Do Pickup Trucks Run on Diesel or Gasoline?

What Causes the Thud Sound When Braking?

The reasons for the thud sound when braking are: 1. The sound produced by the ABS system in operation. ABS is the anti-lock braking system of the car, which only activates during emergency braking; 2. The sound from the braking system, which is produced by the transmission solenoid valve; 3. Loose components in the car's chassis. If the thud sound also occurs during light braking, or if the vehicle does not have an automatic transmission lock button and the sound persists or occurs intermittently, then it is important to pay attention. It is highly likely that there is a fault in the braking system or a loose connection in the chassis. For safety reasons, it is recommended that the owner take the car to a 4S shop for inspection and repair as soon as possible.

1

2

Share

Where is the Vehicle Frame Number Located?

Location of the vehicle frame number: Except for trailers and motorcycles, the frame number should be fixed on one of the door hinge pillar, door lock pillar, or the pillar on the door edge that connects with the door lock pillar, near the driver's seat. If such a location is not available, it will be fixed on the left side of the dashboard. If that is also not possible, it should be fixed on the inner side of the door near the driver's seat. The frame number is also known as the Vehicle Identification Number (VIN), which consists of seventeen letters or numbers and can identify the car's manufacturer, engine, chassis serial number, and other performance data. To avoid confusion with the numbers 1, 0, and 9, the letters I, O, and Q are not used. There are mainly two formats for vehicle identification numbers: the first is the ISO 3779 standard adopted by the European Union, and the second standard is mainly used in North America, both of which are compatible with each other.

7

4

Share

Is a 245 tire considered very wide?

245 tires are considered very wide. The related introduction of tires is as follows: Introduction 1: Tires are round elastic rubber products assembled on various vehicles or machinery for rolling on the ground. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance. Introduction 2: Tires are often used under complex and harsh conditions. During driving, they endure various deformations, loads, forces, and high and low-temperature effects. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. They are also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Half of the world's rubber consumption is used for tire production, which shows the significant ability of tires to consume rubber.

11

5

Share

What are the correct steps for one-button start and stop in an automatic transmission car?

The correct steps for one-button start and stop in an automatic transmission car are: 1. After sitting in the driver's seat, do not press the brake pedal. Press the start button once, and after the ACC light turns on, press it once more to initiate the vehicle's self-check. 2. Ensure the handbrake is engaged and the gear is in P or neutral. Press the brake pedal and then press the start button again to ignite and start the engine. 3. Release the foot brake. You may choose to warm up the car for 1 to 3 minutes, depending on the temperature gauge on the dashboard. When the pointer reaches 90 degrees, the warm-up is complete. 4. Press the foot brake again, shift to D gear, and release the handbrake (for electronic handbrakes, simply press the button briefly). 5. Observe the road conditions, paying attention to vehicles behind and pedestrians on the side. Turn on the turn signal when starting, slowly release the foot brake, and gently press the accelerator to complete the start. The correct steps for stopping an automatic transmission car are: 1. Release the accelerator and press the brake pedal to bring the vehicle to a smooth stop. 2. Shift the gear from D to N. 3. Engage the handbrake (for electronic handbrakes, pull it upward). 4. Release the foot brake but do not turn off the power (this is to confirm that the car is completely stationary under the handbrake's effect, preventing the P gear from locking). 5. Continue pressing the foot brake and shift the gear from N to P. 6. Release the foot brake, press the start button to turn off the power, and the stopping process is complete.

12

1

Share

Can an A2 driver's license be renewed in advance?

A2 driver's license cannot be renewed in advance. It can only be renewed within 30 days after the end of the scoring cycle. According to Article 70 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," motor vehicle drivers must regularly undergo review at the traffic management department of the public security authority in accordance with laws and administrative regulations. When renewing a motor vehicle driver's license under Articles 57 and 58 of these regulations, the driver must undergo review by the traffic management department of the public security authority. Drivers holding licenses for large buses, tractors, urban buses, medium-sized buses, or large trucks must undergo review at the traffic management department of the public security authority within 30 days after the end of each scoring cycle. However, if there are no demerit points recorded during a scoring cycle, the review for that cycle is exempted.

14

2

Share

Can 4S shops modify cars?

4S shops cannot modify cars. It is best to go to a professional modification place. For registered motor vehicles, it is not allowed to arbitrarily change the registered structure, construction, or characteristics. Unauthorized changes to the vehicle's appearance, engine performance, or adding a turbocharger are all prohibited. If the owner really needs to modify the vehicle, they must first apply for record at the vehicle management office before proceeding with the modification. According to the "Motor Vehicle Registration Regulations": Article 9 states that applying to change the body color, replace the body or frame of a motor vehicle requires filling out the "Motor Vehicle Modification Registration Application Form" and submitting legal certificates and proofs. The vehicle management office shall make a decision to approve or disapprove the modification within one day from the date of acceptance. For approved modifications, the owner of the motor vehicle shall submit the vehicle for inspection to the vehicle management office within ten days after the modification. The vehicle management office shall confirm the motor vehicle within one day from the date of acceptance, retrieve the original driving license, and reissue a new driving license. Notes on vehicle modification: Replacing the headlights with xenon lamps is safe for driving itself, but drivers must comply with the regulation to switch from high beam to low beam when approaching an oncoming vehicle at about 100 meters at night, so as not to affect the visibility of other vehicles. Adding spoilers, car stickers, body kits, or modifying car audio systems generally do not affect safety and are therefore permissible. Installing a sunroof reduces the safety performance due to changes in the roof structure and load-bearing capacity. Changes and modifications to the engine are considered major modifications and must be applied for.

17

4

Share

Do Pickup Trucks Run on Diesel or Gasoline?

What Causes the Thud Sound When Braking?

Where is the Vehicle Frame Number Located?

Is a 245 tire considered very wide?

What are the correct steps for one-button start and stop in an automatic transmission car?

Can an A2 driver's license be renewed in advance?

Can 4S shops modify cars?

What brand is dueler tire?

How to Use the Autohold Function?

What is the purpose of engine start-stop technology?

Where is the negative terminal of the Honda Vezel battery located?