Do new energy vehicles require a driver's license?

1 Answers
DeJocelyn
07/23/25 9:33pm
New energy vehicles require a driver's license. The specific reasons and types of licenses are as follows: Specific reasons: As long as it is a motor vehicle, a legal driving license must be obtained. The traffic law clearly stipulates the type of driver's license required for new energy vehicles, which mainly depends on the type of vehicle the new energy vehicle is, and has little to do with the type of energy. Types of licenses: If the new energy vehicle is a small car or a low-speed cargo truck, a C1 license is required. If the new energy vehicle is a medium-sized passenger car or a large truck, a Class B license is required. If the new energy vehicle is a large passenger car, a tractor, or a city bus, a Class A license is required. Both Class A and Class B licenses can be used as Class C licenses. The new energy vehicle must match the driver's license, otherwise the traffic police may impound the vehicle and the license.
Was this review help?
10
2
Share
More Forum Discussions

How to Fold the Rearview Mirror of the Hongqi H5?

To fold the rearview mirror of the Hongqi H5, turn the rearview mirror folding button on the driver's door to the off position, or manually fold it after getting out of the car. Below is some relevant information about the Hongqi H5: 1. The rearview mirror switch for the Hongqi H5 is located on the driver's door. Except for the base model, which only has rearview mirror adjustment, other configurations include electric rearview mirror adjustment, electric folding, heating, and automatic folding when the car is locked. 2. The rearview mirror is a tool that allows the driver to directly obtain external information about the rear, sides, and lower parts of the car while seated in the driver's seat. For the convenience of the driver and to prevent traffic safety accidents and ensure personal safety, all countries require that cars must be equipped with rearview mirrors, and all rearview mirrors must be adjustable in direction.
11
3
Share

What is the working principle of the electric power steering system?

Working principle of the electric power steering system: 1. The torque sensor is connected to the steering shaft. When the steering shaft rotates, the torque sensor starts working, converting the relative angular displacement between the input shaft and output shaft caused by the torsion bar into an electrical signal and transmitting it to the ECU. 2. The ECU determines the rotation direction of the motor and the magnitude of the assist current based on signals from the vehicle speed sensor and torque sensor, thereby achieving real-time control of power steering. Additional information about the electric power steering system: 1. The electric power steering system utilizes the power generated by the motor to assist the driver in steering operations. 2. The electric power steering system mainly consists of three major components: signal sensing devices (including torque sensor, steering angle sensor, and vehicle speed sensor), steering assist mechanism (motor, clutch, reduction transmission mechanism), and electronic control unit.
15
3
Share

What does 'Don't repair the brake pads' mean?

The brake pads are no longer usable and need to be replaced. Below is additional information on brake pad maintenance: Avoid sudden braking: Emergency braking causes significant damage to brake pads. When driving normally, pay attention to braking gradually or use intermittent braking to minimize wear on the brake pads. Reduce braking frequency: Develop the habit of minimizing brake usage during normal driving. You can first use engine braking to reduce speed before applying the brakes for further deceleration or stopping. Downshifting more often while driving can help achieve this. Break-in period after replacing brake pads: After installing new brake pads, be sure to pump the brakes several times to eliminate the gap between the pads and rotors. Additionally, new brake pads require a 200-kilometer break-in period to achieve optimal braking performance, so drive cautiously immediately after replacement.
2
1
Share

How Much Engine Oil Does the Tiggo 8 Require?

The Tiggo 8 generally requires 4L of engine oil. This amount ensures the oil level on the dipstick remains between the minimum and maximum marks. Below are six key benefits of engine oil: 1. Lubrication & Friction Reduction: Forms an oil film between sliding components to prevent direct friction and ensure smooth operation. 2. Cleaning & Dispersion: High-quality oil circulates to flush away surface contaminants and traps tiny metal particles, which are then scraped into the oil pan by piston rings. 3. Cooling: Absorbs and dissipates heat from high-temperature engine components during operation. 4. Sealing: Creates an oil film seal between piston rings and cylinders to prevent exhaust gas leakage into the crankcase. 5. Anti-Corrosion: Adheres to parts, shielding them from air, acidic substances, and harmful gases to prevent rust and corrosion. 6. Shock Absorption: Cushions sudden high loads on pistons, piston rings, connecting rods, and crankshaft bearings by distributing pressure through lubricated surfaces.
19
0
Share

Should a new car use 95 or 92 octane fuel?

Gasoline octane rating represents anti-knock performance, where a higher number indicates better anti-knock capability. It has no relation to the quality of the gasoline itself, nor does it mean that higher octane fuel contains fewer impurities. Every new car's manufacturer manual specifies the recommended use of either 92 or 95 octane gasoline - simply follow the manual's recommendation for your specific model. Below are key points about 92 and 95 octane gasoline: 1. The most commonly used gasoline grades for gasoline engines are 92 and 95 octane. In reality, there's no difference in fuel quality between these two grades. 2. 92 octane gasoline consists of 92% isooctane and 8% n-heptane, while 95 octane contains 95% isooctane and 5% n-heptane. The different proportions of isooctane and n-heptane in these two fuel grades result in varying anti-knock performance, with higher isooctane purity providing stronger anti-knock properties.
5
2
Share

How to Adjust the Time on Passat Lingyu?

Locate the two buttons on the instrument panel. The right button is for time adjustment—press it once to increase the value. Then press the left button twice to switch to minute adjustment. After adjusting, press the left button once again to complete the time setting on the instrument panel. Below is an introduction to the Volkswagen Passat Lingyu: 1. The Passat Lingyu is a new series product upgraded from the Shanghai Volkswagen Passat B5, officially launched on November 24, 2005. The overall dimensions of the Passat Lingyu are slightly increased in length and width compared to the B5. The interior features an added fuel tank cover on the left front door (the B5 design placed it next to the handbrake) and a remote trunk button. 2. The B-pillar inside the car has been equipped with a clothes hook, and the previously bare rear center armrest of the B5 now includes a more practical storage box. The design of the rear air conditioning vents—both aesthetically pleasing and functional—plays the most significant role in enhancing rear-seat comfort.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.