Do Verna brake pads need to be replaced both front and rear?

1 Answers
LaAugust
07/29/25 10:40pm
Verna brake pads do not need to be replaced together front and rear. Automotive brake pads, also known as automotive brake linings, refer to the friction materials fixed on the brake drum or brake disc rotating with the wheels. The friction linings and friction blocks within them bear external pressure, generating friction to achieve the purpose of vehicle deceleration. The Verna has a length, width, and height of 4340mm, 1700mm, and 1460mm respectively, with a wheelbase of 2570mm. The practicality of the Verna sedan's overall configuration is quite good, with all models equipped with dual airbags, engine electronic anti-theft devices, multifunction steering wheel, etc., providing great convenience for daily driving.
Was this review help?
9
2
Share
More Forum Discussions

What causes a Volkswagen to have no response when starting?

There are several reasons why a Volkswagen may not respond when starting, including incorrect gear position, low battery power, ignition system failure, or issues with the fuel system. When a vehicle fails to start, it is important to promptly diagnose and fix the problem to avoid further damage to the car. Incorrect gear position: If the gear is not placed correctly when starting, the car may not respond. Only by placing the gear in P (Park) or N (Neutral) can the car be started normally. Low battery power: When the car battery is dead, the car won't start. There are many reasons for a dead battery, such as lack of water in the battery, battery failure, or prolonged use of electrical components. If the vehicle cannot start due to a dead battery, jump-starting can be used to start the car. If the battery is faulty, it should be repaired at a specialized auto repair shop. Ignition system failure: The car's ignition system is responsible for providing high-voltage electricity to the spark plugs at regular intervals to ensure the car runs properly. If the car fails to start and the battery is ruled out, the issue may lie with the ignition system. Poor connections in the low-voltage circuit or leakage in the high-voltage wires can cause ignition system failure, affecting the car's performance and making it difficult to drive. This issue also requires inspection and repair at a repair shop, as ignition system problems are complex and should be handled by professionals. Fuel system issues: Insufficient fuel, fuel pump failure, or fuel line blockage can prevent the car from starting. If the issue is lack of fuel, the fuel gauge on the dashboard should be checked regularly while driving, along with the tachometer and speedometer. If the problem is a faulty fuel pump or blocked fuel line, it is recommended to seek professional auto repair services.
7
1
Share

How to Turn on the Headlights of Borgward?

Method to turn on the headlights of Borgward: The headlight switch is located on the lighting control lever to the left of the steering wheel. Rotate the lever to the headlight symbol to turn them on. Headlights are mainly used for daily driving, nighttime, and poor visibility conditions to provide illumination and alert other vehicles, ensuring driving safety. Taking the Borgward BX7 as an example, this model is a mid-size car under the Borgward brand, with dimensions of 4715 mm in length, 1911 mm in width, and 1690 mm in height, and a wheelbase of 2760 mm. In terms of configuration, the car comes standard with a 12.3-inch LCD screen and is equipped with the BLink system, which enables functions such as requesting road assistance, locating the vehicle, checking vehicle status, sending navigation locations, and remote start.
4
2
Share

What to Do When a Wheel Gets Punctured by a Nail?

Solutions for a wheel punctured by a nail: 1. Place a warning sign: Park the car on the emergency lane or in a place where it does not obstruct other vehicles, and place a triangular warning sign 150 meters behind to alert oncoming traffic; 2. Check for air leakage: Apply soapy water to the punctured area and observe if bubbles form. Bubbles indicate air leakage, while no bubbles mean there is no leakage. Do not remove the nail; 3. Replace the spare tire: Do not continue driving. Instead, replace the tire with the spare on the spot. After changing the tire, drive to a repair shop promptly. If the nail is small, a simple tire repair may suffice.
8
4
Share

How to Replace the Spark Plugs on a Prado?

Prado spark plug replacement method: Remove the engine cover, clean the dust and oil around the high-voltage wire terminals, then use a socket wrench to loosen the fixing screws of the high-voltage wire terminals, unscrew the high-voltage wire terminals, use the socket to remove the spark plugs, and install the new spark plugs. The main types of spark plugs include: standard spark plugs, insulator-tip spark plugs, electrode spark plugs, seat-type spark plugs, pole-type spark plugs, and surface-gap spark plugs, etc. In terms of configuration, the Prado comes standard with ABS, ESC, tire pressure monitoring, cruise control, hill start assist, hill descent control, front and rear parking sensors, etc.
6
3
Share

Where is the car's air conditioning filter located?

The car's air conditioning filter is located behind the glove box, and in a few models, it is installed under the windshield on the passenger side. Under normal circumstances, it is recommended to replace the car air conditioning filter every 10,000 kilometers or about one year. If the vehicle is frequently driven in areas with severe air pollution, or if the owner pays more attention to the hygiene of the air conditioning and their own health, it is recommended to replace it every six months. The function of the air conditioning filter is to filter impurities such as dust particles in the air, providing clean air for the car's air conditioning system. It can improve air cleanliness, provide a good air environment for passengers in the car, and protect the health of the occupants.
7
1
Share

What is the reason for the heater not being hot after adding antifreeze?

After adding antifreeze, the heater not being hot may be due to a clogged radiator. Another possibility is that the cylinder head gasket has blown, causing the antifreeze to deteriorate. It is recommended to go to a 4S shop for maintenance and inspection. The car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate, and purify the air inside the compartment, providing a comfortable environment for passengers, reducing the driver's fatigue, and improving driving safety. The full name of antifreeze is antifreeze coolant, meaning it is a coolant with antifreeze function. It can prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head when the car is parked in cold winter.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.