Does a 2013 car need to go through the inspection line in 2019?

1 Answers
NolanRose
07/29/25 8:26pm
A 2013 car needs to go through the inspection line during the annual inspection in 2019. Here are some recommendations before the annual inspection: 1. Inspection items: Check the lighting system, braking system, exhaust emissions, chassis, and appearance. If any of these items fail the inspection, the annual inspection will not pass. 2. Repair before inspection: Fix any faults in advance to avoid unnecessary trouble. 3. Replace the old catalytic converter: Older cars often fail the exhaust emission test because certain sensors are damaged or the catalytic converter is no longer effective. A catalytic converter can lose effectiveness over time, causing the car to fail the exhaust emission test. 4. Maintenance before inspection: If the car hasn't been serviced for a long time, a pre-inspection maintenance check can help it pass the annual inspection smoothly. Regular maintenance is essential for daily car use.
Was this review help?
11
3
Share
More Forum Discussions

Should You Patch or Replace a Tire with a Nail Puncture?

Tire punctured by a nail requires assessment based on the location and extent of damage to determine whether patching or replacement is needed. If the nail only penetrates the tread area, the tire can be repaired and continue to be used. However, if the nail punctures the sidewall, it is recommended to directly replace the tire. Important note: Do not remove the nail immediately when encountering a punctured tire; drive to the nearest repair shop for professional handling. Additional information about car tires: 1. Tires are one of the most important components of a vehicle, directly contacting the road surface and working with the suspension system to absorb shocks during driving, ensuring good ride comfort and smooth operation. 2. They maintain excellent traction between wheels and road surface, improving vehicle traction, braking, and off-road capability while bearing the vehicle's weight. The crucial role of tires in automobiles has gained increasing attention.
9
3
Share

How to Steer the Driving Wheel?

The steering wheel operation mnemonic is as follows: 1. Left hand at 9 and 10 o'clock, right hand at 3 and 4 o'clock, thumbs placed on the inner upper side; 2. Avoid sudden pushing or pulling, left hand dominant with right hand assisting, both hands turn the wheel at the same angle; 3. Ease off the throttle and lightly brake before the turn, recenter the wheel and accelerate during the turn, look far ahead while monitoring nearby, foresight ensures safety. Steering wheel techniques are as follows: 1. Adopt a safe hand position on the wheel, with the left hand near the 9 o'clock position and the right hand near the 3 o'clock position. Hands should grip firmly yet remain relaxed. 2. On straight roads, use the 'correction method' for steering, which involves minor adjustments only when the vehicle deviates from the centerline, keeping each adjustment within 30 degrees for smooth driving. 3. For gentle curves, steer early and slowly, and return early and slowly; for sharp turns, steer late and quickly, and return early and quickly; develop anticipation skills by preparing hand movements before initiating the turn.
6
0
Share

Is Engine Valve Cover Oil Leakage Serious?

Engine valve cover oil leakage has significant impacts, as it can dirty the engine block, lead to poor engine cooling, reduce insulation of wiring, and in severe cases, may even damage the engine. The causes of engine valve cover oil leakage are as follows: 1. Uneven screw tightening during assembly, where excessive pressure can cause deformation of the engine valve cover leading to oil leakage; 2. Aging of the valve cover gasket. Solutions for an aging valve cover gasket include: 1. Repairing the valve cover; 2. Replacing the valve cover gasket and sealing ring. Precautions regarding the engine valve cover: 1. The engine valve cover primarily serves a sealing function to prevent oil leakage. 2. It should be inspected every 20,000 kilometers of vehicle travel, and replaced promptly if wear is detected.
12
0
Share

Reasons for the Steering System Warning Light to Illuminate?

Reasons for the steering system warning light to illuminate mainly include the following points: 1. The power steering warning light illuminating indicates an abnormality or malfunction in the power steering system, such as excessive air in the power steering system, leading to abnormal vehicle steering. 2. Foreign objects in the steering hydraulic lines causing the steering pump flow control valve to stick, among other issues. Below is a partial introduction to the vehicle steering system: 1. The vehicle steering system is a power steering system, which means it uses external force to help the driver complete steering with less effort. 2. Initially, this system was used in large vehicles, but now it is widely applied to various vehicle models.
13
1
Share

Can You Continue Driving with Tire Pressure at 170?

Tire pressure at 170 should not be continued for driving. Low pressure increases tire deformation, leading to cracks on the tire sidewalls and reduced elasticity, which increases the load on the vehicle while driving. In case of impact, it may cause internal cracks and blowouts. The hazards of low tire pressure are as follows: 1. Increased friction coefficient with the road surface, leading to higher fuel consumption. 2. Causes heavy steering and potential deviation, which are unfavorable for driving safety. 3. Increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling. 4. Reduces the functionality of the cord and rubber, leading to delamination or cord breakage, and excessive friction with the rim, causing damage to the bead area and abnormal wear. 5. The friction between the tire and the ground increases exponentially, causing a sharp rise in tire temperature, softening of the tire, and a rapid decrease in strength. High-speed driving may result in a blowout. 6. Low tire pressure increases tire deformation, leading to cracks on the sidewalls and flexing movements, causing excessive heat, rubber aging, fatigue in the cord layers, cord breakage, and an increased contact area with the ground, accelerating shoulder wear.
12
4
Share

Should You Pull the Clutch When Decelerating a Motorcycle?

Motorcycle deceleration does not require pulling the clutch. Here are the details: 1. When braking to decelerate a motorcycle, there is no need to pull the clutch. Engaging or disengaging the clutch is unnecessary because the engine operates normally during braking—simply applying the brakes is sufficient. 2. However, during emergency braking, the engine may temporarily stall. When coming to a stop, you can pull the clutch once the speed has sufficiently decreased. If the speed is already very low, you may also pull the clutch simultaneously while braking. 3. The primary function of the clutch is to transmit or cut off engine power, enabling smooth starts and seamless gear shifts.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.