Do You Need to Turn on A/C for Defogging in Winter?

2 Answers
PresleyDella
07/25/25 12:02pm
No, A/C is the cooling mode of the car air conditioning. Turning on the heater is sufficient for defogging. More information about the A/C button is as follows: 1. "AC" is the abbreviation of "Airconditioning" in English, which refers to the air conditioning device. 2. The A/C button is the switch for the air conditioning compressor. In summer, you must turn on the A/C button to activate the cooling mode. 3. The heater only utilizes the internal heat circulation of the car and does not require the air conditioning compressor to be activated. 4. On sunny winter days, you should turn off the A/C button. On rainy or snowy days, you can turn on the A/C button or switch between internal and external circulation, but turning on the A/C button will increase fuel consumption and reduce power.
Was this review help?
20
3
Share
DelSophia
08/11/25 8:12pm
For defogging while driving in winter, having driven for almost twenty years, I've always found turning on the A/C quite effective. Especially on cold days, when the windows fog up, just using the heater sometimes isn't enough. The heater can be too drying, making the fog thicker or causing it to condense faster. With the A/C on, the air compressor can remove moisture from the air. Although the air blown out is a bit cooler, once the warm air kicks in, the fog on the windshield clears much faster. I've tried not using the A/C before, and the fog was so thick that I had to wipe it off for a long time, which was dangerous and could even scratch the glass. Now, I've developed the habit of turning on the A/C first and then adjusting the heater as soon as I get in the car. Aiming it at the windows for a minute or two clears them right up. It's also important to adjust the vents properly to avoid blowing directly on your hands or face, so you don't get too cold in winter. A car is a tool, and safety comes first. This little habit can help prevent accidents.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

How to Obtain a B2 Driver's License with a C1 License?

To apply for a B2 license upgrade, you must have held a C1 driver's license for at least one year and not have accumulated full demerit points within the year. Alternatively, you can upgrade to a B2 license after holding any driver's license for one year. Submit your documents to a driving school qualified for B2 training. After passing the review, complete the registration and payment process, undergo legal training, and pass the written test before proceeding to the road test.
11
0
Share

What is the tire pressure for the Corolla Hybrid?

The tire pressure for the Corolla Hybrid is between 2.3 and 2.4 bar. Functions of tires: Ensure good ride comfort and smooth driving performance; ensure excellent adhesion between the wheels and the road surface; improve the vehicle's traction, braking, and off-road capabilities; transmit driving force, braking force, support vehicle loads, and reduce vibrations during driving. Corolla model specifications: Its body structure is a four-door, five-seater sedan, with dimensions of 4635 mm in length, 1775 mm in width, and 1470 mm in height. The wheelbase is 2700 mm, and the curb weight is 1535 kg.
9
5
Share

What is the reason why the Buick Envision cannot find Bluetooth?

Buick Envision cannot find Bluetooth due to Bluetooth not being turned on or poor compatibility. Bluetooth not turned on: Check whether the car Bluetooth switch is turned on. First, establish a pairing relationship by turning on the Bluetooth functions of both the mobile phone and the car Bluetooth device, and set the mobile phone Bluetooth to "visible to everyone" in the Bluetooth settings. Then search for Bluetooth devices on the phone, select the found device for pairing, and the connection will be successful after pairing is completed. Poor compatibility: Sometimes the car Bluetooth cannot connect because the call audio is not selected. Try connecting with other car Bluetooth devices, as there may be compatibility issues.
10
4
Share

How to Play Back the Dash Cam Footage on BYD Han?

To view the playback of the BYD Han dash cam, first remove the memory card and use a card reader to access and play the footage on a computer. Uses of a dash cam: It can record video images and audio during the car's operation, providing evidence for traffic accidents. Installing a dash cam can also help prevent staged accidents (insurance fraud), thereby avoiding unnecessary troubles and losses, and protecting the car owner's interests. Dash cam audio recording: Dash cams generally have audio recording functionality, but this can be turned on or off in the settings to protect privacy. As long as the audio recording feature is enabled, the dash cam can record sound, though it typically only captures audio inside the vehicle.
9
0
Share

Why is the car's warning light constantly on?

The reasons for the car's warning light being on include faults in the water temperature sensor, crankshaft sensor, oxygen sensor, spark plugs, ignition coil, etc. When the engine warning light comes on, it can be categorized into three scenarios: 1. The car cannot start, which might be due to a fuel pump or ignition component failure—immediate assistance should be sought; 2. The warning light is on, but there are no noticeable abnormalities while driving—this could simply be a sensor malfunction, allowing for continued driving at low to moderate speeds with caution; 3. The engine warning light is on, the vehicle can still be driven, but exhibits severe shaking, lack of power during acceleration, etc.—in such cases, the car should be stopped and rescue services called.
19
4
Share

How to turn on the high beam of the Lynk & Co 03?

To turn on the high beam of the Lynk & Co 03, locate the light control switch on the left side of the steering wheel. Rotate the switch to the high beam position, and the high beam indicator will appear on the dashboard. High beam operation tips: Pull the left lever toward the driver to activate the high beam, which will turn off when released as the lever automatically resets. Push the lever away from the driver to keep the high beam on continuously; manually pull the lever back to its original position to turn off the high beam. When to use high beams: Appropriate use of high beams can help with "road recognition" and serve as a reminder to oncoming vehicles.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.