Do sedan exhaust pipes have drainage holes?

1 Answers
AlanDella
07/29/25 9:49pm
Sedan exhaust pipes do have drainage holes. The exhaust pipe is part of the engine's exhaust system, which includes the front exhaust pipe and the rear exhaust pipe. The exhaust system is responsible for discharging the waste gases produced by the engine while reducing the pollution and noise of the emitted gases. It consists of the exhaust manifold, catalytic converter, exhaust temperature sensor, car muffler, and tailpipe. The functions of a sedan exhaust pipe include: 1. Vibration damping and noise reduction; 2. Facilitating installation; 3. Extending the lifespan of the exhaust muffler system. Maintenance methods for the exhaust pipe are: 1. Avoid water entering the muffler when driving in the rain or washing the car; 2. Regularly clean the dirt inside the exhaust pipe.
Was this review help?
4
5
Share
More Forum Discussions

What does maxa/c mean in car air conditioning?

The A/C in a car refers to the air conditioning regulation system. Below is an introduction to A/C and related precautions: A/C in cars: It can be understood as air control or air conditioning, which achieves cooling or heating through different operation modes of the air conditioning compressor, thus having dual meanings of cooling and heating. After pressing the A/C button, the air conditioning starts to adjust the temperature according to the set value, and the air conditioning compressor will activate. If the car has been exposed to the sun for a long time outdoors, the correct approach is to first open the windows, turn on the air conditioning's external circulation mode to expel the hot air inside the car, wait a few minutes, then turn on the A/C switch and set the circulation mode to internal circulation. Precautions for A/C in cars: In summer, the A/C must be turned on in the car's air conditioning, otherwise the air blown out will not be cold. To quickly lower the temperature inside the car in summer, you can adjust the position of the air vents. According to the principle of air convection, hot air rises while cold air sinks. The air conditioning vents should be directed diagonally upwards, utilizing the rule that hot air rises and cold air sinks. As the cold air descends, it can rapidly cool the interior of the car. Additionally, avoid placing decorations in front of the air conditioning vents as they can affect the cooling efficiency.
15
1
Share

How many liters of engine oil should be added during the maintenance of Magotan B8?

During the maintenance of Magotan B8, 5.5 liters of engine oil can be added. The following are the related functions of engine oil: 1. Lubrication and friction reduction: A layer of oil film is formed on the surfaces of two sliding parts, so that friction does not occur when the parts are running, ensuring smooth operation. 2. Auxiliary cooling: When the engine is running, high temperatures are generated. When the oil reaches the running parts, it absorbs heat and then carries the heat away, assisting in the heat dissipation of the parts. 3. Cleaning: It can carry carbon deposits, sludge, and worn metal particles on engine parts back to the oil tank through circulation, and wash away dirt generated on the working surfaces of the parts through the flow of the lubricating oil. 4. Sealing and leakage prevention: The oil can form a sealing ring between the piston ring and the piston, reducing gas leakage and preventing external pollutants from entering. 5. Rust and corrosion prevention: The lubricating oil can adhere to the surface of parts to prevent contact with water, air, acidic substances, and harmful gases. 6. Shock absorption and buffering: When the pressure at the engine cylinder port rises sharply, suddenly increasing the load on the piston, piston chips, connecting rod, and crankshaft bearings, this load is transmitted and lubricated through the bearings, buffering the impact load.
14
4
Share

Is the Nissan Terra imported or domestically produced?

Nissan Terra is a domestically produced vehicle. Terra Performance: The Terra's 2.5-liter naturally aspirated engine has a maximum power output of 142 kW and a maximum torque of 245 Nm. This engine reaches its peak torque at 4000 rpm and its maximum power at 6000 rpm. It is equipped with C-VTC continuous variable valve timing system and multi-point fuel injection technology, featuring an aluminum alloy cylinder head and block. Reasons Not Recommended for Purchase: Most people do not recommend buying the Terra mainly because it offers poor value for money and lacks advantages compared to other Nissan products.
17
0
Share

What happens when the brake master cylinder of a Vizi is damaged?

When the brake master cylinder is damaged, the following issues may occur: oil leakage at the connection between the brake master cylinder and the vacuum booster or at the limit screw, poor or ineffective braking when the brake pedal is fully depressed, a soft feeling when pressing the brake pedal, vehicle deviation after braking, sudden brake failure, and the brake pedal not returning or returning slowly. Introduction to the brake master cylinder: Also known as the "brake master cylinder" or "brake main cylinder," it is a key component of the vehicle's braking system. Classification of brake master cylinders: Depending on the vehicle, they are divided into air brake master cylinders and hydraulic brake master cylinders. Generally, most passenger cars use hydraulic brake master cylinders, while commercial vehicles (such as trucks, buses, tractors, etc.) typically use air brake master cylinders.
1
5
Share

Where is the jacking point for the MG6?

The jack should be placed on the raised position next to the tire on the chassis. Purpose of car jacks: There are pneumatic jacks, electric jacks, hydraulic jacks, and mechanical jacks. Hydraulic and mechanical jacks are commonly used. Car jacks are used for changing spare tires, making it convenient to replace a flat tire when driving. Principle of hydraulic jacks: Hydraulic jacks operate based on Pascal's principle, which states that the pressure in a confined fluid is transmitted equally in all directions. Thus, in a balanced system, a small force applied to a small piston creates a larger force on a larger piston, maintaining the fluid's equilibrium.
13
0
Share

What causes the rattling noise in the left front door of an Audi A4L?

The rattling noise in the left front door of an Audi A4L is caused by a loose small cover at the rearview mirror screw. Reasons for door rattling: Aging door and window sealing strips, collision of seat belt buckles, improper adjustment of door hinges and lock posts, loose components inside the door trim panel, and displacement of door lock catches. Solutions for door rattling: The issue can be identified simply by the owner shaking the door by hand or pressing on the rattling area while driving. If the noise disappears, then the problem is located there, and it can be resolved by tightening the components. Additionally, cleaning the hinges and applying some grease can help.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.