Do out-of-town vehicles need a Beijing entry permit when leaving Beijing?

1 Answers
DiBenjamin
07/29/25 9:29pm
Out-of-town license plates do not need a Beijing entry permit when leaving Beijing. However, a Beijing entry permit is required to enter within the Sixth Ring Road of Beijing. All non-local vehicles entering within the Sixth Ring Road of Beijing (excluding the Sixth Ring Road) or traveling in restricted areas of Changping, Huairou, and Yanqing County towns must apply for a Beijing entry permit. The following materials are required to apply for a Beijing entry permit: 1. The driver's ID card. 2. A valid motor vehicle driver's license. 3. The motor vehicle registration certificate. 4. A valid compulsory motor vehicle traffic accident liability insurance certificate. 5. A valid motor vehicle safety technical inspection qualification mark. 6. A certificate confirming the vehicle meets environmental protection requirements, as approved by the local environmental protection authority. Note: The validity period of the Beijing entry permit is 7 days and can be extended once.
Was this review help?
9
3
Share
More Forum Discussions

How to Fold Down the Rear Seats in a Car?

To fold down the rear seats in a car, follow these steps: 1. Open the car door and locate the latch for the back seat. 2. Pull the handle and recline the rear seat at the appropriate angle. 3. Some seats can be folded; pull the black strap under the trunk seat backward, then lift the seat upward. The rear seats can be folded in the following proportions: 1. One-third fold-down. 2. Two-thirds fold-down. 3. Full rear seat fold-down. Proportional fold-down of the rear seats means that two or one of the three rear seats can be folded, meeting both the needs of rear passengers and cargo storage. This not only expands the trunk space but also enhances the flexibility of usage.
14
3
Share

What Causes Brake Vibration When Braking at High Speeds?

Car brake vibration when braking at high speeds is caused by: 1. Uneven brake disc surface with excessive radial runout; 2. Significant deviation in wheel alignment data; 3. Excessive or insufficient tire pressure; 4. Abnormal tire wear; 5. Rim deformation. The maintenance methods for brakes include: 1. High-temperature protection to prevent brake system corrosion, avoid brake pad seizure due to high temperatures, and eliminate brake squeal; 2. Regular replacement of brake fluid; 3. Cleaning oil stains, dirt, and friction dust from brake discs, brake drums, and any components to ensure good heat dissipation of the brake discs; 4. Regularly checking the thickness of brake pads or brake shoes.
16
3
Share

How Many Liters of Engine Oil Does a Land Rover Range Rover 5.0 Require?

Land Rover Range Rover 5.0 requires approximately 9 liters of engine oil. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To reduce gas leakage and prevent external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and parts; 4. To buffer the pressure rise in the engine cylinder port; 5. To flush away dirt generated on the working surfaces of parts. Taking the 2021 Land Rover Range Rover 5.0 as an example, its body structure is a 5-door, 5-seat SUV, with body dimensions of: length 5000mm, width 2073mm, height 1869mm, a wheelbase of 2922mm, a fuel tank capacity of 104 liters, and a trunk capacity ranging from 707 to 1694 liters.
1
3
Share

Where is the engine number of Mazda CX4 located?

Mazda CX4's engine number is located on the cylinder block on the intake side of the engine. The function of the engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning and expanding the gas in the sealed cylinder, thereby pushing the piston to perform work. Engine maintenance items include: 1. Regularly change the engine oil and oil filter; 2. Keep the crankcase well ventilated; 3. Regularly clean the crankcase; 4. Regularly clean the fuel system; 5. Regularly maintain the radiator; 6. Maintain and clean the fuel system. Taking the 2021 Mazda CX4 as an example, its body structure is a 5-door, 5-seat SUV with body dimensions of: length 4637mm, width 1855mm, height 1524mm, a wheelbase of 2700mm, a fuel tank capacity of 45 liters, and a curb weight of 1493kg.
20
2
Share

Why can't the newly replaced driver's license be registered on 12123?

The newly replaced driver's license cannot be registered on 12123 because there is a delay in system information updates. The vehicle management office's database has not been synchronized and updated in time, making it impossible to check online. You need to wait until the system data synchronization is completed before you can view it. It may also be because the correct issuing address of the driver's license was not selected during registration, causing some data to not display or be delayed. You need to select the driver's license transfer and transfer it to the issuing address of the driver's license for it to be displayed. Below is additional information: 1. Traffic Management 12123: Traffic Management 12123 is the official client of the Internet Traffic Safety Comprehensive Service Management Platform, supported by the Traffic Management Science Research Institute of the Ministry of Public Security. It provides comprehensive traffic safety services for vehicle owners and drivers, including: personal user registration on the Internet service platform, appointment, acceptance, and processing of vehicle/driver's license/violation handling services, traffic safety information inquiries, service notifications and reminders, service guidance, road access services, and more. 2. Main functions: user registration; binding personal vehicles and driver's licenses; handling of traffic violations recorded by electronic monitoring equipment; appointment for driver's license tests; pre-selection of new vehicle license plates. Replacement of vehicle registration certificates, license plates, driver's licenses, and replacement of vehicle safety technical inspection qualification marks; extension of driver's license renewal, extension of review, and extension of submission of physical condition certificates; inquiries and notifications of vehicle and driver's license-related information; navigation to traffic management-related service locations; newly added online self-service traffic violation handling functions.
6
5
Share

What does 84t on a tire mean?

84t on a tire refers to the tire's load index and speed rating. The number 84 indicates that each tire can bear a maximum weight of 500kg, while the letter t signifies that the tire can withstand speeds of up to 190 kilometers per hour. The functions of tires include: 1. Transmitting driving force, braking force, and steering force to enable vehicle operation; 2. Supporting the vehicle's load; 3. Reducing and absorbing vibrations and impacts during driving to prevent severe vibrations from damaging vehicle components. As one of the crucial components of a vehicle, tires directly contact the road surface and work in conjunction with the vehicle's suspension to mitigate shocks during driving. This ensures good ride comfort and smooth driving, maintains excellent adhesion between the wheels and the road surface, enhances the vehicle's traction, braking, and off-road capabilities, and supports the vehicle's weight.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.