Do You Need to Wait for the Traffic Light to Make a U-Turn?

1 Answers
LaNolan
07/30/25 2:57am
If the gap is marked with a dashed line, making a U-turn is not affected by the traffic signal and does not require crossing the pedestrian crossing. You can directly make a U-turn without affecting other normally moving vehicles and ensuring your own safety. If the gap is marked with a solid line, then making a U-turn requires crossing the pedestrian crossing and is subject to the traffic signal. When making a U-turn that requires crossing the pedestrian crossing, you must yield to pedestrians: If pedestrians are walking on the right side of the road's crosswalk and have not reached the centerline of the road, vehicles on the left side of the road should slow down and allow them to pass safely. If pedestrians are waiting outside the boundary line of the motorized and non-motorized lanes and have not entered the road, vehicles should slow down and allow them to pass safely. If pedestrians cross the boundary line between the motorized and non-motorized lanes, vehicles that do not stop and yield are committing a traffic violation and should be penalized. If pedestrians enter the motorized lane from the crosswalk, vehicles in the adjacent lane should slow down and allow them to pass safely. Failing to stop and yield is a violation and should be penalized. If pedestrians are waiting at the centerline of the road without entering the motorized lane, vehicles that do not stop and yield are committing a violation and should be penalized. If pedestrians cross the centerline of the road and enter the motorized lane, vehicles that do not stop and yield are committing a violation and should be penalized. If the road is divided by a green belt, vehicles must slow down and allow pedestrians waiting in the middle of the road to pass safely. Situations where U-turns are allowed: If there is a U-turn sign at the intersection, you can make a U-turn. If there is a U-turn signal light, follow its instructions. If there is no signal light, make the U-turn based on the specific situation without obstructing other vehicles or pedestrians. If the intersection does not explicitly prohibit U-turns or left turns, you can make a U-turn. "No explicit prohibition" means there are no "No U-turn" or "No Left Turn" signs, and the centerline is not solid. U-turns are also allowed in yellow grid zones. Yellow grid lines indicate no-stopping zones, but U-turns are permitted unless there is a central barrier. If there is a U-turn signal light at the intersection, follow its instructions—only make a U-turn when the light is green. If "No Left Turn" and "U-turn Allowed" signs appear together, U-turns are permitted, but left turns are not. Note that "No U-turn" is not the same as "No Left Turn." Things to note when making a U-turn at an intersection: Check the road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable location. If there is a "No Left Turn" sign, U-turns are also prohibited at that intersection, even if there is no explicit "No U-turn" sign, because U-turns require a left turn first. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, you cannot make a U-turn at that intersection. Always yield to oncoming traffic when making a U-turn. Failing to do so will make you fully liable for any accidents. Near the intersection stop line, lanes often have guiding arrows. The leftmost lane may not always have a left-turn arrow. If it has a straight arrow, U-turns are prohibited even if there are no explicit "No U-turn" signs.
Was this review help?
4
4
Share
More Forum Discussions

What is the method for changing the transmission oil of the Buick Envision 1.5T?

Start the engine to preheat the transmission to operating temperature; remove the oil drain bolt; after draining the old oil, reinstall the bolt. Add new ATF fluid; start the engine and shift from P to N, D, L1, L2, etc., staying in each gear for at least 5 seconds. Disconnect a cooling oil pipe from the automatic transmission; correctly connect the ATF exchanger's inlet and outlet oil pipes and the high-pressure air pipe.
5
1
Share

Where is the transmission oil filler hole on the Peugeot 308?

The transmission oil filler port for the Peugeot 308 1.6L is located on top of the transmission. You'll need to remove the air filter housing to access it. Here are the hazards of insufficient transmission fluid: 1. With low transmission fluid, gearbox noise becomes significantly noticeable, especially during high-speed driving. 2. Without proper lubrication from transmission fluid, gear shifting becomes rougher with increased jerkiness, particularly noticeable during winter driving when gear engagement becomes more difficult. In severe cases, this can lead to elevated internal transmission temperatures (due to reduced cooling effect) and may potentially damage internal transmission components.
12
5
Share

How many cylinders does the BMW 740 have?

The BMW 740 has six cylinders. Here is relevant information about cylinders: Introduction: A cylinder is a cylindrical chamber within an engine where a piston is driven by the pressure or expansion force of the working fluid, as well as similar but non-cylindrical parts in certain special types of engines. Types: In pneumatic transmission, a cylinder is an actuator that converts the pressure energy of compressed gas into mechanical energy. Cylinders can be categorized into two types: those performing reciprocating linear motion and those performing reciprocating swinging motion. Cylinders performing reciprocating linear motion can further be divided into four types: single-acting, double-acting, diaphragm-type, and impact cylinders.
4
5
Share

Does the Toyota Levin have a one-key start?

Toyota Levin is equipped with a one-key start function. The specific steps are as follows: 1. Start/Stop the Engine ① Start: Press the brake pedal and push the start button. ② Stop: After parking the vehicle, push the start button again to turn off the engine. During engine start-up, high-power-consuming electrical appliances will be temporarily turned off. 2. Turn On/Off the Power Supply If you only need to turn on the power supply, follow these steps: ① Turn On: Press the start button without stepping on the brake pedal. ② Turn Off: Press the button once more, and the engine tachometer needle will return to the OFF position.
16
4
Share

What is the wheel size of the Magotan?

The wheel size of the Magotan is 215/55R16. Below is relevant information about the wheel: 1. The tire itself is a flexible component. The cylindrical inner contour that supports the tire and the central hub, which is the part mounted on the axle, is called the wheel hub. Even with the same diameter, if the widths are different, the wheel hubs with varying data are suitable for their respective different tires. 2. The wheel hub unit is designed with inner and outer flanges. The inner flange is bolted to the drive shaft, while the outer flange holds the entire bearing assembly together. Worn or damaged wheel hub bearings or wheel hub units can lead to costly failures during vehicle operation and may even pose safety hazards.
3
5
Share

How to Turn Off the Sagitar with One-Key Start?

The method to turn off the engine with one-key start: Press and hold the one-key start button for a few seconds to turn off the engine. Below is some related information about one-key start: 1. When installing the plug wiring, pay attention to the ignition switch. Besides the OFF position, there are commonly three positions: ACC, ON, and START. During installation, first clarify which wire or wires are connected under each position and mark them accordingly. 2. The one-key start device is part of a smart car, serving as a button device to simplify the starting process. It can also be used to turn off the engine. This device can be retrofitted at the original car key lock position or as an independent panel.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.