Do Motorcycles Have Insurance?

1 Answers
VonElijah
07/30/25 7:54am
Motorcycles do have insurance, and the relevant explanations are as follows: 1. Introduction to Motorcycles: Like cars, motorcycles also belong to motor vehicles, so insurance can be broadly categorized into compulsory insurance and commercial insurance. The 'PICC Motorcycle Insurance Terms' stipulate that this insurance contract consists of insurance terms, application forms, insurance policies, endorsements, and special agreements. Any agreement related to this insurance contract shall be in written form. 2. Insurance-related knowledge: Specific insurance contents include compulsory traffic insurance, vehicle damage insurance, third-party liability insurance, theft insurance, passenger seat liability insurance, spontaneous combustion insurance, scratch insurance, etc. The specific cost of motorcycle insurance is related to the displacement of the motorcycle, with the specific classification standards being 50CC and 250CC.
Was this review help?
8
4
Share
More Forum Discussions

What are the symptoms of cylinder scuffing?

Cylinder scuffing may exhibit the following symptoms: 1. Reduced cylinder compression pressure leading to loss of power; 2. Downward leakage of combustible mixture increasing crankcase pressure, potentially causing crankcase explosion in severe cases; 3. Upward oil migration into cylinders resulting in oil burning; 4. Excessive smoke from exhaust pipe; 5. Abnormal engine noise; 6. Engine malfunction or even stalling. The causes of cylinder scuffing include: 1. Insufficient or interrupted cylinder lubrication; 2. Inadequate break-in period followed by immediate high-load operation; 3. Excessive piston temperature with poor lubrication; 4. Severe carbon buildup causing piston rings to stick in grooves, losing elasticity and potentially breaking or leaking combustion gases; 5. Use of low-quality gasoline. Solutions for cylinder scuffing are: 1. Replace pistons and piston rings; 2. Use high-quality engine oil; 3. Clean any foreign objects in the cylinder.
2
5
Share

Is it necessary to press the brake when starting a manual transmission car?

When starting a manual transmission car on a flat road, you can directly press the clutch without stepping on the brake, controlling the speed with the clutch, and then fully release the clutch after the start is completed; if starting on a slightly inclined surface, it is best to press the clutch while also stepping on the brake to prevent the car from rolling backward or lurching forward. Below is more information about manual transmissions: 1. Principle of manual transmission: Since the automatic torque conversion range of the hydraulic torque converter is not large enough, several rows of planetary gears are connected in series behind the turbine to improve efficiency. The hydraulic control system automatically operates the planetary gears according to the changes in the engine's operation, thereby achieving automatic torque conversion. 2. The primary function of the clutch is to ensure a smooth start of the car. Before starting the car, the engine must be started first. When the car starts, it gradually accelerates from a completely stationary state.
11
0
Share

What is the engine model of the Vios FS?

The engine model of the Vios FS varies depending on the displacement: 1. The 1.3L naturally aspirated engine model is 4NR-FE; 2. The 1.5L naturally aspirated engine model is 5NR-FE. Taking the 2021 Vios FS as an example, its body structure is a 5-door, 5-seat hatchback. The body dimensions are: length 4155mm, width 1700mm, height 1495mm, with a wheelbase of 2550mm, and a curb weight of 1085kg. The 2021 Vios FS features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 110PS, maximum power of 81kW, and maximum torque of 138Nm, paired with a 5-speed manual transmission.
7
0
Share

What are the steps to replace a spare tire?

The steps to replace a spare tire are: 1. Loosen the tire bolts; 2. Lift the vehicle with a jack; 3. Remove the bolts securing the wheel (counterclockwise to loosen, clockwise to tighten); 4. Remove the original tire and install the spare tire. Precautions for replacing a spare tire include: 1. Turn off the engine, engage the handbrake, and put the car in gear to prevent rolling; 2. Place a triangular warning sign and turn on hazard lights; 3. Tighten the bolts diagonally when replacing the spare tire; 4. Adjust the spare tire pressure with a pressure gauge before installation; 5. Replace the valve stem as well. Precautions for using a spare tire include: 1. Pay attention to speed limits; 2. Avoid prolonged use of the spare tire; 3. Perform regular maintenance on the spare tire; 4. Replace the spare tire periodically; 5. Keep the spare tire away from oil products.
6
5
Share

Does ETC need to be activated every time it is used?

ETC does not need to be activated every time it is used. ETC activation method: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth is on". If "Tag invalid" appears when inserting and removing twice without the electronic tag attached, it is a normal phenomenon and does not affect activation. You can also directly press the button on the top of the electronic tag to turn on the Bluetooth function. Turn on the mobile phone Bluetooth, open the corresponding mobile APP (usually there is a download QR code on the electronic tag), and enter the device activation interface. Click on device connection and wait patiently for the "Connection successful" prompt. After successful connection, upload a photo of the front of the vehicle to complete the activation. ETC installation position: For small vehicles such as cars and vans, the ETC card and OBU device are installed in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, the installation position is in the lower middle part.
14
0
Share

What Gear Should Be Used When Driving Uphill?

What gear to use when driving uphill depends on the type of vehicle: For manual transmission cars, you can use 2nd or 3rd gear when driving uphill; for automatic transmission cars, you can use S (Sport) mode or L (Low) gear, or simply D (Drive) gear. Manual transmission cars are vehicles that use a manual shift mechanical transmission to adjust speed. The driver must manually move the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve speed variation. The gear lever can only be moved when the clutch is depressed. Automatic transmission cars do not require the driver to shift gears manually; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The gears in an automatic transmission car include: 1. P (Park) for parking; 2. R (Reverse) for reversing; 3. N (Neutral) for neutral; 4. D (Drive) for forward driving; 5. M (Manual) for manual mode; 6. L (Low) for low gear; 7. S (Sport) for sport mode.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.