Do Used Cars in 4S Stores Still Come with Warranty?

Where is the license plate number Ji E from?

Ji E is the license plate number for Xingtai City, Hebei Province. If you need to handle services such as license plate registration, annual inspection, or traffic violation processing, you can visit the Xingtai Vehicle Management Office. The English letters on the license plate represent the prefecture-level city code where the vehicle is registered. Generally, these codes are assigned by the provincial vehicle management office based on the status of each prefecture-level city, with A being the provincial capital, B the second-largest city, and so on. Below is relevant information about license plate numbers in Hebei Province: Shijiazhuang City (Ji A), Tangshan City (Ji B), Qinhuangdao City (Ji C), Handan City (Ji D), Xingtai City (Ji E), Baoding City (Ji F), Zhangjiakou City (Ji G), Chengde City (Ji H), Cangzhou City (Ji J), Langfang City (Ji R), Cangzhou City (Ji S), and Hengshui City (Ji T).

15

1

Share

What Causes High Idle Speed in Cars?

Here is a detailed explanation of the causes and solutions for high idle speed in cars: 1. Throttle valve sticking or not closing properly: If the engine idle speed drops to normal when the throttle lever is pushed in the closing direction, it indicates throttle valve sticking or improper closure. Solution: Replace the cable, remove the sticking parts, and clean the throttle body. 2. Additional air valve malfunction. Solution: Replace the additional air valve. 3. Idle speed control valve failure: Check for the sound of the idle speed control valve operation. If there is no sound, the control valve is faulty. Solution: Replace the control valve. 4. Water temperature sensor failure. Solution: Input an artificially low water temperature signal to the ECU. 5. Air conditioning switch or power steering pressure switch failure. 6. Crankcase forced ventilation valve failure. Solution: Replace the crankcase forced ventilation valve. 7. Air intake system leakage. Solution: Locate the leak, reseal or replace the relevant components. 8. Generator charging voltage too low. Solution: Inspect and repair the engine.

16

0

Share

What are the reasons for insufficient car tire pressure gauge?

Car tire pressure may be insufficient due to the following reasons: 1. The tire pressure has not been recalibrated. Simply recalibrate the tire pressure on the central control system. 2. If the tire pressure warning appears some time after inflating, but there is no puncture in the tire, it may be due to air leakage caused by wheel rim deformation. It is recommended to check the wheel rim and replace it if necessary. Regarding the relationship between tire pressure and car performance: 1. The relationship between tire pressure and load capacity: Tire pressure is an indicator of a car's load capacity. The load capacity of a car depends on the level of tire pressure. According to the relationship between the tire's load index, tire pressure, and load capacity, the higher the tire pressure, the greater the load capacity; the lower the pressure, the smaller the load capacity. 2. The relationship between tire pressure and car power performance: Tire pressure greatly affects the rolling resistance coefficient. When the pressure decreases, the rolling resistance coefficient increases rapidly because lower tire pressure causes greater deformation of the rolling tire, increasing hysteresis loss.

12

5

Share

What is the emission standard for the 2017 Volkswagen Lavida?

The 2017 Volkswagen Lavida adopts the China V emission standard, while the fully redesigned Volkswagen Lavida uses the China VI emission standard. The redesigned Lavida has both China V and China VI models. Compared to the China VI models, the China V models are priced lower. However, after the launch of the China VI models, it indicates that the China VI standard is about to be implemented. Once the China VI emission standard is in place, China V models cannot be registered or licensed in some regions. Information about vehicle emission standards is as follows: 1. The letters representing vehicle emission standards are: China I is I, China II is II, China III is III, China IV is IV, China V is V, and China VI is VI. 2. The China standard is a national standard formulated based on China's specific conditions. The European standard is the common standard for member countries of the European Community. The European standard is slightly higher than the China standard.

20

4

Share

What does passenger mean in a car?

The passenger in the car refers to the passenger seat. If it says passenger airbag, it indicates the co-pilot's airbag in the front passenger compartment; if it shows a passenger symbol with a seated figure, it represents the seat belt reminder for the front passenger and other passengers. Here is some related information about airbags: 1. Airbags are a car safety feature designed to protect occupants by automatically deploying during severe collisions. 2. The working principle of car airbags is that the sensor system continuously sends speed change information to the control unit, which analyzes and evaluates this data. 3. A car's airbag system consists of an inflation sensor and an inflation system. Its functions include: protecting occupants by reducing impact with interior objects, distributing head and chest collision forces more evenly, absorbing the kinetic energy of occupants, thereby complementing the effectiveness of seat belts.

20

0

Share

Is Wheel Balancing Still Needed After Wheel Alignment?

Performing a wheel alignment does not necessarily require a wheel balancing. However, when replacing or repairing a tire, if the tire is removed from the rim and then reinstalled, wheel balancing must be performed. Failure to do so can cause noticeable tire vibration at certain speeds. More details are as follows: 1. Wheel alignment involves adjusting the geometric angles of the tires, steering, suspension, and other components to ensure tight contact between the tires and the ground. The installation of a vehicle's four wheels, steering mechanism, and front and rear axles should maintain specific relative positions, which are standard values set by the manufacturer. Adjusting and restoring these positions is what wheel alignment entails. 2. Wheel balancing corrects the balance of the wheel (tire and rim assembly) to ensure the tire moves concentrically. Due to manufacturing variations, the mass distribution of a wheel is not perfectly uniform. When the wheel rotates at high speeds, this can lead to dynamic imbalance, causing wheel wobble and steering wheel vibration during driving. To prevent or eliminate this phenomenon, weights are added to the wheel in dynamic conditions to correct the balance at various edges.

10

2

Share

Do Used Cars in 4S Stores Still Come with Warranty?

Where is the license plate number Ji E from?

What Causes High Idle Speed in Cars?

What are the reasons for insufficient car tire pressure gauge?

What is the emission standard for the 2017 Volkswagen Lavida?

What does passenger mean in a car?

Is Wheel Balancing Still Needed After Wheel Alignment?

What is the normal water temperature for a sedan?

What Causes the Smell of Gasoline When Starting the Car?

Why can't the newly replaced driver's license from another location be found on 12123?

Can You Cross a Combination of One Dashed Line and One Solid Line?