Do Tires Come with a Warranty?

2 Answers
VonWalter
07/29/25 1:58pm
New car tires typically come with a warranty, usually lasting between 2-3 years. The tire warranty only covers quality issues such as bulges or blowouts, which require professional assessment by the manufacturer. If the issue is confirmed as a quality defect, the tire will be replaced free of charge. However, damages caused by external factors like impacts or punctures are not covered under the warranty, and the associated costs will be borne by the vehicle owner. Here are some habits that can help extend the lifespan of your tires: Regularly check tire pressure: Maintaining proper tire pressure is crucial for extending tire life. If the tire pressure frequently exceeds the normal level by 20%, the tire's lifespan may decrease by 10%. Conversely, if the pressure is consistently 30% below normal, the tire's lifespan could be reduced by 52%. Ensure consistent tire pressure: Tire pressure is vital for tire health. Underinflation can cause excessive deformation of the tire body, leading to cracks on the sidewalls and excessive heat buildup, which accelerates rubber aging, fatigue of the cord layers, and potential cord breakage. Periodically remove foreign objects from tires: While driving, small debris like gravel often gets lodged in the tire tread grooves. If these small stones are not removed promptly, they can puncture the tire over time, leading to air leaks or even blowouts.
Was this review help?
11
3
Share
ThomasMarie
08/13/25 5:34am
Tires definitely come with a warranty. As an experienced driver with over a decade behind the wheel, I've encountered many situations. New tires always have the manufacturer's warranty, usually valid for several years or tens of thousands of kilometers, mainly covering quality issues like bulges or cracks due to manufacturing defects. However, normal wear and tear or punctures from nails aren't covered. You need to keep your invoice and maintenance records safe, check tire pressure regularly, and avoid excessive wear or imbalance, as these can void the warranty. Once, when I had a tire issue, I contacted the brand and got a free replacement by presenting those documents. In short, understanding the terms clearly is crucial.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

How to Park a Car with Auto Hold?

The parking steps for a car with auto hold are: 1. Press the brake and shift into N gear; 2. Engage the electronic handbrake and release the brake; 3. Shift into P gear (parking gear) and turn off the engine. Auto hold refers to an automatic braking function. Once activated, there's no need to use the handbrake or electronic handbrake when stopping at traffic lights, simplifying the operation. For automatic transmission models, it also eliminates the need for frequent switching between D to N or D to P gears. The principle of auto hold is: The controller provides precise parking force through a slope sensor. During startup, the parking control unit calculates information from the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the car to start smoothly.
4
3
Share

Can drinking purified water be used as windshield washer fluid?

Windshield washer fluid cannot be replaced with drinking purified water, as purified water cannot thoroughly clean dirt on the windshield. It is necessary to use dedicated glass cleaner. Avoid using a mixture of dish soap and water, as although it can clean the vehicle's windshield, it has a corrosive effect on the wiper rubber strips, shortening the lifespan of the wipers. The method for adding windshield washer fluid is: 1. Open the hood and locate the windshield washer fluid filler port; 2. Open the cap and pour the washer fluid into the container; 3. Observe the liquid level until it reaches the marked line. The functions of windshield washer fluid are: 1. To clean the glass and maintain clear visibility; 2. To provide antifreeze and anti-fog properties; 3. To offer anti-static, lubrication, and anti-corrosion effects.
9
2
Share

What are the causes of brake failure in an air brake system?

The causes of brake failure in an air brake system are: 1. Insufficient brake air pressure; 2. Poor performance of the air compressor; 3. Low air pumping capacity; 4. No air or low pressure in the air reservoir. The working principle of an air brake system is: The air compressor driven by the engine compresses air and inputs it into the air tank through a one-way valve. After cooling in the wet air pipe, the air is divided into two circuits, one leading to the rear brake chamber and the other to the front brake chamber. The components of an air brake system include: air compressor, air dryer, four-line protection valve, main brake control valve, main brake relay valve, front brake chamber, combined brake chamber, parking and emergency brake valve, trailer brake valve, dual-line trailer brake control valve, trailer brake release valve, trailer load adjustment valve, and auxiliary air system components.
16
2
Share

Why is it difficult to start a van when the engine is cold?

The reasons why a van is difficult to start when the engine is cold are: 1. Air leakage in the intake system; 2. Fuel pressure is too low; 3. The air filter is clogged; 4. Faulty coolant temperature sensor; 5. Faulty air flow meter; 6. Malfunctioning idle control valve or additional air valve; 7. Cold start injector not working; 8. Fuel injector leakage; 9. Incorrect ignition timing; 10. Open circuit in the wiring from the start switch to the computer; 11. Cylinder compression pressure is too low. The solutions to the difficulty in starting a van when the engine is cold are: 1. Check the battery status; 2. Replace with suitable engine oil; 3. Replace spark plugs in time. Methods to warm up the engine are: 1. Drive after 30 seconds to 1 minute of idling; 2. Maintain low-speed driving; 3. Drive normally after the engine temperature rises to the normal operating temperature.
8
4
Share

How to Adjust the Time on the Highlander?

The method to adjust the time on the Highlander is: 1. Below the clock screen, there are time adjustment buttons, where 'h' stands for hours and 'm' stands for minutes; 2. Press the 'disp' button on the right side of the steering wheel to switch to the clock ('clock'), then press and hold to make the hour digits flash, allowing you to adjust the hours; 3. Press and hold for about 5 seconds to make the minute digits flash, and then adjust the minutes. Taking the 2020 Highlander as an example, its body dimensions are: length 4890mm, width 1925mm, height 1715mm, with a wheelbase of 2790mm and a fuel tank capacity of 72.5 liters. The 2020 Highlander features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.0L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 220 PS, a maximum power of 165 kW, and a maximum torque of 350 Nm, paired with a 6-speed automatic transmission.
8
3
Share

Can car keys be reprogrammed?

4S stores can configure new metal keys for car owners by querying the anti-theft password for key configuration in the database based on the vehicle license and the owner's ID card provided. After the car key matching is completed, the new key will be activated, and the lost key will become invalid immediately. Even if someone picks up the old key, they can only open the car door mechanically.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.