Does a 2012 vehicle require annual inspection in 2021?

2 Answers
McAdaline
07/29/25 7:18am
For a 2012 vehicle, if it underwent annual inspection before the implementation of the new policy, it will require inspection in 2021; if it was inspected after November 20, 2020, it will not need inspection in 2021. Relevant information about vehicle annual inspection is as follows: 1. Non-operational mini and micro passenger vehicles with 7 to 9 seats within 6 years: Eligible vehicles are exempt from inspection. 2. Non-operational mini and micro passenger vehicles: For those over 6 years but under 10 years, the inspection frequency changes from once a year to once every two years. 3. For private vehicles over 10 years old: Follow the original inspection cycle, i.e., once a year for vehicles between 10 and 15 years old, and once every six months for vehicles over 15 years old.
Was this review help?
1
5
Share
Octavian
08/12/25 10:38am
My car was purchased in 2012, and by 2021 it had been exactly 9 years. According to national regulations, vehicles over 6 years old require an annual inspection. Vehicle inspection is something you can't slack on, as it can detect potential issues like brake failure or excessive exhaust emissions. If an accident happens, you'll regret it deeply. I always go to the repair shop in advance for a minor service, changing the oil and filters, to avoid getting stuck at the inspection center. The procedure is simple: bring the vehicle license and compulsory insurance policy to the designated location, and the cost is a few hundred yuan. Don’t forget to go on time—if you miss it, the fine starts at 200 yuan plus penalty points, and insurance claims become troublesome. After developing this habit, my old car runs more smoothly, and I feel much more at ease on the road.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

Can very small dents on a car be repaired?

Very small dents on a car can be repaired. Methods for repairing small dents: The most traditional treatment method is sheet metal repair, which can be used for both large and small dents. Although sheet metal repair is relatively expensive, it provides the best results. Car owners can also purchase a car dent repair kit to attempt the repair themselves. However, sheet metal work generally cannot be completed by car owners on their own and requires a visit to an auto repair shop. Methods for repairing bumper dents: If the dent is on the bumper, you can pour hot water over it to utilize thermal expansion and contraction to restore its elastic deformation. Most bumper materials are relatively soft, and the plastic has good elasticity. The operation is relatively simple—just prepare a pot of boiling water in advance, pour it over the impacted area, wait for it to heat up, and then press the dented area back into place by hand.
3
2
Share

How many points are deducted for reversing at highway exits?

Reversing at highway exits results in a 12-point deduction and a fine. Points deduction summary: For bus and truck drivers, in addition to the fine and 12-point deduction, their driver's license will be downgraded. If it is a commercial vehicle, the traffic police department will also report to the passenger transport unit, leading to internal penalties from the unit. Relevant regulations: Article 24 of the Road Traffic Safety Law states that the public security traffic management authorities shall implement a cumulative demerit point system for motor vehicle drivers who violate road traffic safety laws and regulations, in addition to imposing administrative penalties according to the law. The public security traffic management authorities shall detain the motor vehicle driver's license of those who accumulate demerit points up to the prescribed value, provide them with education on road traffic safety laws and regulations, and require them to retake the test; if they pass the test, their motor vehicle driver's license will be returned. For motor vehicle drivers who comply with road traffic safety laws and regulations and do not accumulate demerit points within one year, the validity period of their motor vehicle driver's license may be extended. The specific measures shall be stipulated by the public security department of the State Council.
6
0
Share

What does 60v mean?

60v refers to the battery voltage. Relevant introduction about electric vehicle batteries: Optimal battery temperature: The suitable temperature range for battery cells is 0-40 degrees Celsius. Temperatures that are too high or too low can affect the activity of the battery cells, cause irreversible damage, and even shorten the battery lifespan. When charging an electric vehicle, if the battery temperature is below 0 degrees Celsius, it is necessary to preheat the battery before charging, which will also prolong the charging process and is not conducive to battery maintenance. Precautions for battery use: During vehicle charging, the temperature of the battery pack rises. If the temperature difference is too large, it can cause chemical reactions in the active materials on the positive and negative plates, thereby shortening the battery life. Conversely, when the battery temperature is too low, the battery's storage capacity decreases, making it prone to over-discharge, which in turn shortens the battery life.
15
0
Share

How Much More Fuel Can Be Added After the Pump Nozzle Clicks Off?

