Do motorcycles need inspection?

1 Answers
LaElena
07/30/25 5:28am
Yes. Here are the specific details about motorcycle annual inspection: 1. Detailed explanation: Motorcycles also require annual inspection. Generally, licensed motorcycles need to be inspected every two years. After a motorcycle has been in use for four years, it must undergo an annual inspection every year. 2. Required documents: The owner only needs to bring their driver's license, vehicle registration certificate, and compulsory motor vehicle traffic accident liability insurance policy to participate. If everything goes smoothly, all the procedures for the annual inspection can be completed in about two hours, which is very convenient. Some owners are enthusiastic about modifications and may add small accessories or change the color of the motorcycle after purchase. Modified motorcycles cannot pass the annual inspection. Owners must make the necessary adjustments before the inspection to pass it.
Was this review help?
16
1
Share
More Forum Discussions

How many inches is a 245 tire?

245 tire refers to a tire that is 245mm wide. The following is a related introduction about tire size: 1. Tire width: Tire width is one of the factors that affect the vehicle's fuel consumption performance. The wider the tread, the larger the contact area with the ground, the greater the friction, and the higher the fuel consumption. 2. Aspect ratio: Tires with a higher aspect ratio have longer sidewalls, providing better comfort, but the disadvantage of a high aspect ratio is weaker lateral resistance during turns. 3. Tire size speed rating: Car tires limit the speed, and different tires have different speed standards. It is essential to strictly adhere to the tire's speed limit during driving, otherwise, it will significantly reduce the tire's service life and increase the risk of a blowout.
19
5
Share

What is the recommended tire pressure for 750 steel radial tires?

750 steel radial tires should be inflated to approximately 9 bars. Below is relevant information about steel radial tires: 1. Overview: The model designation for all-steel radial tires should be "750R16". Without considering the vehicle's powertrain and overload factors, these tires can carry 10-12 tons, with recommended pressures of 8.5 bars for front tires and 10 bars for rear tires. 2. Tire model explanation: "75" represents the tire's aspect ratio, which is the ratio of tire width to height. Here it indicates the tire height is 65% of the tire width - the smaller this number, the flatter the tire appears. "R" denotes the tire's structure, meaning it's a radial tire where the cord plies are arranged radially in the tire body. "16" indicates the tire diameter in inches.
20
0
Share

What are the common issues with the steering gear of the new Excelle?

The common issue with the steering gear of the new Excelle is the steering wheel not returning to center. The related solutions are: Adjust the four-wheel alignment: Generally, when a vehicle exhibits the phenomenon of the steering wheel not returning to center, the four-wheel alignment can be adjusted. Four-wheel alignment refers to the relative positional relationship between the wheels and the chassis (wheels, steering knuckle, front axle, etc.). If the four-wheel alignment parameters change, issues such as incorrect steering direction, heavy steering, steering deviation, and tire wear may occur. Replace the steering gear: If the steering wheel still does not return to center after adjusting the four-wheel alignment, then the cause can be ruled out as the four-wheel alignment. After excluding the four-wheel alignment, the most likely cause is the steering gear. When the steering gear malfunctions and the reverse efficiency decreases, the steering wheel will be difficult to return to center.
6
0
Share

Why does the engine hood of the Tiguan pop up by itself?

Car fuel tank cap pops out due to fuel tank cap malfunction. Extended information about car fuel tank caps is as follows: 1. Fuel tank cap location: The fuel tank cap refers to the cap on the car's fuel tank used for storing gasoline. The fuel tank cap may be located on the left or right side of the vehicle body. Sometimes when refueling, one may forget which side the fuel tank cap is on. Actually, there is an arrow indicator on the car's dashboard fuel gauge - the direction the arrow points indicates which side the fuel filler is located. 2. Fuel tank cap opening methods: There are two types - press-type and switch button-type. The press-type opening method is very simple. When the car is unlocked, simply press the fuel tank cap with your hand to open it. This opening method is more common in American and German cars. The switch button-type is controlled by a switch button inside the car. The location of this switch varies in different car models. When refueling, the fuel tank cap needs to be opened using the interior switch.
2
4
Share

Are Changan Ford and Changan Automobile the same company?

Changan Ford and Changan Automobile are not the same company. Changan Automobile is a state-owned brand, while Changan Ford is a joint venture brand jointly invested by Changan Automobile and Ford Motor Company. The relevant introduction of Changan Automobile is as follows: Changan Automobile: Changan Automobile refers to the models produced by Changan's No. 3 and No. 5 factories, which are independently produced domestically. Changan Ford, on the other hand, is a joint venture between Changan and Ford, mainly producing models such as Ford Fiesta, Ford Focus, and Ford Mondeo. Changan Ford: Changan Ford belongs to the Changan Ford vehicle series. Ford Motor Company mainly includes three vehicle series: Changan Ford, imported Ford, and Jiangling Motors. Currently, Changan Ford's models on sale include seven models: Focus, Mondeo, Edge, Fiesta, Kuga, EcoSport, and Escort.
17
4
Share

Why doesn't the van move after starting and shifting gears?

The main reasons why the vehicle doesn't move after starting and shifting gears are: 1. Handbrake not released: The handbrake is not fully released or forgotten to be released. It is recommended to check whether the handbrake of the vehicle is fully released; 2. Clutch failure: Check whether the vehicle's drive shaft is rotating. If it does not rotate, it indicates a failure in the transmission system or clutch system. The transmission cover should be removed to check whether the shift fork is broken and whether the guide block fixing screw is loose. Sometimes, excessive or insufficient free travel or clearance of the clutch can also cause the vehicle not to move after shifting gears; 3. Gear failure in the rear axle system: If the drive shaft rotates, it indicates a gear failure in the rear axle system. Check the corresponding faulty parts one by one. If the problem cannot be resolved, please contact a service station for repair.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.