering and cleaning sludge and impurities inside the automatic transmission.
20
5
Share

Why does the Volkswagen Polo's idle speed fluctuate when the AC is on?

Volkswagen Polo's idle speed fluctuation when the AC is on is caused by factors such as air leakage in the intake system or low fuel pressure. Intake system air leakage: This fault directly affects the quality of the fuel-air mixture and combustion efficiency. Possible leakage points include the intake manifold, vacuum hoses, charcoal canister valve, exhaust gas recirculation (EGR) valve, positive crankcase ventilation (PCV) valve, etc., which need to be inspected one by one. Low fuel pressure: Mainly check whether components such as the fuel filter and fuel pump are clogged, or if the fuel lines are deformed.
13
0
Share

What is BMW's high-performance caliper?

BMW's blue calipers are used in the M Power series models, which are high-performance brake calipers. Brake Caliper: The brake caliper is an important component of the braking system, also known as the brake slave cylinder. The braking system is crucial for a vehicle as it affects driving stability and safety. The main components of the braking system include the vacuum booster, master cylinder, slave cylinder, brake pads, and brake discs. Brake Disc Replacement: Brake pads and discs are parts that require regular replacement. As the vehicle's mileage increases, the brake pads and discs will wear out. Once they are worn to a certain extent, they need to be replaced immediately. When the driver presses the brake pedal, the master cylinder uses brake fluid to push the slave cylinder, which then clamps the brake pads against the brake disc, allowing the vehicle to decelerate.
2
4
Share

Where is the coolant temperature sensor located on the BMW B48?

The coolant temperature sensor is installed near the cylinder head thermostat at the interface between the engine and the transmission. Sensor installation: The sensor is installed at the position where the circulating water in the engine returns to the radiator, allowing it to monitor the engine temperature. Vehicles are equipped with a thermostat, so the temperature is consistently maintained at 90 degrees, which is the optimal operating temperature for the engine. Sensor function: Most vehicles have two coolant temperature sensors: a single-wire sensor for the dashboard and a dual-wire sensor that provides data to the ECU to control the fuel injection system and cooling fan. Disconnecting the dual-wire sensor will cause the fan to run. The coolant temperature sensor is a negative temperature coefficient (NTC) thermistor, meaning its resistance decreases as the engine temperature rises and increases as the temperature drops.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.