Do New Cars Need to Replace Antifreeze?

1 Answers
LylaRose
07/24/25 11:17pm
New cars do not need to replace antifreeze as they come with factory-installed antifreeze, which is of high quality and will not cause issues like overheating or cracking. Typically, antifreeze should be replaced every two years or every 30,000 kilometers. The method for replacing antifreeze is as follows: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a focus on the five-way hose. Antifreeze flows through the five-way hose and is then distributed to different parts of the car to function. If there is any leakage of antifreeze in this area, replace the hose or resecure the connection as needed. Drain the old antifreeze, then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir and continue to pour water into the reservoir, allowing it to flow continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will have a faint pink color. Continue adding clean water until the water flowing out is clear. Note: Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new antifreeze through the radiator hose. Then, add another bottle of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is expelled from the cooling system. Add more antifreeze until the level reaches the "MAXT" mark on the reservoir.
Was this review help?
2
5
Share
More Forum Discussions

What are the functions of the buttons inside the Magotan?

Explanation of the central control buttons in the Volkswagen Magotan is as follows: sync: Dual-zone air conditioning switch, models equipped with this feature allow separate temperature control for the driver and front passenger. Electronic Stability Program (ESP): Enabled by default, it is generally not recommended to turn it off except on slippery surfaces like rain or snow. Hazard warning lights (commonly known as hazard lights): Serve as a warning and are used in emergencies or special situations. Volume adjustment buttons: Besides adjusting the volume, they can also be used to skip tracks. Parking radar/camera: The central display shows the rearview image, and the radar emits an alert when detecting nearby obstacles. Driving assistance system: Includes functions like pre-collision protection, close distance warning, and fatigue reminder. Auto Hold: Reduces foot fatigue at traffic lights by automatically locking the wheels with the brake calipers. The wheels unlock when the accelerator pedal is pressed, allowing the car to move forward. Auto Start-Stop: When activated, the engine temporarily shuts off. It restarts as soon as the foot leaves the brake pedal.
1
3
Share

How many seconds does the Ford Mustang take to accelerate from 0 to 100 km/h?

Different engine displacements of the Mustang result in varying times for accelerating from 0 to 100 km/h. Below is a comparison and detailed introduction based on two Mustang engines: Acceleration times for the two engines: The Mustang with a 2.3-liter four-cylinder turbocharged engine achieves a 0-100 km/h acceleration time of 5.9 seconds; the Mustang with a 5.0-liter V8 naturally aspirated engine achieves a 0-100 km/h acceleration time of 4.76 seconds. Detailed introduction of the two engines: The 2.3-liter four-cylinder turbocharged engine produces 299 horsepower and a maximum torque of 434 Nm. This engine delivers its maximum power at 5,600 rpm and reaches peak torque at 3,000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. Paired with this engine is a 10-speed automatic transmission (10AT). The 5.0-liter V8 naturally aspirated engine generates 466 horsepower and a maximum torque of 556 Nm. This engine reaches its maximum power at 7,000 rpm and peak torque at 4,600 rpm. It employs multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. Paired with this engine is also a 10-speed automatic transmission (10AT).
14
3
Share

What Are the Benefits of Using a Naturally Aspirated Engine?

The benefits of using a naturally aspirated engine include smoothness, linearity, long lifespan, lower price, and lower fuel consumption. Details are as follows: Smoothness: A naturally aspirated engine runs very smoothly, providing a comfortable driving experience. Linearity: The acceleration of a naturally aspirated engine is more linear, without the abruptness of a turbocharged engine. Long Lifespan: The internal structure of a naturally aspirated engine is simpler, and since naturally aspirated engines have been developed for a longer time, the technology is more mature. This results in a longer lifespan for naturally aspirated engines, making them more reliable. Additionally, maintenance costs are relatively lower. Lower Price: For the same car model, the naturally aspirated engine option is the least expensive. Lower Fuel Consumption: Naturally aspirated engines generally have lower fuel consumption. Even if fuel consumption is similar, naturally aspirated engines have lower fuel quality requirements, indirectly reducing vehicle maintenance costs.
12
0
Share

What Does Prolonged Car Idling Mean?

Car idling refers to an operating condition where the engine runs without any load. When the engine is running but the accelerator pedal is neither fully released nor pressed, the engine is in an idling state. If this state persists for an extended period, it is considered prolonged idling. Below are extended details on the hazards of prolonged idling to a car: 1. Fuel consumption: Different vehicles consume varying amounts of fuel while idling. Some vehicles may consume 1L of fuel after idling for over an hour, while others may consume even more, possibly reaching 6 to 7 liters. 2. Exhaust emissions: During idling, the engine produces a significant amount of exhaust gases, leading to increased emissions. 3. Increased risk of accidents: If the engine remains in an idling state for a long time, the vehicle's braking system may loosen, increasing the likelihood of the car rolling away. 4. Risk of damaging the catalytic converter: Prolonged idling results in excessive engine exhaust, and unburned fuel mixture may ignite at the catalytic converter's location, easily causing damage to it.
7
5
Share

What is the real fuel consumption of the 2011 Citroen C-Quatre?

1.6L manual transmission model has a fuel consumption of 8.9 liters per 100 kilometers, while the automatic transmission model consumes 10.1 liters per 100 kilometers. The 2.0L manual transmission model consumes 9.2 liters per 100 kilometers, and the automatic transmission model consumes 10.8 liters per 100 kilometers. The C-Quatre is a compact car under Citroen, available in both hatchback and sedan versions. Below is an introduction to the C-Quatre: 1.6L naturally aspirated engine: Delivers 106 horsepower and a maximum torque of 142 Nm. This engine reaches its peak torque at 4000 rpm and its maximum power at 5750 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. Paired with this engine is either a 5-speed manual transmission or a 4AT transmission. 2.0L naturally aspirated engine: Produces 147 horsepower and a maximum torque of 200 Nm. This engine achieves its peak torque at 4000 rpm and its maximum power at 6000 rpm. It is equipped with CVVT (Continuous Variable Valve Timing) system and multi-point fuel injection technology, also using an aluminum alloy cylinder head and block. This engine is matched with either a 5-speed manual transmission or a 4AT transmission. Suspension: The C-Quatre uses a MacPherson independent suspension at the front and a variable crossbeam suspension at the rear, with the rear suspension also featuring a stabilizer bar.
18
2
Share

What Causes a Motorcycle to Fail to Start and Make a Ticking Sound?

The reasons why a motorcycle fails to start and produces a ticking sound include fuel system failure, electrical circuit failure, and air pressure failure. Specific details are as follows: Fuel system failure: Mainly caused by the fuel switch not supplying fuel, clogged fuel filter, carburetor not delivering fuel or having an overly rich mixture, and bent fuel pipes. Electrical circuit failure: Short circuits in the entire electrical system (e.g., ignition switch, ignition coil, ignition module, and magneto failure) or open circuits caused by loose wiring harness connectors. Air pressure failure: Insufficient cylinder compression, improper air intake resistance of the air filter element, and engine intake or exhaust faults, among others. If the above issues occur: It is recommended to take the motorcycle to a professional repair shop for inspection and repair.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.