After the fuel tank is filled to the point where the pump nozzle clicks off, approximately 3-6 liters of fuel can still be added, though this capacity varies by vehicle model. The 'click-off' refers to the automatic stopping action of the fuel pump nozzle when the car's tank is nearly full. This occurs because the nozzle contains a hidden trigger mechanism; once the fuel reaches the nozzle's tip, the automatic shut-off device activates, stopping the fuel flow. Clicking off doesn't mean the tank is completely full, as the upper part of the tank reserves space for fuel vapor to prevent excessive internal pressure. The 'click-off' action doesn't affect the fuel amount, but drivers should note two things: first, check if the fuel pump display has reset to zero before refueling; second, qualified fuel pumps are labeled with a 'Mandatory Inspection Passed' tag, while unqualified ones are marked with an 'Out of Service' tag. Reasons why the actual refueling amount can exceed the tank's nominal capacity: The 'Safety Performance Requirements and Test Methods for Automotive Fuel Tanks' stipulate that the nominal capacity of a fuel tank should be 95% of its maximum liquid capacity. Since fuel is highly volatile and its volume changes significantly with temperature, tanks reserve some safety space to accommodate fuel expansion. Market vehicle tanks typically have a nominal capacity of only 88%-90% of their maximum volume, so it's possible for the actual refueling amount to exceed the nominal capacity.
6
4
Share

Is it too early to change to snow tires in October in Northeast China?

In Northeast China, it is not too early to change to snow tires in October. Reasons for changing to snow tires in October: For vehicles in northern regions, October is the right time to change to snow tires because the temperature difference between day and night is very significant in the north. You don't need to wait until it snows to change to snow tires; instead, when the average temperature drops below 7 degrees Celsius, you should switch to snow tires. This is because regular all-season tires become harder in winter, reducing the friction coefficient. When the temperature falls below 7 degrees Celsius, the tire material undergoes changes, becoming harder, which affects the tire's grip and wear performance. Different brands of snow tires vary in softness and tread patterns. Compared to ordinary all-season tires, winter tires are made of relatively softer materials and have wider and deeper tread grooves, providing stronger grip and anti-skid performance on snowy and icy roads, ensuring the vehicle's traction in low-temperature conditions. Introduction to snow tires: Snow tires are designed for use in snowy conditions. Rubber tires with metal studs can enhance grip and are used in colder, snow-prone areas during winter. Compared to regular tires, snow tires use special formulations to increase friction with snowy and icy surfaces.
15
3
Share

Which Button is the One-Touch Defogging?

One-touch defogging is indicated by a fan-shaped symbol with three vertical wavy lines. Introduction to the One-Touch Defogging Button: The one-touch defogging function utilizes the car's air conditioning system to quickly and effectively remove fog from the windows. When driving in winter, you may notice fog forming on the windows within minutes. This occurs due to the temperature difference between the inside and outside of the car, causing condensation on the cold glass. Some drivers use a towel to wipe the fog away, but it often reappears shortly after. In such cases, the one-touch defogging function can be used. Simply press the one-touch defogging button inside the car and adjust the air vents to the front windshield position. The fog on the windshield will disappear quickly. How the One-Touch Defogging Function Works: Car defoggers are used to separate liquid droplets from gases in the tower to ensure mass transfer efficiency, reduce valuable material loss, and improve the operation of the compressor after the tower. Typically, a defogger is installed at the top of the tower. It can effectively remove droplets of 3-5um. Installing a defogger between trays not only ensures the mass transfer efficiency of the trays but also reduces the distance between them. Therefore, defoggers are mainly used for gas-liquid separation and can also serve as air filters for gas separation. Additionally, wire mesh can act as a buffer for various instruments in the instrumentation industry to prevent radio interference or as an electronic shield.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.