Do Rear Wheels Need Wheel Balancing?

2 Answers
McTravis
07/29/25 6:45am
Rear wheels need wheel balancing. Generally, modern tires are tubeless, so when a tire needs to be repaired, it must be removed from the rim. Once it is removed, repaired, and reinstalled, wheel balancing is required. Reasons for Wheel Balancing: Wheel balancing refers to the balance between the wheels when the vehicle is in motion. To prevent an unbalanced state caused by uneven mass distribution in various parts of the vehicle during driving, wheel balancing is necessary. Benefits of Wheel Balancing: Regular wheel balancing not only extends the lifespan of the tires but also improves the stability of the vehicle while driving. It helps avoid traffic accidents caused by tire wobbling or bouncing at high speeds, which could lead to loss of control.
Was this review help?
19
2
Share
ClaraRose
08/12/25 10:08am
As a driver who frequently travels on highways, I truly believe that rear wheel balancing is necessary, especially when switching from city roads to long-distance driving. If the rear wheels are unbalanced, you'll feel noticeable vibrations when driving on highways, causing the entire car body to shake. This not only makes the ride uncomfortable but may also accelerate wear on other components. Once, after getting new tires, I didn't get them balanced, and the noise inside the car was as loud as a tractor while driving. It turned out to be a rear wheel issue, which was easily fixed at a professional shop—simple and cost-effective. Remember, all wheels should be checked regularly, typically every six months or whenever you change tires, to ensure smoother and safer driving and prevent minor issues from becoming major headaches. Paying attention to your vehicle's condition can save you a lot of trouble.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How many pure electric vehicles does Dongfeng have?

Dongfeng currently offers three pure electric vehicle models. The Fengguang e3 comes in three pure electric variants, all equipped with a 120kW motor that delivers a maximum torque output of 300N·m and a maximum range of 405km. The Fengguang e1 is powered by a 33kW permanent magnet synchronous motor with a maximum torque output of 125N·m, a maximum range of 271km, and a battery capacity of 26.8kWh. The Venucia T60EV features a 120kW motor capable of producing a maximum torque of 250N·m. Dongfeng Motor Corporation Limited is a centrally administered extra-large automobile enterprise headquartered in Wuhan. Its main businesses cover a full range of commercial vehicles, passenger vehicles, new energy vehicles, military vehicles, key automotive components and parts, automotive equipment, and related automotive services. The company operates in over 20 domestic cities, including Wuhan, Shiyan, Xiangyang, and Guangzhou, with an overseas R&D base in Sweden. It has established overseas manufacturing bases in regions such as the Middle East, Africa, and Southeast Asia, as well as overseas marketing platforms in South America, Eastern Europe, and West Asia. Dongfeng holds a 14% stake in the French PSA Group, making it one of PSA's three major shareholders.
5
2
Share

What Causes the Brakes to Harden When the Air Conditioning is Turned On in an Emgrand?

When the brakes harden with the air conditioning on in an Emgrand, it indicates an issue with the brake vacuum system. Brake Wear: Severe wear of the brake pads causes the expansion shaft to reach its maximum limit, jamming and failing to reset. This is common in older vehicles with prolonged use. Replace the brake pads. High Brake Line Resistance: Excessive resistance in the brake line is often due to internal rusting from water ingress, freezing, oil contamination, or dust accumulation causing stickiness. It is recommended to replace the brake line. Rear Brake Expansion Shaft Wear: Severe wear of the rear brake expansion shaft is common in older vehicles that have had brake pads replaced, where the working surface of the expansion shaft is heavily worn and jammed. Transmission Mechanism Wear: Issues such as improper brake line routing, aging or deformation of the line sheath, etc. Specific analysis is required for different models. If unable to resolve the issue independently, it is advisable to consult a professional mechanic.
13
1
Share

What are the engine technologies of the third-generation Haval H6?

Haval H6 is equipped with a 2.0GDIT engine developed by Honeywell Easycreat, whose business covers four major sectors: powertrain system, transmission system, electric drive system, and intelligent steering system. Powertrain options for Haval H6: Multiple powertrain combinations will be available, including 2.0T+8AT 48V mild hybrid mechanical four-wheel drive; 2.0T+8AT PHEV plug-in hybrid electric four-wheel drive; 2.0T HEV mild hybrid electric four-wheel drive, etc. Equipped with Volvo T8 powertrain, the mechanical performance is quite superior. Engines in other Haval models: Lynk & Co 05 is equipped with a 1.5T engine, which is an inline three-cylinder turbocharged engine jointly developed by Geely and Volvo. In terms of technology, it inherits a series of advanced technologies from the VEP4 2.0T model. It adopts technologies such as aluminum alloy cylinder block, direct fuel injection, water-cooled turbocharger, and dual VVT system. Additionally, it uses a long-life timing belt, which not only reduces engine noise and improves power but also enhances fuel economy.
5
0
Share

What is the fuel tank capacity of the Skoda Superb in liters?

The fuel tank capacity of the Skoda Superb is 68.5 liters, as officially announced. The Skoda Superb requires 95-octane fuel, with a fuel consumption of 5.9-6.7L per 100 kilometers. A full tank can cover a distance of 1022-1161km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. The fuel level is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity calibrated by the car manufacturer is from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is designed to allow for fuel expansion when the temperature rises, preventing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
6
5
Share

How to reset the tire pressure light on Q3?

Method to reset the Q3 tire pressure light: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Precautions for inflating tires: Always use a pressure gauge to check the tire pressure to avoid overinflation, which could cause the tire to burst. After stopping the vehicle, wait for the tires to cool down before inflating, as driving increases tire temperature, affecting the pressure. Check the valve stem. If the valve stem and core are not properly aligned, with protrusions, depressions, or other defects, it may hinder inflation and pressure measurement. Ensure cleanliness during inflation. The air being pumped in must not contain moisture or oil, as this could deteriorate and damage the inner tube rubber. Do not exceed the standard pressure excessively during inflation and then release air, nor should you overinflate due to prolonged inability to inflate while away. Exceeding the standard pressure too much can overstretch the cords, reducing their strength and affecting the tire's lifespan.
14
2
Share

Can a cross-province temporary license plate be used to register the vehicle locally?

Can a cross-province temporary license plate be used to register the vehicle locally? Yes, it is possible. Temporary license plates are categorized into administrative district temporary plates, cross-administrative district temporary plates, test vehicle temporary plates, and special vehicle temporary plates. If you need to drive across administrative districts, you must apply for a cross-administrative district temporary license plate. Process for registering a vehicle locally after purchasing it in another region: Ensure all vehicle documents are complete: After purchasing a vehicle in another region, you need to confirm whether the materials provided by the 4S store are complete, such as the car invoice, vehicle certificate, maintenance manual, etc. If the 4S store fails to provide any of these, it may affect the subsequent registration and maintenance of the new vehicle. Prepare a temporary license plate: Next, you need to prepare a temporary license plate, which can be requested from the car dealer or purchased separately. However, be sure to check the validity period of the temporary plate, as using an expired temporary plate may result in insurance claims being denied by the insurer. Drive the vehicle back to the registration location for registration: The owner must go to the local tax bureau to pay the vehicle purchase tax, after which they can proceed to the vehicle management office to register the new vehicle. According to regulations in China, as long as the vehicle has the four basic documents—a formal invoice, certificate of conformity, purchase tax receipt, and compulsory traffic insurance—it can be registered.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.