Do new energy vehicles pay purchase tax?

What engine does the 2009 Yuexiang have?

The 2009 Yuexiang 1.5 engine model is JL475Q7. Below are the specific details about the Yuexiang: 1. The Yuexiang is a compact sedan under Changan's brand. The 2009 Yuexiang has a wheelbase of 2515 mm, with length, width, and height dimensions of 4360 mm, 1710 mm, and 1475 mm respectively. The 2009 Yuexiang is exclusively available in a sedan body style. 2. The 1.5-liter naturally aspirated engine in the 2009 Yuexiang delivers a maximum power of 72 kW and a peak torque of 137 N·m. This engine achieves its maximum torque at 3500 to 4500 rpm and reaches maximum power at 5500 rpm. It features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. The engine is paired with either a 5-speed manual transmission or a 4-speed automatic transmission (4AT). 3. The 2009 Yuexiang employs a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.

9

4

Share

What is the working principle of the Focus sensor?

The working principle of the Focus crankshaft position sensor is to provide signals for ignition timing and confirm the position of the crankshaft, which are used to detect the top dead center of the piston, the angle of the crankshaft, and the engine speed. The following is the removal method for the Focus crankshaft position sensor: 1. During removal, disconnect the sensor wiring harness from the main wiring harness near the rear of the intake manifold. 2. Remove the nut securing the crankshaft position sensor wire clamp on the fuel pipe mounting bolt, then remove the crankshaft position sensor mounting bolt. 3. Remove the crankshaft position sensor and the clamp for the crankshaft position sensor wiring harness. 4. During installation, insert the projection of the crankshaft position sensor into the hole in the transmission housing so that the end face is flush. 5. Install and tighten the two mounting bolts of the crankshaft position sensor with a torque of 17-21 N·m. The two bolts used to secure the crankshaft position sensor to the transmission are specially designed to ensure the correct gap between the sensor and the flywheel. Other bolts must not be used as substitutes for these special bolts. 6. Connect the wiring plug to the crankshaft position sensor, install the sensor wiring harness clamp, secure the clamp to the fuel pipe mounting bolt, and tighten the clamp's mounting nut.

10

3

Share

How much is the purchase tax for Haval H6?

Haval H6 purchase tax is calculated by multiplying the vehicle's taxable price by the tax rate (10%). The following are the specific details of Haval H6: 1. Vehicle Positioning: Haval H6 is positioned as a compact SUV, available in Blue Label and Red Label versions. 2. Powertrain: It is equipped with two engines: 1.5T and 2.0T. The 1.5T engine has a maximum power of 124kW and a peak torque of 285Nm; the 2.0T engine has a maximum power of 145kW and a peak torque of 355Nm. 3. CVVL Technology: The 1.5T engine features CVVL technology. CVVL technology primarily allows for adjusting the timing of valve opening and closing, valve lift, and duration, ensuring the engine receives sufficient air intake under different operating conditions, thereby improving engine efficiency.

7

2

Share

Is it okay to buy a car with a replaced radiator frame?

If the radiator frame is detachable and the vehicle's body frame has not been damaged, then it is acceptable to purchase. Here are some considerations when buying a used car: 1. Check the electronic devices inside the car: Ensure that all electronic devices and buttons are functioning properly, including the sunroof. Remember to operate them multiple times. 2. Inspect the A-pillar for cracks to determine accident history: Look for any welding marks on the A-pillar. While this method may seem straightforward and effective, be aware that once some car's seals are removed, they may not fit back properly, making it difficult to restore them to their original position. Additionally, there is a risk of breaking the clips on the interior panels.

9

1

Share

How to Use ETC on Highways?

To use ETC on highways, simply insert the ETC card into the sensor. The vehicle can then pass through the dedicated ETC lane normally. The ETC system will read the data, automatically raise the lane barrier, and allow the vehicle to pass smoothly. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. A red light will briefly illuminate, and the OLED screen will display "Tag Invalid, Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield. The chip should be inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Promotes green and low-carbon travel. Vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Cost-saving: Reduces expenses by decreasing the frequency of vehicle starts and stops, lowering wear and tear, and improving fuel efficiency. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC systems faster, more advanced, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

14

5

Share

What is the difference between the S6 and RS6?

The differences between the S6 and RS6 are as follows: 1. Type difference: The S6 is a top-tier luxury car and belongs to the sports model category. The Audi S6 is equipped with a 4.0T twin-turbocharged engine, accelerating from 0 to 100 km/h in just 4.16 seconds based on actual tests. 2. Chassis comparison: Another notable feature of the S6 is its lower chassis, significantly shorter than the A6L, primarily designed for high-speed stability. Consumers need not worry about ground clearance, as the S6 is equipped with an air suspension system that allows manual adjustment of the chassis height. 3. Exterior differences: The Audi S6 comes with all-weather headlights, highway lights, and full LED headlights. The Audi A6, on the other hand, features a complete trapezoidal grille, optimized for heat insulation and dissipation, which is a key visual differentiator between these two luxury cars in the market. 4. Weight comparison: Compared to the A6L, the Audi S6 incorporates up to 20% more aluminum components in its body, along with high-strength and ultra-high-strength steel, and the advantage of a standard wheelbase, effectively reducing its weight to 1895kg, which is considerably lighter than the A6L's top configuration of 2005kg.

18

0

Share

Do new energy vehicles pay purchase tax?

What engine does the 2009 Yuexiang have?

What is the working principle of the Focus sensor?

How much is the purchase tax for Haval H6?

Is it okay to buy a car with a replaced radiator frame?

How to Use ETC on Highways?

What is the difference between the S6 and RS6?

How to Replace the Air Filter in a Volkswagen Lavida?

Which button is used to spray washer fluid on the Tiggo 5x?

Is a 10-year-old Acura MDX worth buying used?

How to Turn on the Air Conditioning in a Magotan?