Do Motorcycles Have Oil Filters?

Why Can't You Say 'Fill It Up' When Refueling?

The reasons why you shouldn't fill the fuel tank to the brim are as follows: 1. Safety hazard: When the fuel tank is completely filled, due to the principle of thermal expansion, if the vehicle is exposed to direct sunlight, the volume of gasoline will expand, causing increased internal pressure in the fuel tank. This may lead to deformation of the fuel tank. Additionally, gasoline may leak out through the tank's vent, which is why some vehicles may have gasoline near their rear wheels. 2. Performance impact: Overfilling the tank can easily block the fuel tank vent. When the vent is blocked, negative pressure builds up inside the tank, resulting in poor fuel supply or even complete fuel cutoff.

9

5

Share

How to Determine if an Engine Has Seized?

Engine seizure refers to a situation where the engine temperature becomes excessively high, causing the piston to expand and deform, getting stuck in the cylinder, and resulting in engine failure. Here are the details: 1. Introduction to Engine Seizure: In a gasoline engine, the process of combustion after the air-fuel mixture enters the combustion chamber is highly complex and requires precise design and control. If there is a control error or malfunction, abnormal combustion can occur, and "engine seizure" is one form of abnormal combustion. Simply put, engine seizure is caused by abnormal combustion leading to irregular pressure in the combustion chamber. 2. Causes of Engine Seizure: Design flaws. Engine seizure in a car is often due to quality issues in the vehicle. Design defects, such as poor engine cooling, can cause the engine temperature to exceed its maximum tolerance, leading to seizure. Insufficient lubrication. Engine oil plays a crucial role in lubrication. If the oil quality is poor or the oil fails to circulate properly, its lubricating performance is compromised, and cooling issues arise, which are also major causes of engine seizure. Excessive engine load. Overuse of the engine or operating under high loads can also lead to seizure. Faults in the intake/exhaust system or ignition timing. Incorrect adjustments in the engine's intake/exhaust system or ignition timing can similarly result in engine seizure.

9

1

Share

What causes the JMC SVS light to come on and diesel power loss?

JMC SVS light coming on and diesel power loss may be caused by poor engine combustion state; engine knocking; poor quality of automotive fuel; unclean engine cylinder interior with accumulated carbon deposits; or the electronic control unit being unable to obtain engine data. Below is an introduction to JMC: 1. Corporate Culture: JMC's corporate culture construction has always focused on tracking the most advanced product technologies, the latest business concepts, and management methods to become a leading modern enterprise in the industry. Through open concepts and an aggressive systematic planning and corporate culture development strategy, JMC has achieved outstanding performance in both economic development and cultural construction by building good vehicles, training the best employees, and shaping a first-class corporate image. 2. Technological Development: JMC absorbs the world's most cutting-edge product technologies, manufacturing processes, and management concepts. An effective equity balance mechanism, highly transparent operations, and high-level business management have enabled the company to form a standardized management and operation system, with scientific systems ensuring the effectiveness of corporate governance and scientific decision-making. JMC has established research and development, logistics, sales services, and financial support systems that comply with international standards, making it a successful model of cooperation between local Chinese enterprises and foreign capital.

2

Share

How many years of driving experience is required to upgrade from C1 to A2?

You cannot directly upgrade from C1 to A2. If you already hold a C1 driver's license, the fastest way to obtain an A2 license is to upgrade to a B1 or B2 license after holding the C1 license for one year. After obtaining the B1 or B2 license, you need three years of professional driving experience before you can apply for the A2 license. Therefore, upgrading from C1 to A2 requires at least four years. There is also a second method for upgrading, which is to directly obtain a B2 driver's license. After holding the B2 license for three years, you can then upgrade to the A2 license. This method is faster, but it does not involve upgrading from a C1 license. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 123) of the People's Republic of China, the following conditions must be met for upgrading a driver's license: Article 14: If you already hold a motor vehicle driving license and wish to apply for an additional permitted vehicle type, you must not have accumulated 12 penalty points in the current scoring cycle or the most recent scoring cycle before the application. For applications to add medium-sized buses, tractors, or large buses to the permitted vehicle types, the following additional conditions must be met: To apply for adding medium-sized buses to the permitted vehicle types, you must have held a license for urban buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, or three-wheeled vehicles for at least three years and must not have accumulated 12 penalty points in the most recent three consecutive scoring cycles before the application. To apply for adding tractors to the permitted vehicle types, you must have held a license for medium-sized buses or large trucks for at least three years, or have held a license for large buses for at least one year, and must not have accumulated 12 penalty points in the most recent three consecutive scoring cycles before the application. To apply for adding large buses to the permitted vehicle types, you must have held a license for medium-sized buses, urban buses, or large trucks for at least five years, or have held a license for tractors for at least two years, and must not have accumulated 12 penalty points in the most recent five consecutive scoring cycles before the application. In temporary residence areas, you can apply to add the following vehicle types to your license: small cars, small automatic transmission cars, low-speed trucks, three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles. Article 15: The following circumstances disqualify you from applying for large buses, tractors, medium-sized buses, or large trucks as permitted vehicle types: Being responsible for a traffic accident resulting in death with equal or greater liability; Driving a motor vehicle under the influence of alcohol; Having your motor vehicle driving license revoked or rescinded within the past ten years. According to the "Permitted Vehicle Types and Codes" (Ministry of Public Security Order No. 139) of the People's Republic of China: The A1 permitted vehicle type is large buses, which allows driving large passenger vehicles, and also permits driving A3, B1, B2, C1, C2, C3, C4, and M vehicle types. According to the "Permitted Vehicle Types and Codes" (Ministry of Public Security Order No. 139) of the People's Republic of China: The A2 permitted vehicle type is tractors, which allows driving heavy and medium-sized full trailers and semi-trailer vehicle trains, and also permits driving B1, B2, C1, C2, C3, C4, and M vehicle types.

