Do You Need to Press the Brake to Start with One-Button Start?

What is the Toyota 4WD?

It is the Toyota RAV4. Below is a related introduction to the Toyota RAV4: 1. Exterior: The new RAV4 comes in two models, a 3-door and a 5-door. The air intake and front and rear bumpers emphasize an off-road feel, while the enlarged headlights and Toyota logo are more prominent. Due to an 80 mm increase in wheelbase and enhanced cabin height and width, the interior space is spacious and comfortable. The cabin design is flexible, allowing for multiple adjustments similar to an MPV. The rear seats can slide backward, fold, and flip. 2. Features: The RAV4 stands out for its superior configuration, including standard features such as cruise control, EPS electric power steering, and rear seats that can slide and fold with a single touch. Except for the base Classic model, the entire RAV4 lineup is equipped with VSC vehicle stability control, 6 airbags, TRC traction control, HAC hill-start assist, and an automatic limited-slip differential. Additionally, smart keys, one-touch start, and DAC downhill assist are included in most models.

5

4

Share

Must I Replace a Cracked Tire?

Tire cracks can be assessed using the following methods to determine if replacement is necessary: 1. Outer edge cracks: If there are significant cracks on the outer edge of the tire, it indicates the tire has frequently been underinflated, meaning insufficient pressure. Considering the reduced grip performance in rainy conditions, the tire needs replacement. 2. Bulging and wavy cracks: If the tire's contact area shows bulging cracks on both sides and wavy cracks around the circumference, it suggests severe wear in components like the shock absorbers, bearings, and ball joints. The tire should be replaced, but first, inspect the suspension system for wear and replace any worn parts. Otherwise, replacing the tire alone won't solve the issue. 3. Uniform surface cracks: Once the tread is worn out, it means the tire's lifespan has ended, and replacement is mandatory. Additionally, the tread plays a crucial role in dispersing water on the road, maintaining the vehicle's grip. If the wear reaches the tire tread's standard depth (usually 1.6 mm for tires under 175 mm in width and 2 mm for wider tires), replacement is required.

18

2

Share

How to Handle Vehicle Annual Inspection After It's Overdue?

To handle an overdue vehicle annual inspection, you should first accept the administrative penalty from the traffic management department, then proceed with the annual inspection at the vehicle management office or an automobile testing station as required. The purpose of vehicle annual inspection is to promptly identify and eliminate potential technical safety hazards in the vehicle, encourage owners to maintain and repair their vehicles on time, and reduce the occurrence of traffic accidents. For the sake of social safety and personal security, vehicle owners should conduct annual inspections in a timely manner. Below are the relevant details about vehicle annual inspection: 1. Introduction: Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate, equivalent to an annual physical examination for the vehicle according to the 'Technical Conditions for Motor Vehicle Operation Safety.' 2. Purpose: Vehicle annual inspection can promptly eliminate potential safety hazards in vehicles, encourage better maintenance and upkeep, and reduce the occurrence of traffic accidents.

9

2

Share

What documents are required for license plate replacement due to loss?

Vehicle registration certificate, original ID card of the vehicle owner and a copy, "Motor Vehicle License Plate Application Form", the following is relevant information: 1. Notes: The owner must first go to the vehicle management office to fill out a license replacement application form. For company vehicles, the form must be stamped with the company seal before submission. The vehicle management office will issue a police receipt and a temporary license plate. The temporary license plate should be affixed to a prominent position on the vehicle's front windshield for inspection by traffic police. 2. Vehicle registration certificate: The vehicle registration certificate is issued by the vehicle management authority, recording the main contents of the vehicle's initial registration. It is kept by the owner and carried with the vehicle for recording changes and inspections at any time. According to the "Road Traffic Management Regulations", the vehicle license plate and registration certificate are the legal documents required for a vehicle to be allowed on the road.

20

4

Share

What causes the ABS light to come on in a Golf?

There are several conditions under which the ABS light may illuminate, each with different causes and solutions, as detailed below: Condition 1: ABS warning light stays on (most common). Cause 1: The ABS speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed or the wheel's slip rate, thereby failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal quality due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. Condition 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, and the ABS light turns off. This may also occur if the ABS system's power supply voltage is too low, such as due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). Condition 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor electrical connection in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen and then retighten the grounding screws on the hydraulic valve body, cleaning the contact surfaces if necessary. Check for enlarged gaps in the connectors. Replace the ABS or ABS/ASR computer if needed. Condition 4: ABS warning light comes on during high-speed driving. Cause: The ABS computer detects a significant discrepancy between the rear and front wheel speed signals during high-speed driving. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, which can typically be found on the label near the fuel cap. Condition 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, and manually push the brake switch linkage down to its limit. Release the brake pedal to complete the self-setting process. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

12

3

Share

Can window film be applied without heating?

Window film cannot be applied directly without heating. Because the windshield has a certain curvature, a heat gun is needed to heat the thermal insulation film to match the curvature of the glass, ensuring a tight fit between the film and the windshield. The heating process primarily involves warming the entire film to make it adhere smoothly to the glass and pre-eliminate the thermal expansion and contraction stress under high temperatures from the sun. Below are the functions of car window film: 1. Heat insulation and sun protection: The film can effectively block a large amount of heat generated by infrared rays. 2. UV protection: Medium and long-wave ultraviolet rays can penetrate thick glass, and applying thermal insulation film can block most UV rays, preventing exterior damage and reducing the aging of car interiors.

1

Share

Do You Need to Press the Brake to Start with One-Button Start?

What is the Toyota 4WD?

Must I Replace a Cracked Tire?

How to Handle Vehicle Annual Inspection After It's Overdue?

What documents are required for license plate replacement due to loss?

What causes the ABS light to come on in a Golf?

Can window film be applied without heating?

Should the Chevrolet Captiva use 92 or 95 octane gasoline?

Why Can't I Smell the Perfume Placed in the Car?

How to Restart a Frozen Car Screen?

Does placing car keys and mobile phones together have any impact?