Do You Still Need to Press the Brake When Turning Off an Automatic Transmission Car?

1 Answers
McGriffin
07/25/25 12:43pm
When turning off an automatic transmission car, you need to press the brake. Driving an automatic transmission car only requires the use of the parking gear (P), reverse gear (R), neutral gear (N), and drive gear (D), which can fully meet the needs of general driving. However, in some special driving environments, other functional gears may be needed. Below is a related introduction: Manual/Automatic Transmission: This allows high-performance sports cars to not be limited by traditional automatic transmission constraints, enabling drivers to enjoy the fun of manual shifting. These cars have "+" and "-" gear selection options on their gear positions. In D gear: You can freely shift down (-) or up (+), just like a manual transmission. Drivers can force a downshift to slow down before entering a turn, similar to a manual transmission, and accelerate out of the turn in low or medium gear. Some automatic transmission cars have "+" and "-" shift buttons added to the steering wheel, allowing drivers to shift up or down without taking their hands off the wheel. When starting the engine: The automatic transmission also imposes restrictions on gear positions, which are adjustments made by manufacturers for safety reasons. Generally, the engine can only be started when the gear lever is in the P or N position.
Was this review help?
2
2
Share
More Forum Discussions

What car is Romeo?

Nissan Murano is Nissan's first large crossover SUV. Here are the detailed introductions about Nissan Murano: 1. Model Introduction: Nissan Murano is Nissan's first large crossover SUV, with a length, width, and height of 4860mm/1885mm/1730mm respectively, and a wheelbase of 2825mm. 2. Vehicle Features: Nissan Murano is equipped with a 6-speed automatic transmission with manual mode, featuring front-engine four-wheel drive. It includes high-end services typically found in luxury cars, such as automatic climate control, rain-sensing wipers, an 8-speaker audio system, and a color screen on the center console.
5
1
Share

What does 5w-30 mean in engine oil?

5W-30 engine oil model meaning: In "5W30", the "5" indicates the low-temperature fluidity of the oil—the smaller the number, the lower the ambient temperature it can be used in; "W" stands for winter, and "30" represents the kinematic viscosity standard at 100 degrees Celsius, which is 30. This number indicates the oil's high-temperature resistance—the higher the number, the better the oil's protective performance at high temperatures. Here are the relevant details: 1. Classification of engine oil: SAE lubricant viscosity classifications for winter oils are: 0W, 5W, 10W, 15W, 20W, 25W. The symbol "W" stands for winter, and the smaller the number before "W", the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the minimum applicable temperature. SAE lubricant viscosity classifications for summer oils are: 20, 30, 40, 50. The larger the number, the higher the viscosity and the higher the maximum applicable temperature. 2. Selection of engine oil: The viscosity of the engine oil should be selected based on the recommendations in the manufacturer's "Vehicle Maintenance Manual". The oil grade can be chosen according to personal needs, vehicle model, and budget. 3. Regular oil changes: It is generally recommended to change the oil every 5,000 kilometers or six months, with adjustments made based on usage conditions and environment.
5
2
Share

How Long Does a Major Car Maintenance Take?

Major car maintenance generally takes between 2 to 5 hours. Here are the relevant details about major car maintenance: 1. Maintenance Interval: It is recommended to perform a major maintenance when the car reaches 40,000 to 60,000 kilometers. 2. Maintenance Content: Major car maintenance includes replacing the engine oil, oil filter, air filter, and fuel filter. 3. Importance of Maintenance: Replacing the fuel filter can filter out impurities and water in the gasoline, providing clean fuel to the engine and allowing it to perform at its best. During engine operation, various frictions occur, and the debris generated from these frictions mixes with the engine oil. Not filtering the oil regularly directly affects the lubrication of the engine.
11
0
Share

How many seats does the new Lincoln SUV Nautilus have?

