Do Passengers in the Back Seat Need to Wear Seat Belts?

1 Answers
VonLucy
07/30/25 6:45am
Passengers in the back seat should also wear seat belts. Here is relevant information about wearing seat belts: 1. Reasons why passengers in the back seat should wear seat belts: Data from the National Highway Traffic Safety Administration (NHTSA) shows that seat belts have saved as many as 13,941 lives in accidents. However, among the annual fatalities in car crashes, half of the victims still perish due to not wearing seat belts. In China, the probability of drivers using seat belts is less than 45%; for front-seat passengers, it is less than 17%; and for rear-seat passengers, it is less than 3%. If rear-seat passengers do not wear seat belts, during an accident, they may not only collide with the front seat backs but also hit the roof, door panels, or windows, leading to injuries. 2. The importance of seat belts: Seat belts are the lifelines of a car, providing protection for both drivers and passengers. When a car is traveling at high speed and experiences a collision or requires emergency braking, the enormous inertial force generated can cause the driver and passengers inside to collide with the steering wheel, windshield, or seat backs, resulting in severe injuries.
Was this review help?
5
1
Share
More Forum Discussions

What Causes a Car Gear to Get Stuck?

The reasons for a car gear getting stuck are as follows: 1. Malfunction in the gear lever assembly: Excessive wear of the internal gears in the gear lever causes it to get stuck, making it difficult to move forward or backward. 2. Faulty solenoid valve: The P-gear lock solenoid valve inside the gear lever or the brake switch may be faulty. 3. Incomplete clutch disengagement: This could be due to issues with the clutch disc or pressure plate, typically requiring the replacement of the clutch three-piece set. Precautions for driving an automatic car: 1. Avoid coasting in N-gear: When driving an automatic car, do not coast in N-gear. Some drivers also habitually coast without engaging any gear in manual cars, primarily to save fuel. However, this is different for automatic cars. Prolonged use of N-gear does not save fuel and may lead to insufficient oil supply to the transmission during coasting, resulting in severe consequences such as loss of vehicle control and major traffic accidents. 2. Parking method: After positioning the car in the parking spot, hold the brake, shift the gear lever to N-gear, engage the handbrake, release the foot brake, turn off the engine, and finally shift the gear lever to P-gear.
19
2
Share

Why is Ferrocene Banned in Gasoline?

Ferrocene is a metal anti-knock agent, and as a gasoline additive, it is harmful to the engine, spark plugs, oxygen sensors, and catalytic converters of vehicles. Additionally, the combustion-accelerating effect of ferrocene poses certain risks to engine safety, potentially causing rapid increases in cylinder wall temperatures beyond the engine's design limits. If heat dissipation is not timely, it could lead to cylinder block cracking. Therefore, extreme caution must be exercised when using ferrocene as a gasoline additive, paying close attention to dosage. Relevant information about gasoline is as follows: 1. Introduction: Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from petroleum through fractionation and cracking, used as fuel. It appears as a transparent liquid, is flammable, and has a distillation range of 30°C to 220°C. 2. Key Characteristics: The important characteristics of gasoline include volatility, stability, anti-knock properties, corrosiveness, and cleanliness.
11
5
Share

What Causes Frequent Activation of the Car Cooling Fan?

Here are the specific reasons for the frequent activation of the car cooling fan: 1. Fan aging: Since many engine fans are made of plastic and the engine compartment is constantly exposed to high temperatures, prolonged exposure can cause the components of the engine fan to deteriorate. 2. Sensor signal interference: The fan operates because it receives signals from the coolant temperature sensor and refrigerant pressure sensor, which control the fan's speed. If the sensors' signals are distorted due to external influences, this can ultimately affect the fan's operation. 3. Relay failure: Due to aging or other reasons, the fan's relay may remain in a constantly open state, preventing it from closing and causing the fan to malfunction.
10
2
Share

How to Remove the Transmission of Buick GL8?

The method for removing the transmission of Buick GL8 is as follows: 1. Remove the universal joint screws to separate the transmission from the universal joint of the drive shaft; 2. Remove the clutch cover screws to separate the transmission from the clutch; 3. Unscrew the oil drain plug to drain all the lubricating oil from the transmission; 4. Remove the transmission cover, first shaft, second shaft, intermediate shaft, and reverse shaft. The Buick GL8 is a 5-door, 7-seat MPV with body dimensions of 5238 mm in length, 1878 mm in width, 1776 mm in height, and a wheelbase of 3088 mm. The Buick GL8 is equipped with a 2.0T turbocharged engine, with a maximum power of 174 kW and a maximum torque of 350 Nm.
16
4
Share

What is the top speed of the Ferrari LaFerrari?

Ferrari LaFerrari has a top speed of 350km/h. Additional information is as follows: Ferrari LaFerrari: LaFerrari is a flagship supercar launched by Ferrari, making its debut at the Geneva Motor Show in March 2013 as a successor to the Ferrari Enzo, with a limited production of only 499 units. LaFerrari employs a hybrid system called HY-KERS, where a 6.3-liter V12 naturally aspirated engine delivers a maximum power output of 588 kW, and an electric motor independently provides 120 kW, resulting in a combined power output of 708 kW for LaFerrari. The LaFerrari accelerates from 0-100km/h in <3 seconds, 0-200km/h in <7 seconds, and 0-300km/h in just 15 seconds, with a top speed exceeding 350km/h. The car is driven by a hybrid powertrain. This hybrid technology, known as HY-KERS, represents the perfect integration of ultimate performance and low emissions. In fact, LaFerrari's CO2 emissions are only 330 grams per kilometer, not accounting for pure electric driving. LaFerrari is equipped with a dynamic vehicle control system, marking the first time this system has been integrated with active aerodynamics and the HY-KERS system in a road-going sports car. Thanks to Ferrari's patented logic chip that controls all onboard systems, LaFerrari uncompromisingly delivers extraordinary performance, aerodynamic efficiency, and handling.
9
4
Share

Where is the mechanical key for the BYD Song Pro?

The mechanical key for the BYD Song Pro is located inside the key fob. The method to extract the mechanical key is as follows: 1. Flip the switch behind the button; 2. Pull out the cover plate, pry open the cover to remove the back of the key, and then take out the mechanical key. The BYD Song Pro is a compact 5-door, 5-seat SUV with the following dimensions: length 4650mm, width 1860mm, height 1700mm, wheelbase 2712mm, and a fuel tank capacity of 63 liters. The BYD Song Pro is equipped with a 1.5T turbocharged engine, delivering a maximum power of 118kW and a maximum torque of 245Nm. It adopts a front-engine, front-wheel-drive layout, with a front MacPherson independent suspension and a rear multi-link independent suspension.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.