5

1

Share

What Causes Motorcycle Engine Overheating?

Motorcycle engine overheating generally occurs due to: 1. Prolonged riding in hot weather with excessive vehicle load; 2. Some inherent issues with the vehicle itself. Below are the specific impacts of engine overheating: 1. Reduced engine power: When operating in temperatures above 35°C (95°F), with tailwinds, or under heavy load at low speeds, engine overheating becomes more severe, further decreasing the engine's air charging efficiency. This results in less fresh air-fuel mixture entering the cylinders, lowering the mean effective pressure and reducing engine power output. 2. Increased fuel consumption: High engine temperatures can cause lubricating oil entering the cylinders to form carbon deposits under high-temperature oxygen-deficient conditions. These deposits accumulate on piston crowns, combustion chamber walls, valve heads, and spark plugs, creating hot spots that lead to abnormal combustion (pre-ignition). This can cause deformation of engine blocks and cylinder heads, potentially leading to cracks or warping, as well as cylinder head gasket failure. The resulting compression loss at the end of the compression stroke increases fuel consumption. 3. Accelerated component wear: High temperatures cause lubricating oil to oxidize and degrade, forming sludge and deposits that adhere to piston rings, cylinder walls, and other friction surfaces, reducing heat transfer efficiency. The oil's viscosity decreases, oil pressure drops, and lubricating properties deteriorate. The oil film on cylinder walls weakens under impact loads, significantly accelerating component wear.

14

3

Share

Why does the battery not charge fully and get hot?

The reasons why the battery does not charge fully and gets hot are as follows: 1. Battery aging, battery water loss, battery plate sulfation; 2. Damaged wiring; 3. Poor fuse contact; 4. Poor internal plug contact; 5. Damaged charger; 6. Circuit board failure. Below are some battery maintenance tips: 1. Avoid not turning off the air conditioning when the engine is off: The air conditioning consumes a lot of power. Some drivers are accustomed to not turning off the air conditioning when the engine is off, which causes the air conditioning to automatically start the next time the vehicle is started. This leads to an instantaneous high power load on the vehicle, which can damage the battery over time. 2. Regularly wipe the battery: Use a damp cloth to periodically clean the exterior of the battery, removing dust, grease, white powder, and other contaminants that can cause leakage from the panel and the positive and negative terminals. Regular cleaning prevents excessive buildup of white acid corrosion powder on the terminals and extends the battery's lifespan. Special grease can be applied to the terminals to protect the battery. 3. Prevent battery discharge: To prevent the battery from discharging, be especially careful not to use the car's CD player, cigarette lighter, or other charging devices for extended periods while the engine is off, as this consumes a significant amount of battery current. Discharging the battery easily leads to battery damage.

14

2

Share

Do Motorcycles Have Oil Filters?

Why Can't You Say 'Fill It Up' When Refueling?

How to Determine if an Engine Has Seized?

What causes the JMC SVS light to come on and diesel power loss?

How many years of driving experience is required to upgrade from C1 to A2?

What Causes Motorcycle Engine Overheating?

Why does the battery not charge fully and get hot?

What are the dimensions of a front-four-rear-eight vehicle in meters?

What is the correct way for a car to pass through deep water?

What is the English name for Xuan Yi?

Is the Left-Side Overtaking Always Fully at Fault?