···
Log in / Register

Do you need to take photos when registering for a driver's license?

4 Answers
LaHailey
07/28/25 1:44pm

You need to take photos when registering for a driver's license. Here is some extended information about the photo requirements for driver's license registration: 1. Purpose of the photos: The photos are mainly used for the forms filled out during registration, the forms used during the exams, the forms in the driving school's archives, and the photo on the driver's license. Generally, you need to submit around 7-20 photos, depending on local requirements. 2. Photo requirements: The photos should be one-inch, color, with a white background. Hair should not cover the ears or eyebrows, and no jewelry should be worn. If you usually wear glasses, you should also wear them in the photo (except for contact lenses), and wear non-white clothing.

Was this review help?
8
4
Share
OGia
08/11/25 6:20pm

I remember when signing up for a driver's license, taking a photo was unavoidable. When I went to the driving school to register, the staff directly took me to the photo area and asked me to sit properly facing the camera. The photo-taking process was simple: stand straight and don't move, ensure your face is clear, and the staff clicked once to get it done. The photo must be a standard ID photo, with a white background and front-facing, and must meet specific size requirements so it can be used on the driver's license card as part of identity verification. If you don't take the photo, the entire registration process gets stuck; I once heard someone forgot to bring an ID photo and tried to slip through, but was asked to retake it. Relatedly, the driver's license photo also goes into the system database and will be used for future exams or license renewals. It's advisable to comb your hair and dress neatly in advance, as that headshot will follow you for several years. Don't be too nervous; taking the photo is just a small step and will be over in minutes.

Was this review help?
7
5
Share
Expand All
Cheryl
09/29/25 2:22am

When registering for a driver's license test, taking a photo is mandatory. Let me share from a trainee's experience: Upon entering, the staff will ask, 'Did you bring a photo?' If not, there's equipment on-site to take one immediately. The photo must be recent, meet the specified dimensions, and will be used for making the license and entering the system. It's not just a formality—it's also about identity security to prevent others from impersonating you during the exam or when collecting the license. Some places may allow you to bring your own photo, but you should check the standards in advance, such as no hats or glare. Related topic: After taking the photo, your image will be used throughout the training process and may even appear on apps. Make sure your expression is natural to avoid issues requiring a retake. Overall, the registration photo is a necessary step—don't skip it.

Was this review help?
5
5
Share
Expand All
LeAdam
11/12/25 4:18am

In the driver's license application process, taking photos is a standard procedure. I understand it's because the license requires personal photos for card production and identity verification. Staff usually ask you to take the photo on-site, which must meet size requirements, such as a 2-inch white background. The purpose is to ensure every driver's real identity and reduce fraud risks. Relatedly, if the photo is blurry or non-compliant, it may lead to application failure or delay. Handling it directly during registration can avoid future hassles. The photo is also used for identity verification in the exam system. The entire process is quick and efficient, taking less than a minute to complete.

Was this review help?
16
1
Share
Expand All
More Forum Discussions

Where is the fuse box located in the Discovery 4?

The Discovery 4 has two fuse boxes. The interior fuse box is located behind the glove compartment on the passenger side, while the engine fuse box is situated in the engine compartment next to the battery. Functions of the fuse boxes: The interior fuse box manages the electrical components inside the vehicle, such as the power windows, airbags, power seats, and cigarette lighter. The engine fuse box is responsible for the fuses of external electrical components, including the engine control unit, horn, windshield washer, ABS, and headlights. Introduction to fuses in the fuse box: Automotive fuses are a type of current fuse. When the circuit current exceeds twice the rated current of the fuse, it will blow within seconds to protect the circuit. Always replace fuses according to the rated current value specified on the fuse box cover, and never use a fuse with a higher rated current than recommended.
5
2
Share

Is the upper bearing of Weichai connecting rod 020 or 033?

Weichai connecting rod upper bearing is 020. The following is an introduction about connecting rods: 1. Structural composition: The connecting rod body consists of three parts. The part connected to the piston pin is called the small end of the connecting rod, the part connected to the crankshaft is called the big end of the connecting rod, and the rod connecting the small end and the big end is called the connecting rod shank. 2. Main failure modes: The main failure modes of connecting rods are fatigue fracture and excessive deformation. Usually, fatigue fractures occur in three high-stress areas on the connecting rod. The working conditions of the connecting rod require it to have high strength and fatigue resistance, as well as sufficient rigidity and toughness.
7
1
Share

What does Audi 404555 represent?

Audi's 40, 45, and 55 represent more detailed power information than their displacement—the G-value. Here is the relevant information: 1. G-value: The G-value is commonly used in racing and aviation. It is a recognized measure of acceleration that can comprehensively and objectively reflect a vehicle's overall performance. It can be understood as the car's acceleration performance being 30%-35%-50% of the gravitational acceleration G, with higher values indicating better acceleration performance. 2. Calculation method: Calculate the vehicle's acceleration based on the 0-100km/h acceleration time, compare it with gravitational acceleration, multiply by 100, and round the resulting value to obtain a two-digit number, which corresponds to the numerical part of the model's tail badge.
13
0
Share

Can I Replace the License Plate Without the Vehicle Owner's ID Card?

You can replace the license plate without the vehicle owner's ID card. Here are the relevant details: 1. Article 44: If the motor vehicle license plate or registration certificate is lost, missing, or damaged, the vehicle owner must apply for a replacement at the vehicle management office where the vehicle is registered. The vehicle management office will review the submitted documents and proofs, retrieve any undamaged or non-lost license plates, and issue a replacement within 15 days from the date of acceptance, retaining the original license plate number. 2. Notes: The vehicle must not be in a state of compulsory deregistration or reported as stolen when applying. If the license plate is damaged or partially lost, the remaining parts must be returned to the relevant authorities.
4
3
Share

Why can't a C1 license holder ride a motorcycle?

Because the driving methods are different. A driver who is proficient in driving a car may not necessarily be skilled in riding various types of motorcycles, which could pose safety hazards. Here is more information about the C1 driver's license: 1. C1 license driving level: Includes (all models of C2, C3, C4) allowing the driving of small and micro passenger cars, light and micro trucks, and light, small, and micro special-purpose vehicles. 2. Examination subjects: Include traffic regulations and related knowledge, field driving, road driving, and safety and civilized driving common sense, totaling four subjects.
3
5
Share

What to Do When an Audi Door Won't Open?

Audi door won't open for the following reasons: 1. Rear door won't open: If the rear door won't open, it might be due to the child safety lock being engaged. Try turning off the child lock. If the issue persists, it could be caused by a detached linkage rod inside or a damaged lock mechanism, which would require replacement. 2. Component aging: The motor inside the door lock assembly may have aged, leading to insufficient power that prevents the unlocking mechanism's linkage pin from popping out. This results in the exterior door handle being pulled without engaging the mechanism. The solution is to replace the motor with an original imported one, replace the central door lock unit assembly/lock mechanism, or simply replace the motor for a quicker fix.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.