Do You Still Take the Driving Test When It Rains?

1 Answers
Melo
07/29/25 4:59pm
You still need to take the driving test when it rains. Here are some precautions for taking the driving test in the rain: 1. Wipe the rearview mirrors clean before getting in the car: During the test, you are not allowed to stick your head out, and once the seatbelt is fastened, you cannot reach out to wipe the mirrors. 2. Do not close the windows too tightly: Otherwise, fog will form inside the car, affecting visibility. 3. Turn on the windshield wipers: Adjust the wiper speed according to the intensity of the rain to ensure clear visibility. 4. Control your speed: It's best to drive a bit slower than usual. 5. Shake off any mud or water from the soles of your shoes before getting in the car: This prevents slipping, and avoid sudden acceleration or braking during the test. The road is slippery in the rain, which can easily cause the wheels to skid, so stay calm and drive carefully.
Was this review help?
14
0
Share
More Forum Discussions

What are the key points to observe when reversing into a parking space from the right?

When reversing into a parking space from the right, pay attention to the following 3 key points: 1. Position of the right rear wheel and the corner line of the parking space: While reversing, carefully observe the right side mirror. When the mirror shows that the rear wheel is about to cross the corner line of the parking space, quickly turn the steering wheel fully to the right. 2. Distance between the rear wheel and the right corner of the parking space: Monitor the distance between the rear wheel and the right corner of the parking space. If the distance is exactly 30cm, there is no need to adjust the direction; simply continue reversing. If the distance is less than 30cm, you can turn the steering wheel halfway back to maintain a distance of about 30cm. 3. Whether the car body is parallel to the side line of the parking space: Observe the side mirror carefully. When the car body is parallel to the side line of the parking space, quickly straighten the steering wheel. If the alignment is uneven, make slight adjustments following the principle of 'steering towards the wider side.'
2
3
Share

What is a Dual Clutch?

Here is an introduction to dual clutches: 1. Overview: The clutch is located between the engine and the transmission, serving as the 'switch' for power transfer from the engine to the transmission. It is a transmission mechanism capable of both transmitting and cutting off power. Its primary function is to ensure smooth vehicle starts, reduce impact loads on transmission gears during gear shifts, and prevent overload in the drivetrain. 2. Structure: The DSG transmission mainly consists of a multi-plate wet dual clutch, a three-shaft gear transmission, an automatic gear-shifting mechanism, and an electronically controlled hydraulic control system. The most innovative core components are the dual clutch and the three-shaft gearbox. 3. Principle: Structurally, the DKG is composed of two sub-transmissions, each equipped with a clutch. Clutch 1 is connected to sub-transmission 1, and clutch 2 is connected to sub-transmission 2.
4
5
Share

Reasons for the Rapid Discontinuation of the Geely Xingyue L

Reasons for the rapid discontinuation of the Geely Xingyue L are as follows: 1. Insufficient brand influence: Although Geely has become a top-tier domestic automotive brand, there is still a significant gap compared to joint-venture brands. The final price of the Geely Xingyue 2.0T model is already comparable to that of competing models in the same segment, such as the Honda CR-V, Toyota RAV4, and Nissan X-Trail. Despite these vehicles having fewer features than the Xingyue, many consumers still prioritize joint-venture brands due to their brand appeal. 2. Limited rear-seat space: The Geely Xingyue features an exaggerated fastback design, which greatly enhances its visual appeal—viewed from the side or rear, it can even evoke the illusion of a BMW X6. However, the trade-off for this stylish design is reduced interior space. The headroom in the rear seats of the Geely Xingyue is relatively cramped, leading to a sense of confinement when fully loaded, resulting in poor comfort performance.
10
3
Share

What does the exclamation mark light mean?

When an indicator light with an exclamation mark appears on the dashboard, it indicates an abnormality or malfunction in the corresponding part of the vehicle. There are various fault lights with exclamation marks in a car, each representing different issues. These mainly include the handbrake warning light, brake system fault warning light, steering system fault warning light, tire pressure abnormality warning light, lighting system fault warning light, transmission fault warning light, and windshield wiper fault warning light. Below is a detailed introduction: 1. Yellow triangle exclamation mark: This yellow triangle exclamation mark is a general fault indicator light. It may illuminate due to reasons such as clutch overheating, fuel cut-off system intervention or malfunction, parking sensor fault, exterior light bulb fault, engine oil pressure sensor fault, or traction control system warning or malfunction. 2. Tire pressure indicator light: Also a type of exclamation mark fault light. It briefly illuminates during ignition but automatically turns off after a few seconds, which is normal. However, if the tire pressure indicator light stays on or flashes, the most likely reason is abnormal tire pressure in one of the tires. 3. Lighting fault light: This light turns on when an exterior light bulb malfunctions, featuring an exclamation mark inside the bulb symbol, making it part of the exclamation mark fault light category. 4. Steering system fault indicator light: Also marked with an exclamation sign. It illuminates when the electric/mechanical steering mechanism fails or when there is a fault in the steering column lock. 5. Brake system fault light, transmission fault indicator light, and windshield wiper fault indicator light: If these lights stay on or flash, it means the corresponding system has a fault, and the vehicle should be stopped immediately for inspection.
7
1
Share

Should You Engage the Gear or Release the Handbrake First When Starting a Car?

When starting a car, you should engage the gear first and then release the handbrake. If you are on an incline and release the handbrake first, the car will be in a neutral coasting state, causing it to slide in the direction of the slope without any braking, which can easily lead to a safety hazard. By engaging the gear first and then releasing the handbrake, the car will receive a force from the engine idle when in first gear, effectively preventing potential dangers. The sequence for parking is the opposite of starting: when parking, you should first apply the handbrake and then shift to neutral to ensure the car does not move. For automatic transmission cars, when parking, simply shift to P (Park) and then apply the handbrake.
12
1
Share

How long is the Audi Q5?

The length, width, and height of the Audi Q5 are 4629 millimeters, 1898 millimeters, and 1655 millimeters respectively, with a wheelbase of 2807 millimeters. The Audi Q5 is a mid-size SUV under the Audi brand. The Audi Q5 has been discontinued and replaced by the Audi Q5L. In terms of power: the Audi Q5 uses a 2.0-liter turbocharged engine, which has a maximum power of 230 horsepower and a maximum torque of 350 N·m. It is equipped with AVS variable valve lift system and hybrid injection technology, using an aluminum alloy cylinder block and cast iron cylinder block. The front suspension of the Audi Q5 uses a five-link independent suspension, and the rear suspension uses a trapezoidal link independent suspension. In terms of configuration: it is equipped with a full-time four-wheel drive system and uses a Torsen central differential.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.