Do motorcycles have fuel injectors?

1 Answers
DelLena
07/30/25 1:12am
Motorcycles have fuel injectors. Each cylinder is equipped with one fuel injector and one spark plug. Definition of fuel injector: The fuel injectors used in modern cars are essentially simple solenoid valves. When the solenoid coil is energized, it generates a magnetic force that lifts the needle valve, opening the injection port. Fuel is then sprayed at high speed through the annular gap between the needle valve head and the injection port, forming a mist that facilitates complete combustion. Working principle of fuel injector: A fuel injector is a normally closed valve (a normally closed valve remains closed when there is no control signal input, whereas a normally open valve remains open when there is no control signal input). The opening and closing of the valve is controlled by the up and down movement of a needle valve.
Was this review help?
14
2
Share
More Forum Discussions

How to adjust the date on Nissan Teana?

Nissan Teana date adjustment method: After turning on, the CLK button displays and sets the time. Press and hold CLK for about 5 seconds until the time display flashes on the screen. Use the adjustment buttons (left turn decreases, right turn increases) to set the time, then press CLK again to confirm. The Nissan Teana is a flagship mid-to-high-end luxury sedan under the NISSAN brand, built on Nissan's FFL platform. It features a MacPherson strut front suspension system and a newly designed multi-link rear suspension. In terms of body dimensions, the Teana measures 4850mm in length, 1795mm in width, and 1475mm in height.
16
5
Share

What engine and transmission does the Baojun 510 use?

Baojun 510 is equipped with an L2B 1.5L naturally aspirated engine, with a maximum power of 82kW and a maximum torque of 147Nm, paired with a 6-speed manual transmission. In terms of body dimensions, the Baojun 510 measures 4220mm in length, 1740mm in width, and 1605mm in height, with a wheelbase of 2550mm. For interior configuration, the Baojun 510 features a black and brown color scheme, complemented by matte metal accents. In terms of features, the Baojun 510 comes with keyless start, an 8-inch floating central control screen, a flat-bottom steering wheel, automatic air conditioning, cruise control, and more. The suspension setup consists of a front MacPherson strut and a rear torsion beam non-independent suspension.
4
0
Share

How to Safely Pass Through Flooded Road Sections?

Safely passing through flooded road sections requires maintaining steady throttle, driving at a low gear with constant speed, and avoiding mid-way stops, sudden steering wheel turns, or gear shifts. When unsure about the road conditions, observe how preceding vehicles pass through the flooded area and follow their path for added safety. Avoid multiple vehicles consecutively entering the water to prevent disruptions in the normal driving of following vehicles if the leading vehicle encounters issues. If the vehicle stalls while passing through the flooded section, wait for rescue on the spot and never attempt to restart the engine forcefully, as this could cause deformation of critical components like the engine crankshaft and connecting rods, leading to secondary damage to the vehicle.
18
3
Share

How many kilometers should a car drive before cleaning carbon deposits?

It is recommended to clean carbon deposits every 10,000 kilometers for a car. Car owners can also decide based on their driving conditions. If driving on highways for long periods, the interval can be extended to 30,000 to 40,000 kilometers. For city driving, it is suggested to clean every 20,000 to 30,000 kilometers. Carbon deposits refer to a mixture accumulated on the engine's valves, combustion chamber, and intake pipes. Carbon deposits can be categorized into valve deposits, combustion chamber deposits, and intake pipe deposits. The hazards of carbon deposits include: 1. Damage to engine components; 2. Decreased engine performance; 3. Insufficient engine power; 4. Increased fuel consumption; 5. Increased emissions of tailpipe pollutants; 6. Difficulty in cold starts and abnormal noises during acceleration.
1
4
Share

How to Install the Wiper Blades on a Nissan Sylphy?

Nissan Sylphy wiper blade installation steps are: 1. Lift the wiper arm away from the windshield; 2. Press the release lock pin, then slide the wiper blade along the wiper arm; 3. Remove the old wiper blade; 4. Insert the new wiper blade into the wiper arm until you hear a click. Taking the Sylphy 2021 Classic 1.6XE Manual Comfort Edition as an example, it is equipped with a 1.6L 122HP L4 naturally aspirated engine, paired with a 5-speed manual transmission. Its body dimensions are: length 4631mm, width 1760mm, height 1503mm, with a wheelbase of 2700mm.
10
3
Share

How to Fix When the ABS Light Comes On in a Car?

Solutions for when the ABS light comes on in a car: 1. Do not continue driving or rely on the conventional braking system; proceed to an auto repair shop as soon as possible. 2. Open the front hood and inspect the wheel speed sensor and the wiring section of the ABS unit. 3. Check if the brake fluid is sufficient and within the upper and lower level marks. 4. Remove the speed sensors from all four wheels and check if the sensor heads have accumulated dirt. Reasons why the ABS light comes on: 1. ABS pump and pressure regulating solenoid valve failure. 2. Brake pads worn beyond the limit. 3. Sensor damage. 4. Insufficient brake fluid. 5. ABS computer malfunction.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.