Do You Need to Press the AC Button When Turning on the Heater?

Is the annual inspection of a new car based on the production date or the registration date?

The annual inspection of a new car is based on the registration date. New regulations on vehicle annual inspection time: For new cars, an inspection is required every two years for the first six years, and then annually thereafter. The inspection month is the same as the month of vehicle registration. Additionally, if the timing is inconvenient, the inspection can be done up to three months in advance (e.g., if the inspection month is June, it can be conducted in April, May, or June). Early inspection does not affect the next inspection date. Considering most people's habits, congestion usually occurs at the end of the month, so it is recommended to prepare early at the beginning of the month. Documents required for vehicle annual inspection: Vehicle license, duplicate of compulsory traffic accident liability insurance policy, ID card of the person conducting the inspection, triangular warning sign, and fire extinguisher. (Vehicle violations must be resolved, and no modifications are allowed on the vehicle body.) Document explanation: The compulsory traffic accident liability insurance policy consists of the original and duplicate pages. The duplicate page must be submitted during the inspection and will be retained by the inspection agency. The ID card to be carried is that of the person who drives the vehicle to the inspection.

9

0

Share

At what engine temperature does the Qidian 150G1's fan start working?

Qidian 150G1's fan starts working when the engine temperature reaches 90 degrees. Definition of motorcycle engine: A motorcycle engine is a mechanical device that ignites the fuel-air mixture entering the cylinder, converting the thermal energy generated by combustion into mechanical energy. The crankshaft then transmits this power through the transmission mechanism to the motorcycle's rear wheel, transforming it into the driving force for the vehicle. Engine classification: Based on different energy conversion methods, engines can be categorized into electric motors (electrical energy → mechanical energy), hydraulic machines (water energy → mechanical energy), wind turbines (wind energy → mechanical energy), nuclear engines (nuclear energy → mechanical energy), and heat engines (thermal energy → mechanical energy), etc. Heat engines can be further divided into external combustion and internal combustion types. The motorcycle engine is one type of heat engine.

13

0

Share

Why Does a Motorcycle Need a Little Throttle to Start?

The reason a motorcycle needs a little throttle to start is due to the belt drive system, improper carburetor adjustment, or the need for carburetor cleaning. Belt Drive System: The belt drive system has particularly high resistance when the engine is cold. If the idle circuit's fuel concentration is insufficient and the carburetor's idle speed is set too low, the engine cannot maintain idle speed in a cold state. Sometimes, it requires manually applying a slight throttle until both the engine and the belt warm up. Improper Carburetor Adjustment: Some motorcycles are otherwise normal but have a misadjusted carburetor, requiring readjustment. Occasionally, there is no fault, but the throttle screw on the carburetor has loosened. Due to design flaws, the throttle screw on scooter carburetors is more prone to loosening and shifting under prolonged engine vibration. Carburetor Needs Cleaning: Some carburetors have their idle circuits clogged by fine impurities in the fuel, causing the engine to rely on the main fuel circuit for starting. This situation is rare but does occur occasionally. The engine may exhibit unusual behavior, typically manifesting as difficulty starting, unstable idle speed, and unresponsive adjustments to the carburetor's idle circuit.

5

4

Share

What is the working principle of the carburetor needle in a motorcycle?

The working principle of the carburetor needle in a motorcycle is to atomize gasoline and mix it with air to form a combustible mixture, which is then delivered to each cylinder. The motorcycle carburetor includes: The motorcycle carburetor has two needles, namely the main needle and the float needle. The main needle primarily controls the fuel flow rate. Typically, when referring to adjusting the needle, it specifically means adjusting the main needle. Method for adjusting the carburetor needle: When the vehicle experiences poor fuel supply, the clip position can be adjusted downward. If the vehicle shows signs of incomplete combustion, the clip position needs to be adjusted upward. The combustion condition of the vehicle can be visually indicated by the color of the spark plug. If the spark plug appears black, it generally indicates incomplete combustion, and the needle clip position should be adjusted upward in such cases.

5

0

Share

Do new energy vehicles require grounding for charging?

New energy vehicles require grounding for charging. Solution: Purchase a grounded charger. Factors affecting grounding resistance: Size of grounding electrode (length, thickness), shape, quantity, burial depth, surrounding geographical environment (such as flat ground, ditches, or slopes being different), soil moisture, texture, etc. To ensure proper equipment grounding, measuring grounding resistance with instruments is essential. Grounding resistance measurement methods can be divided into: Voltage-current meter method, ratio meter method, and bridge method. Based on specific measuring instruments and electrode arrangement, they can be categorized as: hand-cranked ground resistance meter method, clamp-on ground resistance meter method, voltage-current meter method, three-electrode method, and four-electrode method.

19

1

Share

Can a Modified One-Key Start System Be Paired with a Key?

Modified one-key start systems can be paired with keys. Solution: Visit a 4S store to replace the remote key. Simply match the code on the key with the one in the car. A remote key utilizes the wireless remote function of the central locking system, allowing you to unlock and lock the doors from a distance without inserting the key into the lock. Cars typically come with two keys—one for regular use and one as a spare. The method to modify a one-key start system is as follows: Install the induction device on the door handle, disassemble the dashboard and door panel, take out the wiring harness to be connected, solder the one-key start device wiring to the connector, place the original car's start switch in the ACC position, plug in the prepared wiring harness, and match the key.

12

4

Share

Do You Need to Press the AC Button When Turning on the Heater?

Is the annual inspection of a new car based on the production date or the registration date?

At what engine temperature does the Qidian 150G1's fan start working?

Why Does a Motorcycle Need a Little Throttle to Start?

What is the working principle of the carburetor needle in a motorcycle?

Do new energy vehicles require grounding for charging?

Can a Modified One-Key Start System Be Paired with a Key?

What does EPC mean on a car?

How to Turn Off the ECO Mode in a Car?

What does D gear 123 mean?

If Manual Transmission is Difficult, Should I Take the Automatic Transmission Test?