The new Lincoln SUV Nautilus has 5 seats. Here are the related details: 1. Body dimensions: It is a mid-to-large-sized vehicle with body dimensions of 4849mm in length, 1936mm in width, and 1691mm in height, and a wheelbase of 2849mm. 2. Front and rear wheels: The front track is 1653mm, the rear track is 1663mm, and the fuel tank capacity is 70 liters. 3. Engine: The new Lincoln SUV Nautilus is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, with a maximum power of 165kW and a maximum torque of 368Nm. 4. Drive system: The drive system is front-wheel drive, with MacPherson independent suspension in the front and multi-link independent suspension in the rear.
2
0
Share

What is the normal tire pressure for high-speed driving?

Generally, the tire pressure of a car should be maintained at around 220-260 Kpa. Before driving on the highway, it is advisable to inflate the tires to around 250 or 260 Kpa. If the tire pressure is too low, it can easily cause excessive compression and deformation of the tire cord layers during high-speed driving. As the speed increases, it may even lead to the phenomenon of standing waves in the tires, and in severe cases, it can cause a tire blowout. Here is some related information: 1. The meaning of tire pressure: Tire pressure, strictly speaking, refers to the air pressure inside the tire. In car maintenance, the engine plays the role of the car's heart, and engine damage can lead to the car's lifespan being exhausted. Tire pressure symbolizes the car's blood pressure, and the level of tire pressure has a crucial impact on the car's performance and power. Air pressure is the lifeblood of the tire; too high or too low will reduce the tire's lifespan. 2. The hazards of low tire pressure: If the air pressure is too low, it can cause increased deformation of the tire body and make the tire sidewalls prone to cracking. Additionally, excessive heat can accelerate rubber aging, fatigue the cord layers, and break the cords. It can also increase the tire's contact area with the ground, accelerating wear on the tire shoulders. If the air pressure is too high, it can cause the tire cords to stretch excessively and deform, reducing the tire body's elasticity and increasing the load during driving. If impacted, it can easily lead to internal cracking or bursting. High air pressure can also accelerate wear on the tire tread and reduce puncture resistance.
18
5
Share

Is Running a Red Light Captured from Behind?

Running a red light is captured from behind. The determination is made by capturing three photos with an electronic camera: the first photo shows the vehicle crossing the intersection stop line, including the red light and license plate number; the second photo shows the vehicle completely passing the stop line, including the red light and license plate number; the third photo shows the vehicle continuing to move, mainly by comparing the position change from the second photo, including the red light and license plate number. Capturing these three photos can confirm the vehicle ran a red light. Article 26 of the "Road Traffic Safety Law" states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage. If a vehicle passes through an intersection during a red light, it constitutes the traffic violation of running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states that motor vehicle signals and non-motor vehicle signals indicate: When the green light is on, vehicles are permitted to pass, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motor vehicle signals or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle signals. When the red light is on, right-turning vehicles may pass if they do not obstruct the passage of other vehicles or pedestrians. To avoid running a red light, consider the following: First look at the arrow light, then the round light: Currently, there are two types of indicator lights: arrow traffic lights and round indicator traffic lights. When an arrow light is present, first look at the arrow light and then the round light to avoid running a red light. Note: When encountering a round red light, you may turn right; when encountering an arrow signal light with a red right arrow, you cannot turn right, otherwise it will be penalized as running a red light. Brake in time: When the red light turns on, do not let the front of the vehicle cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture it, and it will be penalized as running a red light. If the front wheels have just crossed the stop line when the signal turns red, do not proceed through the intersection; wait for the green light. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, judge accordingly; if there is no countdown, and the vehicle is close to the intersection with high speed, you may pass to avoid running a red light due to untimely braking. If the speed is slow and the vehicle is far from the intersection, brake immediately to avoid running a red light. Running a red light is not illegal in the following situations: Extreme weather: When visibility is very low, and even electronic police cannot clearly see the traffic lights. The photos of the violation may be blurred, and if you mistakenly run a red light, traffic police will not impose penalties. Emergency situations: When rushing a critically ill patient to the hospital, you may run many red lights, and 12 penalty points may not suffice. After delivering the patient, provide proof from the hospital or the rescued person to the traffic police for verification. If confirmed, the violation records can be cleared. If possible, call an ambulance to avoid traffic accidents caused by running red lights. Police directing traffic:
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.