Do You Need to Start the Engine to Turn on the Air Conditioner?

1 Answers
DiDante
07/29/25 11:59pm
To turn on the air conditioner, you must start the engine. Without starting the engine, you cannot use the air conditioner, whether for heating or cooling. Introduction to Vehicle Air Conditioning: Vehicle air conditioning consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components. It is an air conditioning system designed to regulate the temperature and humidity inside the vehicle, providing a comfortable environment for the driver. Working Principle of Vehicle Air Conditioning: When the compressor is operating, it sucks in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant increase, and it is sent to the condenser. Inside the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser and liquefies, turning into a liquid.
Was this review help?
15
1
Share
More Forum Discussions

Is Huatai Wheel Hub a Big Brand?

Huatai wheel hub is a big brand. 1. Introduction to wheel hubs: The wheel hub is the central part of the wheel, mounted on the axle to support the tire, typically cylindrical in shape, and usually fitted with bearings to reduce friction. The most common types are steel wheel hubs and aluminum alloy wheel hubs. 2. Types of wheel hubs: The main advantages of steel wheel hubs are their simple manufacturing process, relatively low cost, and strong resistance to metal fatigue. Aluminum alloy wheel hubs are lighter in weight, have lower inertial resistance, higher manufacturing precision, and less deformation at high speeds, which helps improve the vehicle's straight-line driving performance, reduces tire rolling resistance, and consequently lowers fuel consumption.
1
5
Share

What are the mock test questions for C1 driver's license subject one?

Here is the relevant introduction to subject one: 1. Introduction to subject one: If you fail the first exam, you can apply for a make-up exam on the spot. If you still fail the second make-up exam, then you fail this exam and can only schedule another appointment after 10 days. The subject one exam follows a unified system nationwide, with a passing score of 90. There are a total of 100 questions, each worth 1 point, meaning you need to answer at least 90 questions correctly to pass the subject one exam. 2. The number of appointments should not exceed 5 times: During the validity period of the driving skills test permit, the number of appointments for subject two and subject three road driving skills tests should not exceed five times each (i.e., a total of ten exam opportunities). If you still fail the fifth scheduled exam, the results of other subjects that have passed will be invalidated, and the student will need to start the exam again from subject one.
1
0
Share

What is the reason why the Wuling Hongguang S remote control cannot lock the door?

Wuling Hongguang S remote control cannot lock the door because the remote control lock is malfunctioning or the antenna of the remote transmitter in the car is aging, which causes the remote key to not work. The basic components of the remote key are as follows: 1. Transmitter: It consists of a transmission switch, transmission antenna, integrated circuit, etc., containing an identification code storage circuit and an amplitude modulation circuit, with a button-type lithium battery on the opposite side of the circuit. The transmission frequency uses radio waves, and the transmission switch button sends a signal once per press; 2. Receiver: After the transmitter sends the identification code using shortwave modulation, it is received by the car's shortwave antenna, and then enters the shortwave high-frequency amplification processor of the receiver's electronic control unit through a distributor for demodulation, where it is compared with the demodulator's identification code.
11
1
Share

Should I Refuel with 80km Remaining?

If your fuel indicator shows low with 80km remaining, refueling is necessary. Here are some precautions regarding car refueling: 1. Avoid overfilling: Overfilling the fuel tank can easily clog the ventilation hole. Once the ventilation hole is blocked, the air pressure inside the tank will drop below normal, leading to poor fuel supply or even complete failure. Overfilling also increases the vehicle's weight, thereby increasing fuel consumption. Additionally, gasoline can deteriorate, posing safety risks. 2. Try to refuel before the warning appears: While driving, always monitor the fuel gauge. When the needle indicates a quarter tank remaining, it's time to refuel. If the tank remains empty for too long, the temperature difference inside and outside can cause condensation, leading to moisture buildup inside the tank. This can corrode the tank, degrade fuel quality, and increase the engine's burden.
5
3
Share

What is the reason for an electric car making continuous noise?

Electric cars making continuous noise is generally caused by door hinge issues, which can usually be resolved by applying appropriate lubricating oil to the hinges. Below is relevant information about electric vehicles: 1. Power source: The power source provides electrical energy to the drive motor of the electric vehicle, which converts the electrical energy into mechanical energy. Currently, the most widely used power source is lead-acid batteries. However, with advancements in electric vehicle technology, lead-acid batteries are gradually being replaced by other types of batteries due to their low energy density, slow charging speed, and short lifespan. 2. Components: These include the electric drive and control system, mechanical systems for power transmission, and working devices designed to accomplish specific tasks. 3. Core: The electric drive and control system is the core of an electric vehicle and represents the most significant difference from internal combustion engine vehicles.
20
3
Share

What are the functions of the low-pressure fuel pump and high-pressure fuel pump?

High-pressure fuel pump's function is: to increase fuel pressure for high-pressure injection to achieve atomization effect. The main uses of the high-pressure fuel pump are as power sources for hydraulic devices such as jacks, heading machines, extruders, and cotton gins. The low-pressure fuel pump supplies fuel from the fuel tank to the high-pressure fuel rail. Below is relevant information about fuel pumps: 1. Power source: Although vehicle electrification has become an irreversible trend, the main power source for current vehicles still relies on traditional fuel engines. For fuel engines, general focus is mostly concentrated on mechanical components like pistons and cylinders, as well as electronic control units for ignition and valve timing. Few people pay attention to the fuel supply system, especially the fuel pump at the front end of the fuel supply system. 2. Working principle: The working principle of automotive fuel pumps. Currently, most vehicles use vane-type electric fuel pumps. Vane-type electric fuel pumps have advantages such as high fuel delivery volume, high fuel pressure, stability, low noise, and long service life. This type of fuel pump mainly relies on an electric motor to drive the turbine blades to rotate, and uses centrifugal force to draw fuel in through the inlet hole and discharge it through the outlet hole.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.