Do You Have to Wait 10 Days After Failing Subject 4?

2 Answers
VonAlice
07/29/25 7:42am
Subject 4 retake must wait for ten days, and can only be scheduled after the ten-day period. Introduction to Subject 4: Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. After the implementation of the Ministry of Public Security's Order No. 123, the Subject 3 test was divided into two parts: besides the road test, a safety and civilized driving knowledge test was added, commonly referred to as "Subject 4," which assesses "driving ethics." Retake Regulations: According to Article 44 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Each subject test can be taken once, and if the test is failed, a retake is allowed once. If the retake is not taken or is still failed, the current test session is terminated, and the applicant must schedule the test again. However, Subject 2 and Subject 3 tests must be scheduled at least ten days later. If the Subject 3 safety and civilized driving knowledge test is failed, the passed road driving skill test scores remain valid.
Was this review help?
2
3
Share
DelBryce
08/12/25 10:58am
I was quite disappointed when I failed the subject four test, thinking I needed to retake it as soon as possible. However, when I went to the test center to inquire, I found out that I had to wait 10 days before I could schedule the next exam. This is a standard regulation designed to give everyone a buffer period for reflection and review. Don’t underestimate these ten days—I used them to carefully go through the safety and civilization knowledge question bank and did some mock tests. I felt like I understood the details I had previously overlooked, such as traffic signals and emergency handling. When I retook the test, I passed it on the first try. Although the process took a bit of time, it allowed me to get my driver’s license more confidently, which was worth it. Driving is a serious responsibility, and learning more is never a bad thing. Don’t just rush for time; keeping a calm mindset is what’s important.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What to Do When You Can't See Clearly While Driving at Night?

Solutions for poor visibility when driving at night: 1. Control your speed; 2. Avoid overtaking when possible; 3. Increase following distance; 4. Overcome driving fatigue. Traffic volume is relatively low at night, and driving at high speeds may lead to accidents, especially when transitioning from bright to dark areas where the eyes need time to adjust. Reduce speed when approaching curves, slopes, bridges, narrow roads, or areas with poor visibility, and be prepared to brake or stop at any time. Try to avoid overtaking at night. If overtaking is necessary, first continuously switch between high and low beams to signal the vehicle ahead. Only proceed with overtaking after confirming it is safe to do so, as limited visibility at night increases the risk of side-swiping collisions.
2
5
Share

How Many Cylinders Does the Tank 300 Have?

Tank 300 is a four-cylinder vehicle. Engine specifications of the Tank 300: The Tank 300 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 167kW (227 horsepower) at 5500rpm and a maximum torque of 387Nm between 1800-3600rpm. It is paired with a ZF transmission. Engine application in the Tank 300: The Tank 300 features a 2.0T turbocharged engine with the model code E20CB. This engine is also used in the WV5, VV6, and VV7, making it the flagship engine of the WEY brand. The engine is known for its reliability and compatibility with regular 92-octane gasoline for daily use.
20
0
Share

What are the reasons why the Mercedes-Benz GLA200 cannot shift gears?

Mercedes-Benz GLA200 cannot shift gears, the reasons and solutions are as follows: Gear shift lock mechanism failure: The Mercedes-Benz transmission cannot shift gears, possibly due to a gear shift lock mechanism failure or a lock solenoid valve circuit failure. You can remove the shift cable, check the cable, and operate it to see if it can shift into other gears. Gear lock: It may also be due to gear lock or incomplete braking when parking, directly entering the P gear, causing gear braking instead of automatic braking. If the entire vehicle cannot power on, the automatic transmission will protect itself and will not shift. In this case, you can perform gear unlocking by pressing the black button above the transmission P gear to unlock it.
11
4
Share

What does the red car exclamation mark on the dashboard mean?

The red car exclamation mark on the dashboard is the brake system warning light. When this warning light illuminates, it indicates a malfunction in the vehicle's braking system. Immediate inspection is required to prevent potential safety hazards. There are several reasons why the brake system warning light may come on, including severely worn brake pads, insufficient brake fluid, overheated brake pads, or driving with the parking brake engaged. Brake fluid plays a crucial role in the vehicle's braking system. When the driver presses the brake pedal, the force applied is transmitted by the master cylinder piston through the brake fluid to the wheel cylinders at each wheel, causing the brake pads to contact the wheels and thereby stopping the vehicle.
15
4
Share

What are the methods to address excessive carbon monoxide levels?

The methods to address excessive carbon monoxide levels are: 1. Check the air filter, spark plugs, intake air temperature sensor, and intake manifold pressure sensor, then add dual-core friction reduction repair agent and high-efficiency cleaner. If ineffective, use a three-way catalytic converter cleaner to clean the three-way catalytic converter; 2. After using the high-efficiency cleaner, add the dual-core friction reduction repair agent for repair, then use the three-way catalytic converter cleaner to clean the three-way catalytic converter; 3. After using the high-efficiency cleaner, add the dual-core friction reduction repair agent for repair. Excessive carbon monoxide levels may be caused by an overly rich engine air-fuel mixture, incomplete gasoline combustion, obstructed intake system, worn fuel injectors, or severe cylinder wear.
14
5
Share

What are the reasons for the dash cam not working?

The reason the dash cam is not working is due to a dead battery. Below is an introduction to the functions of a dash cam and considerations for purchasing one: Functions of a Dash Cam: A dash cam is a device that records images, sounds, and other relevant information during vehicle travel. After installation, it can record the entire driving process in video and audio, providing evidence in case of traffic accidents. Considerations for Purchasing a Dash Cam: A dash cam should have good camera clarity and night recording capabilities. High definition is determined by the main control chip of the dash cam, so owners should pay attention to the image processing solution used by the main control chip. Additionally, the dash cam should have sufficient storage space to enable long-term effective recording.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.